LATEST 2024/2025 NCCER ELECTRICAL LEVEL 3
QUESTIONS AND ANSWERS / VERIFIED AND
ALREADY GRADED A+
A noncontinuous load of two 120V outlets for heavy-duty lamp holders
would have a load of - RIGHT ANSWER -1,200VA
A sign load cannot exceed - RIGHT ANSWER -80% of the branch circuit
rating
According to the NEC, the total load of show windows must be
calculated at not less than - RIGHT ANSWER -200VA per linear foot of
show window
Air conditioning overcurrent protective devices can never exceed what
percentage of the motor-rated load current or the branch circuit
selection current (whichever is greater)? - RIGHT ANSWER -225%
Conductors must be derated when installed in conduit - RIGHT ANSWER
-on or above rooftops
Continuous loads are calculated at what percentage of the maximum
current rating of the overcurrent device? - RIGHT ANSWER -80%
QUESTIONS AND ANSWERS / VERIFIED AND
ALREADY GRADED A+
A noncontinuous load of two 120V outlets for heavy-duty lamp holders
would have a load of - RIGHT ANSWER -1,200VA
A sign load cannot exceed - RIGHT ANSWER -80% of the branch circuit
rating
According to the NEC, the total load of show windows must be
calculated at not less than - RIGHT ANSWER -200VA per linear foot of
show window
Air conditioning overcurrent protective devices can never exceed what
percentage of the motor-rated load current or the branch circuit
selection current (whichever is greater)? - RIGHT ANSWER -225%
Conductors must be derated when installed in conduit - RIGHT ANSWER
-on or above rooftops
Continuous loads are calculated at what percentage of the maximum
current rating of the overcurrent device? - RIGHT ANSWER -80%
