Page |1
AVIXA CTS EXAM 2025
WITH 100% VERIFIED
SOLUTIONS
How is the volume of a space calculated - CORRECT-ANSWER-Length
times width times hight
What is the most important in formation to be gathered on a site visit -
CORRECT-ANSWER-room size and layout
what would be the volume of a room that measures 7 meters long by 6
meters wide and 3 meters high - CORRECT-ANSWER-126 meters =
7*6*3
, Page |2
What would a mechanical drawing be used for? - CORRECT-ANSWER-
location of heating , plumbing and ventilation in a venue
When conducting a site visit if a ladder is needed what type of ladder
should be used and why? - CORRECT-ANSWER-fiberglass or wood in
case a surface might be electrified
A scale drawing unit of 1/1:20 signifies what type of scale-drawing
measurement? - CORRECT-ANSWER-a common metric scale
When considering customer constraints for ___, the signal type,
distance from viewers, aspect ratio and source resolution are all
limiting factors. - CORRECT-ANSWER-image display
When documenting requirements for network services, a formal
technical document called a(n) _______ is often utilized. - CORRECT-
ANSWER-SLA( service level agreement)
AVIXA CTS EXAM 2025
WITH 100% VERIFIED
SOLUTIONS
How is the volume of a space calculated - CORRECT-ANSWER-Length
times width times hight
What is the most important in formation to be gathered on a site visit -
CORRECT-ANSWER-room size and layout
what would be the volume of a room that measures 7 meters long by 6
meters wide and 3 meters high - CORRECT-ANSWER-126 meters =
7*6*3
, Page |2
What would a mechanical drawing be used for? - CORRECT-ANSWER-
location of heating , plumbing and ventilation in a venue
When conducting a site visit if a ladder is needed what type of ladder
should be used and why? - CORRECT-ANSWER-fiberglass or wood in
case a surface might be electrified
A scale drawing unit of 1/1:20 signifies what type of scale-drawing
measurement? - CORRECT-ANSWER-a common metric scale
When considering customer constraints for ___, the signal type,
distance from viewers, aspect ratio and source resolution are all
limiting factors. - CORRECT-ANSWER-image display
When documenting requirements for network services, a formal
technical document called a(n) _______ is often utilized. - CORRECT-
ANSWER-SLA( service level agreement)