NIMS Core Machining Skills 121
Air Nozzle - ANS-A device used to spray air. Air nozzles can be utilized by an operator to
cast off chips from interior a CNC device.
Bore - ANS-A unmarried-factor slicing device used to increase a preexisting hollow. Boring,
which can be carried out on either a lathe or a mill, allows create a concentric hollow that
meets tight tolerances.
Brix Scale - ANS-A gadget used for measuring the concentration of a substance that has
been combined with water. The Brix scale is used along side a refractometer to decide the
attention of a fluid.
Burr - ANS-A difficult aspect last on fabric, such as steel, after it has been machined. Burrs
have to be removed throughout finishing approaches to improve the capability and look of a
component.
Calibration - ANS-The evaluation and adjustment of a tool with unknown accuracy to a tool
with a recognized, correct popular. Calibration removes any version in the device being
checked.
Carriage - ANS-The section of the lathe that slides from side to side longitudinally alongside
the methods. The carriage helps the move-slide and reducing tool.
Chip - ANS-An undesirable piece of metal this is removed from a workpiece. Chips are
fashioned whilst a device cuts or grinds metal.
Chip Auger - ANS-A rotating shaft with a helical blade that removes chips from the machine.
The chips auger's computerized elimination of chips from the point of operation reduces the
threat of damage because operators do not need to remove the chips by means of hand.
Chip Guard - ANS-A plastic guard that covers the factor of operation. A chip protect prevents
flying chips from contacting the operator.
Chuck - ANS-A tool that holds a workpiece in region because it rotates on a lathe or different
gadget. The chuck generally has , 3, or 4 jaws that may be adjusted to healthy numerous
workpieces.
Chuck Key - ANS-A tool used to loosen or tighten a chuck. A chuck key ought to be removed
from the chuck earlier than beginning a system.
Clamps - ANS-A workholding device that grips and holds a workpiece in vicinity. Clamps can
be used when machining with a mill.
, CNC Machines - ANS-pc numerical manage system. A gadget device managed by way of a
pc going for walks packages pushed by way of numerical statistics. Most CNC machines are
enclosed.
Combustible - ANS-Capable of igniting and burning. Combustible drinks require special
storage and labeling.
Computer Numerical Control Machine - ANS-CNC gadget. A device device managed
through a computer walking packages driven by using numerical facts. Most CNC machines
are enclosed.
Concentrate - ANS-The chemical mixture that is diluted with water to create a appropriate
slicing fluid. Concentrate should be checked often to make sure most efficient reducing fluid
overall performance.
Conveyor Belt - ANS-A moveable belt used in enterprise to transport substances over a
distance. For metallic slicing safety functions, conveyor belts assist remove sharp chips from
a system device.
Coolant - ANS-A slicing fluid used to lower the temperature of the tool and the workpiece.
Coolant can contain oil, water, or synthetics.
Cover Plate - ANS-A hinged lid on a refractometer that covers the prism floor. The cowl plate
is transparent to allow light into the tool.
Cutting Fluid - ANS-A liquid used at some stage in slicing operations to lessen warmth and
friction among the slicing device and the workpiece. Cutting fluid might also contain oil or
different flammable drinks and is a potential fireplace risk if disposed of improperly.
Cutting Tool - ANS-A tool with one or more reducing edges designed to engage a workpiece
and get rid of material within the shape of chips. Cutting gear preferably showcase
high-quality hardness, durability, and wear resistance.
Deburring - ANS-Removing sharp projections left on a workpiece after a machining or
grinding operation. Deburring is regularly accomplished by way of hand or via robot the
usage of covered abrasives.
Drill - ANS-A multi-factor slicing device used to make round holes. In drilling, either the
workpiece is held stationary even as the drill rotates to cut a hollow to a certain intensity, or
the drill is held desk bound while the workpiece rotates.
Drill Chuck - ANS-A form of toolholder that holds drill bits in a gadget tool, which include a
lathe, mill, or drill press. A drill chuck has jaws and a collar which might be tighted to grip a
drill bit.
Dry Machining - ANS-The technique of metallic cutting with out the use of fluid for lubrication
or cooling. Dry machining sounds different than machining with using a coolant.
Air Nozzle - ANS-A device used to spray air. Air nozzles can be utilized by an operator to
cast off chips from interior a CNC device.
Bore - ANS-A unmarried-factor slicing device used to increase a preexisting hollow. Boring,
which can be carried out on either a lathe or a mill, allows create a concentric hollow that
meets tight tolerances.
Brix Scale - ANS-A gadget used for measuring the concentration of a substance that has
been combined with water. The Brix scale is used along side a refractometer to decide the
attention of a fluid.
Burr - ANS-A difficult aspect last on fabric, such as steel, after it has been machined. Burrs
have to be removed throughout finishing approaches to improve the capability and look of a
component.
Calibration - ANS-The evaluation and adjustment of a tool with unknown accuracy to a tool
with a recognized, correct popular. Calibration removes any version in the device being
checked.
Carriage - ANS-The section of the lathe that slides from side to side longitudinally alongside
the methods. The carriage helps the move-slide and reducing tool.
Chip - ANS-An undesirable piece of metal this is removed from a workpiece. Chips are
fashioned whilst a device cuts or grinds metal.
Chip Auger - ANS-A rotating shaft with a helical blade that removes chips from the machine.
The chips auger's computerized elimination of chips from the point of operation reduces the
threat of damage because operators do not need to remove the chips by means of hand.
Chip Guard - ANS-A plastic guard that covers the factor of operation. A chip protect prevents
flying chips from contacting the operator.
Chuck - ANS-A tool that holds a workpiece in region because it rotates on a lathe or different
gadget. The chuck generally has , 3, or 4 jaws that may be adjusted to healthy numerous
workpieces.
Chuck Key - ANS-A tool used to loosen or tighten a chuck. A chuck key ought to be removed
from the chuck earlier than beginning a system.
Clamps - ANS-A workholding device that grips and holds a workpiece in vicinity. Clamps can
be used when machining with a mill.
, CNC Machines - ANS-pc numerical manage system. A gadget device managed by way of a
pc going for walks packages pushed by way of numerical statistics. Most CNC machines are
enclosed.
Combustible - ANS-Capable of igniting and burning. Combustible drinks require special
storage and labeling.
Computer Numerical Control Machine - ANS-CNC gadget. A device device managed
through a computer walking packages driven by using numerical facts. Most CNC machines
are enclosed.
Concentrate - ANS-The chemical mixture that is diluted with water to create a appropriate
slicing fluid. Concentrate should be checked often to make sure most efficient reducing fluid
overall performance.
Conveyor Belt - ANS-A moveable belt used in enterprise to transport substances over a
distance. For metallic slicing safety functions, conveyor belts assist remove sharp chips from
a system device.
Coolant - ANS-A slicing fluid used to lower the temperature of the tool and the workpiece.
Coolant can contain oil, water, or synthetics.
Cover Plate - ANS-A hinged lid on a refractometer that covers the prism floor. The cowl plate
is transparent to allow light into the tool.
Cutting Fluid - ANS-A liquid used at some stage in slicing operations to lessen warmth and
friction among the slicing device and the workpiece. Cutting fluid might also contain oil or
different flammable drinks and is a potential fireplace risk if disposed of improperly.
Cutting Tool - ANS-A tool with one or more reducing edges designed to engage a workpiece
and get rid of material within the shape of chips. Cutting gear preferably showcase
high-quality hardness, durability, and wear resistance.
Deburring - ANS-Removing sharp projections left on a workpiece after a machining or
grinding operation. Deburring is regularly accomplished by way of hand or via robot the
usage of covered abrasives.
Drill - ANS-A multi-factor slicing device used to make round holes. In drilling, either the
workpiece is held stationary even as the drill rotates to cut a hollow to a certain intensity, or
the drill is held desk bound while the workpiece rotates.
Drill Chuck - ANS-A form of toolholder that holds drill bits in a gadget tool, which include a
lathe, mill, or drill press. A drill chuck has jaws and a collar which might be tighted to grip a
drill bit.
Dry Machining - ANS-The technique of metallic cutting with out the use of fluid for lubrication
or cooling. Dry machining sounds different than machining with using a coolant.
