When using a hammer probe to monitor strip hardwood flooring, the pins are inserted
into the dark winter wood for easier _____.
Give this one a try later!
repairs
,The water restoration industry
Give this one a try later!
S-500 is the standard of care in
Because of their non-invasive nature and quick surveying capabilities, non-invasive
meters are the most effective tools for locating abnormal moisture behind and beneath
finishing materials such as ________ ____ and resilient ______ floor coverings.
Give this one a try later!
ceramic tile / vinyl
12,000
Give this one a try later!
How many BTUs in a ton of air conditioning
When water intrusion results in standing water deeper than the wall plate (_____ ______), or
when water intrusion occurs from above and results in water running through wall
cavities, insulation must be closely evaluated.
Give this one a try later!
, bottom plate
If a structure had air at 85 degrees at 65% RH, the most efficient type of dehumidifier to
use would be a: REFRIGERANT / DESICCANT.
Give this one a try later!
refrigerant
Crawlspaces are commonly unclean; when dried, they are held under a _________ air
pressure relative to the _______ ________ of the house to prevent volatile organic compounds
and particulate from entering the air space above.
Give this one a try later!
negative air pressure / living area
When drying carpet and cushion in place, one way to determine the effectiveness of
extraction is by testing a portion of the extracted ___________.
Give this one a try later!
carpet padding.
, LGRs produce lower ________ _______ than conventional refrigerants and continue to remove
significant water vapor down to ______ GPP.
Give this one a try later!
Vapor Pressures / 34 GPP
When moisture levels are sufficient (about _______ moisture content in wood), mold can
grow on the surface of virtually any material. Dry wood to a moisture content below 16%.
Give this one a try later!
16%
Respiratory protection regulations state that the employer must provide these three
things:
Give this one a try later!
medical evaluations
fit testing
training
The most common causes of inaccurate thermo-hygrometer readings are: weak __________.
into the dark winter wood for easier _____.
Give this one a try later!
repairs
,The water restoration industry
Give this one a try later!
S-500 is the standard of care in
Because of their non-invasive nature and quick surveying capabilities, non-invasive
meters are the most effective tools for locating abnormal moisture behind and beneath
finishing materials such as ________ ____ and resilient ______ floor coverings.
Give this one a try later!
ceramic tile / vinyl
12,000
Give this one a try later!
How many BTUs in a ton of air conditioning
When water intrusion results in standing water deeper than the wall plate (_____ ______), or
when water intrusion occurs from above and results in water running through wall
cavities, insulation must be closely evaluated.
Give this one a try later!
, bottom plate
If a structure had air at 85 degrees at 65% RH, the most efficient type of dehumidifier to
use would be a: REFRIGERANT / DESICCANT.
Give this one a try later!
refrigerant
Crawlspaces are commonly unclean; when dried, they are held under a _________ air
pressure relative to the _______ ________ of the house to prevent volatile organic compounds
and particulate from entering the air space above.
Give this one a try later!
negative air pressure / living area
When drying carpet and cushion in place, one way to determine the effectiveness of
extraction is by testing a portion of the extracted ___________.
Give this one a try later!
carpet padding.
, LGRs produce lower ________ _______ than conventional refrigerants and continue to remove
significant water vapor down to ______ GPP.
Give this one a try later!
Vapor Pressures / 34 GPP
When moisture levels are sufficient (about _______ moisture content in wood), mold can
grow on the surface of virtually any material. Dry wood to a moisture content below 16%.
Give this one a try later!
16%
Respiratory protection regulations state that the employer must provide these three
things:
Give this one a try later!
medical evaluations
fit testing
training
The most common causes of inaccurate thermo-hygrometer readings are: weak __________.
