PTC Creo simulate exam
1 module 1-9 questions &
answers
Creo Simulate Structure - ANSWERS_______________ enables the user to perform Static,
Modal, Buckling, Contact, Prestress Static, and Prestress Modal analyses.
all of the above. - ANSWERSUsing the Home tab, you can create
An analysis will always fail if the loads and constraints are applied before the properties are
defined. - ANSWERSWhich statement regarding the Simulate Structure process is FALSE?
False - ANSWERSTrue or False? Simulate can only analyze parts, not assemblies.
Plane symmetry - ANSWERSWhich model type is NOT an option in Simulate?
Simulate Structure - ANSWERS_______________ enables the user to perform Static, Modal,
Buckling, Contact, Prestress Static, Prestress Modal, and Vibration analyses.
False - ANSWERSTrue or False? The h- and p-versions of the finite element method are different
ways of adding degrees of freedom to the model.
False - ANSWERSTrue or False? The Distortion Energy theory is more conservative than the
Maximum Shear Stress theory.
the nodes. - ANSWERSTraditional finite element solvers calculate displacements at
, True - ANSWERSTrue or False? The strain energy of the total model and comparative stresses
may be used as convergence criteria in Simulate.
It uses the P element version of the Finite Element Method and enhances its own accuracy by
automatically adjusting the degrees of the polynomial shape functions until convergence is
achieved. - ANSWERSWhich statement best describes the analysis method used by Creo
Simulate Structure?
True - ANSWERSTrue or False? The Inheritance Feature is the feature to use if you want to keep
the simulation model independent from the CAD geometry.
True - ANSWERSTrue or False? The Remove Feature can be combined with the Inheritance
Feature.
all of the above. - ANSWERSTo prepare an existing CAD model
Both A and B. - ANSWERSWhere can you find the results of a user-defined measure after an
analysis has been run?
for all of the above. - ANSWERSMeasures can be used
The name, density, Poisson's ratio, and Young's modulus are required. - ANSWERSWhich fields
need to be defined in the Material Definitions dialog box for a static analysis with no thermal
loads?
Isotropic, transversely isotropic, and orthotropic materials - ANSWERSWhich type of materials
can be handled by Simulate Structure?
1 module 1-9 questions &
answers
Creo Simulate Structure - ANSWERS_______________ enables the user to perform Static,
Modal, Buckling, Contact, Prestress Static, and Prestress Modal analyses.
all of the above. - ANSWERSUsing the Home tab, you can create
An analysis will always fail if the loads and constraints are applied before the properties are
defined. - ANSWERSWhich statement regarding the Simulate Structure process is FALSE?
False - ANSWERSTrue or False? Simulate can only analyze parts, not assemblies.
Plane symmetry - ANSWERSWhich model type is NOT an option in Simulate?
Simulate Structure - ANSWERS_______________ enables the user to perform Static, Modal,
Buckling, Contact, Prestress Static, Prestress Modal, and Vibration analyses.
False - ANSWERSTrue or False? The h- and p-versions of the finite element method are different
ways of adding degrees of freedom to the model.
False - ANSWERSTrue or False? The Distortion Energy theory is more conservative than the
Maximum Shear Stress theory.
the nodes. - ANSWERSTraditional finite element solvers calculate displacements at
, True - ANSWERSTrue or False? The strain energy of the total model and comparative stresses
may be used as convergence criteria in Simulate.
It uses the P element version of the Finite Element Method and enhances its own accuracy by
automatically adjusting the degrees of the polynomial shape functions until convergence is
achieved. - ANSWERSWhich statement best describes the analysis method used by Creo
Simulate Structure?
True - ANSWERSTrue or False? The Inheritance Feature is the feature to use if you want to keep
the simulation model independent from the CAD geometry.
True - ANSWERSTrue or False? The Remove Feature can be combined with the Inheritance
Feature.
all of the above. - ANSWERSTo prepare an existing CAD model
Both A and B. - ANSWERSWhere can you find the results of a user-defined measure after an
analysis has been run?
for all of the above. - ANSWERSMeasures can be used
The name, density, Poisson's ratio, and Young's modulus are required. - ANSWERSWhich fields
need to be defined in the Material Definitions dialog box for a static analysis with no thermal
loads?
Isotropic, transversely isotropic, and orthotropic materials - ANSWERSWhich type of materials
can be handled by Simulate Structure?
