1
WatchGuard Questions with Detailed Verified Answers
(100% Correct Answers) /Already Graded A+
Intrusion Protection Server (IPS)
Ans: Uses Signatures to provide real-time protection against network attacks.
Only 50 clients on the trusted network of your firebox can connect to the
internet at the same time. What could cause this?
Ans: The DHCP address pool on the trusted interface has only 50 ip
addresses.
From the Fireware Web UI, you can generate a report that shows yoru
device configuration settings. (True of False)
Ans: True
To use the Web Setup Wizard or Quick Setup Wizard to configure your
Firebox or XTM device, your computer must have an IP address on which
subnet?
Ans: 10.0.1.0/24
APT Blocker
Ans: Uses full-system emulation analysis to identify characteristics and
behavior of zero-day malware.
If you disable the Outgoing policy, which policies must you add to allow
trusted users to connect to commonly used websites?
Ans: HTTP port 80 , HTTPS port 443 , DNS port 53
To enable remote devices to send log messages to Dimension through the
gateway Firebox, what must you verify is included in your gateway Firebox
configuration?
Ans: You must add a policy to the remote device configuration file to allow
traffic to a Dimension.
Approved By:
vPretest - Stuvia US
, 2
Which takes precedence: WebBlocker category match or a WebBlocker
exception?
Ans: WebBlocker category match
Which of these actions adds a host to the temporary or permanent blocked
sites list?
A.Enable theAUTO-block sites that attempt to connectoption in a deny policy.
B.Add the site to theBlocked Sites Exceptionslist.
C.On the Firebox System Manager >Blocked Sitestab, selectAdd.
D.In Policy Manager, selectSetup> Default Threat Protection > Blocked
Sitesand clickAdd.
Ans: A,C,D
What settings must your device configuration file include for Gateway
AntiVirus to protect users on your network?
Ans: Configure a policy to use a proxy action that has AntiVirus settings
configured.
Configure Gateway AntiVirus settings for a proxy action.
You can configure your Firebox to automatically redirect users to the
Authentication Portal page.
(True or False)
Ans: True
Application Control
Ans: Manages use of applications on your network.
How can you include log messages from more than one Firebox in a single
report generated by Dimension?
Approved By:
vPretest - Stuvia US
WatchGuard Questions with Detailed Verified Answers
(100% Correct Answers) /Already Graded A+
Intrusion Protection Server (IPS)
Ans: Uses Signatures to provide real-time protection against network attacks.
Only 50 clients on the trusted network of your firebox can connect to the
internet at the same time. What could cause this?
Ans: The DHCP address pool on the trusted interface has only 50 ip
addresses.
From the Fireware Web UI, you can generate a report that shows yoru
device configuration settings. (True of False)
Ans: True
To use the Web Setup Wizard or Quick Setup Wizard to configure your
Firebox or XTM device, your computer must have an IP address on which
subnet?
Ans: 10.0.1.0/24
APT Blocker
Ans: Uses full-system emulation analysis to identify characteristics and
behavior of zero-day malware.
If you disable the Outgoing policy, which policies must you add to allow
trusted users to connect to commonly used websites?
Ans: HTTP port 80 , HTTPS port 443 , DNS port 53
To enable remote devices to send log messages to Dimension through the
gateway Firebox, what must you verify is included in your gateway Firebox
configuration?
Ans: You must add a policy to the remote device configuration file to allow
traffic to a Dimension.
Approved By:
vPretest - Stuvia US
, 2
Which takes precedence: WebBlocker category match or a WebBlocker
exception?
Ans: WebBlocker category match
Which of these actions adds a host to the temporary or permanent blocked
sites list?
A.Enable theAUTO-block sites that attempt to connectoption in a deny policy.
B.Add the site to theBlocked Sites Exceptionslist.
C.On the Firebox System Manager >Blocked Sitestab, selectAdd.
D.In Policy Manager, selectSetup> Default Threat Protection > Blocked
Sitesand clickAdd.
Ans: A,C,D
What settings must your device configuration file include for Gateway
AntiVirus to protect users on your network?
Ans: Configure a policy to use a proxy action that has AntiVirus settings
configured.
Configure Gateway AntiVirus settings for a proxy action.
You can configure your Firebox to automatically redirect users to the
Authentication Portal page.
(True or False)
Ans: True
Application Control
Ans: Manages use of applications on your network.
How can you include log messages from more than one Firebox in a single
report generated by Dimension?
Approved By:
vPretest - Stuvia US
