Last RCO Final Exam Questions With
Guaranteed Pass Solutions.
If the tilt feature is allowed to time out, what brake
application will result? - Answer An emergency brake application
If the secondary operator places the RCT into
emergency, which RCO(s) must recover the
emergency? - Answer Both RCO's must perform the recovery procedure
The Secondary RCO must recover the emergency
application first
What are all movements in remote control operations
considered? - Answer Shoving movements
List the steps to recover an emergency brake
application - Answer 1. Place speed selector to stop
2. Move the independent brake override lever to emergency
3. Press the vigilance toggle
4. Place independent brake override lever to release
When the RCO uses cameras to protect a
road crossing what speed must movement
enter the crossing? - Answer 4 mph until the crossing is occupied
List the steps for recovering a full service brake
application - Answer 1. Move the speed selector to stop
2. Toggle the automatic brake selector to full
3. Press the vigilance toggle
4. Move the automatic brake selector to release
, What condition would cause a steady tone alarm? - Answer Tilting the RCT by more than 45
degrees
Which RCT component will send an emergency stop
command to the RCL? - Answer The independent brake override lever
How would a RCO respond when a beeping or
pulsing alarm sounds on the RCT? - Answer Press a vigilance toggle
What is the preferred method of slowing or stopping
your movement? - Answer Ramping the speed selector
or
Using the coast feature
If the primary RCT would fail, how would the
secondary RCO be able to continue working? - Answer Re-link as a single RCO
After making verbal confirmation, how does the
primary RCO initiate a pitch? - Answer Press the pitch button
How many seconds does the secondary RCO have to
accept the pitch? - Answer 10 seconds
How does the secondary RCO accept the pitch? - Answer Press the vigilance toggle
After initiating the pitch, how could the primary RCO
cancel it? - Answer Move any of the RCT levers or switches out of their
current position
Just before a coupling is made, what must
the RCO do to avoid "shock loading"
Guaranteed Pass Solutions.
If the tilt feature is allowed to time out, what brake
application will result? - Answer An emergency brake application
If the secondary operator places the RCT into
emergency, which RCO(s) must recover the
emergency? - Answer Both RCO's must perform the recovery procedure
The Secondary RCO must recover the emergency
application first
What are all movements in remote control operations
considered? - Answer Shoving movements
List the steps to recover an emergency brake
application - Answer 1. Place speed selector to stop
2. Move the independent brake override lever to emergency
3. Press the vigilance toggle
4. Place independent brake override lever to release
When the RCO uses cameras to protect a
road crossing what speed must movement
enter the crossing? - Answer 4 mph until the crossing is occupied
List the steps for recovering a full service brake
application - Answer 1. Move the speed selector to stop
2. Toggle the automatic brake selector to full
3. Press the vigilance toggle
4. Move the automatic brake selector to release
, What condition would cause a steady tone alarm? - Answer Tilting the RCT by more than 45
degrees
Which RCT component will send an emergency stop
command to the RCL? - Answer The independent brake override lever
How would a RCO respond when a beeping or
pulsing alarm sounds on the RCT? - Answer Press a vigilance toggle
What is the preferred method of slowing or stopping
your movement? - Answer Ramping the speed selector
or
Using the coast feature
If the primary RCT would fail, how would the
secondary RCO be able to continue working? - Answer Re-link as a single RCO
After making verbal confirmation, how does the
primary RCO initiate a pitch? - Answer Press the pitch button
How many seconds does the secondary RCO have to
accept the pitch? - Answer 10 seconds
How does the secondary RCO accept the pitch? - Answer Press the vigilance toggle
After initiating the pitch, how could the primary RCO
cancel it? - Answer Move any of the RCT levers or switches out of their
current position
Just before a coupling is made, what must
the RCO do to avoid "shock loading"
