Three Different State Farm Estimatics Exam | 100% Correct Answers(packaged)

Three Different State Farm Estimatics
Exam | 100% Correct Answers(packaged)

Three Different State Farm Estimatics Exam | 100%
Correct Answers(packaged)


State Farm Estimatics Exam | 100% Correct Answers
The formula for determining the area of a trapezoid is:

Select the single best answer:
A. [(Base1 + Base2) ÷ 2] x Height
B. ½ Base x Height
C. Base x Height
D. 𝜋𝜋𝑟𝑟 (pi r squared) - Correct answer[(base1+base2) / 2] * height

The formula for determining the area of a triangle is:

Select the single best answer:
A. 𝜋𝜋𝑟𝑟 (pi r squared)
B. [(Base1 + Base2) ÷ 2] x Height
C. Base x Height
D. ½ Base x Height - Correct answerD. ½ Base x Height

The formula for determining the area of a circle is:

Select the single best answer:
A. ½ Base x height
B. 𝜋𝜋𝑟𝑟 (pi r squared)
C. [(Base1 + Base2) ÷ 2] x Height
D. Base x Height - Correct answerB. 𝜋𝜋𝑟𝑟 (pi r squared)

"On-center" is a term to describe the distance from the center of one framing
member to the center of the next framing member, i.e., studs, joist, rafters.

TrueFalse - Correct answerTrue

Select the False statement:

Select the single best answer:

A. Plywood, oriented strand board (OSB), fiberboard, and rigid insulating
panels are widely used for sheathing.
B. Wall sheathing reinforces the wall framing.
C. Sheathing adds rigidity, strength and some insulating qualities to
the wall of a structure.
D. Sheathing provides a flat surface backing for other products, such as siding.

,Three Different State Farm Estimatics Exam | 100%
Correct Answers(packaged)

E. The thickness of the sheathing has no affect on the cost of the material. -
Correct answerb. Wall sheathing reinforces the wall framing.

Which of the following components is not a part of a roof truss?
Select the single best answer:
A. Top Chord
B. Bottom Chord
C. Web
D. Bird's Mouth
E. Gussets - Correct answerBirds Mouth

Spaced (open) sheathing is normally used with composition shingles.
TrueFalse - Correct answer

Composition shingles can be purchased in bundles which could be ⅓ square or
¼ square.
TrueFalse - Correct answerTrue

Blanket insulation is an uncut roll of insulation cut to length at the job site. It is
used in walls and attics, and may or may not have a backing material.
TrueFalse - Correct answerTrue

Select the false statement.
Select the single best
answer:

A. Composition shingle weights range from 120 lb. to 480 lb. per square.
B. Composition shingles are made of fiberglass or asphalt saturated
roofing material embedded with mineral granules.
C. Wood roofing is generally divided into two categories, wood shingles
and wood shakes.
D. Rigid roofing materials include clay, concrete, metal, and slate.
E. All of the above are true. - Correct answerComposition shingle weights
range from 120 lb. to 480 lb. per square.

Non-masonry siding products such as wood, aluminum, vinyl, steel, and vinyl
clad siding are usually measured by the square foot, but the materials are
typically sold by the square (100 SF) or by the piece.
TrueFalse - Correct answerTrue

Select the false statement.
Select the single best
answer:

, Three Different State Farm Estimatics Exam | 100%
Correct Answers(packaged)

A. Vinyl clad siding is steel siding with a vinyl coating over it. It is more
dent-resistant than steel.
B. Vinyl siding is made of a rigid polyvinyl-chloride (PVC) compound. It
is tough, durable, and economical.
C. Aluminum siding has a baked-on enamel factory finished and can
provide an appearance closely resembling painted wood siding.
D. Vinyl clad siding is aluminum siding with a vinyl coating over it. It is
more dent resistant than aluminum and has less tendency to crack
than vinyl.
E. Steel siding is more durable than vinyl, aluminum, or vinyl clad siding. Like
aluminum siding, it has a baked-on enamel factory finish. - Correct
answerVinyl clad siding is steel siding with a vinyl coating over it. It is more
den-resistant than steel.

How many trusses (16" o.c.) are in a 35' 6" long gable roof with no overhang
on the gable ends?
Select the single best answer:
A. 28
B. 27
C. 26
D. 29 - Correct answer28

According to the "Average Size Door Opening Guideline," a missing wall
measuring 3'0" wide x 6'8" high would generally be subtracted from the
quantity of drywall needed for that room.
TrueFalse - Correct answerFalse

A room is 15' 3" long, 13' 5" wide with a ceiling height of 8', and the following
openings: Patio door 6'0" wide x 6'8" high
Entry door 2'6" wide x 6'8"
high Window 1 5'0" wide x
6'0" high
Window 2 3'0" wide x 6'0" high
How many square feet (SF) of drywall are on the walls and
ceiling? Select the single best answer:
388.70 SF
458.72 SF
593.36 SF
D. 588.75 SF - Correct answerB. 458.72 SF

A room is 15' 3" long, 13' 5" wide with a ceiling height of 8', and the following
openings: Patio door 6'0" wide x 6'8" high
Entry door 2'6" wide x 6'8"
high Window 1 5'0" wide x
6'0" high
Window 2 3'0" wide x 6'0" high
How many LF of baseboard are in the room?