Auto200 level 1 bar smog inspector course Test Questions with Correct Answers
What are 2 types of tsi tests - Answers 2500 rpm test; idle test
What are two types of asm test - Answers 50/15 test; 25/25 test
What are the fuel caps that are used to calibrate the eis machine - Answers Known good and bad fuel
caps
What types of gases are used to calibratethe E I S machine - Answers
What does dad stand for - Answers Data acquisition device.
What completed copy of the invoice must the customer receive when they drop off their vehicle for
repairs? - Answers Written estimate.
What is the most important part of completed work order - Answers Customer authorization.
May a test and repair station sublet repairs? If so what repairs? - Answers Exhaust prior to repair
When performing a smog inspection the registration needs to compare to the vehicle, true or false -
Answers True
Are all of the required ECS components listed on the under hood in missions label - Answers No
Part of the ecs system has been removed from the vehicle. How should this be entered in the eis? -
Answers Missing
The belt is missing from the air pump. There is no visual evidence of tempering. How should it be
entered into the eis? - Answers Defective
What entry should be completed if the ignition system is COP? - Answers Not required
How is nox measured in california emissions test? - Answers
You see that oil is dripping from the engine before you start your eis emission test. What should you do?
- Answers Reject vehicle before customer leaves.
During the asm test the maintenance reminder light is on. What should the technician do? - Answers
Continue as normal, not a smog issue
What should you do if the VIN does not match the vehicle registration? - Answers Notify customer
The vehicle failed the emission test. You work at a inspection and repair facility. What should you do
next? - Answers
During the ASM test the EIS machine indicates "sample dilution" what should you do next? - Answers
How is an ASM test weight determined? - Answers Weigh vehicle on dyno
What are 2 types of tsi tests - Answers 2500 rpm test; idle test
What are two types of asm test - Answers 50/15 test; 25/25 test
What are the fuel caps that are used to calibrate the eis machine - Answers Known good and bad fuel
caps
What types of gases are used to calibratethe E I S machine - Answers
What does dad stand for - Answers Data acquisition device.
What completed copy of the invoice must the customer receive when they drop off their vehicle for
repairs? - Answers Written estimate.
What is the most important part of completed work order - Answers Customer authorization.
May a test and repair station sublet repairs? If so what repairs? - Answers Exhaust prior to repair
When performing a smog inspection the registration needs to compare to the vehicle, true or false -
Answers True
Are all of the required ECS components listed on the under hood in missions label - Answers No
Part of the ecs system has been removed from the vehicle. How should this be entered in the eis? -
Answers Missing
The belt is missing from the air pump. There is no visual evidence of tempering. How should it be
entered into the eis? - Answers Defective
What entry should be completed if the ignition system is COP? - Answers Not required
How is nox measured in california emissions test? - Answers
You see that oil is dripping from the engine before you start your eis emission test. What should you do?
- Answers Reject vehicle before customer leaves.
During the asm test the maintenance reminder light is on. What should the technician do? - Answers
Continue as normal, not a smog issue
What should you do if the VIN does not match the vehicle registration? - Answers Notify customer
The vehicle failed the emission test. You work at a inspection and repair facility. What should you do
next? - Answers
During the ASM test the EIS machine indicates "sample dilution" what should you do next? - Answers
How is an ASM test weight determined? - Answers Weigh vehicle on dyno
