Welding final exam |75 Questions
and Answers
Which of the following is the definition of "policy" - -Plan
- Arc radiation can cause what on skin? - -Burns
- Which of the following decible measurements can cause heating damage? -
-95
- Johnny is welding in a confined space. Which of the following gases is likely
to be consumed and could cause Jonny to suffocate if it is completely
depleted? - -Oxygen
- Sophia is designing a new welding shop for the local high school. Where
should the compressed gas and fuel cylinders be stored? - -In a location
designated for cylinders.
- Which of the following should not be used on a cylinder at any time ? - -
Petroleum based lubricant
- Which of the following is not an example of hazardous material? - -Carbon
steel
- Emily is looking for controls on a piece of equipment. Which color is she
looking for? - -Yellow
- What is the color blue used to designate? - -Out of working order
equipment
- To improve visibility and highlight the edges of equipment, which color is
used? - -Ivory
- Gretchen is looking for a cord with three prongs in the welding shop. which
of the following is the voltage of the power cord? - -110
- Electrical equipment should always be properly connected to an electrically
neutral source. what is the source called? - -Grounded
- Which of the following is not part of the fire triangle - -Sand
- Ian must use a flammable gas in his cutting operation. which of the
following would be a suitable choice? - -Acetylene
, - Jamie must use a non-flammable gas for his welding operation. which of
the following would be a suitable choice? - -Argon
- How many classes of fires are there - -4
- In what year was the occupation safety and health act passed - -1970
- EPA is the abbreviation for which of the following federal organizations
responsible for protecting human health and the environment? - -
Environmental protection agency
- How many different types of ventilation are commonly used in the welding
shop? - -3
- Kevin is working with a metal which contains a hazardous material. which
of the following substances in considered a hazardous material? - -Cadmium
- How long is a duty cycle? - -10 minutes
- Small transformer type machines can have how low of a duty cycle? - -20
percent
- Approximately how efficient are stick electrodes? - -60 percent
- Which size electrode is not one of the most commonly used? - -1/4in.
- Which electrode is a deep penetrating electrode? - -6010
- If you are using a piece of 1/8 inch thick base metal, what size electrode
should you use? - -1/8in.
- Which of the following is a basic type of weld? - -Groove
- Which type of joint is the groove weld use on? - -Butt joint
- Which type of weld is generally used for thin metals? - -Spot
- A plug or slot weld is what type of weld, just prepared differently? - -Fillet
- What does the acronym IPM stand for? - -Inches per minute
- Which of the following terms means to work together? - -Synergic
- Which is the mixture composition of a 75/25 shield gas used in gas metal
arc welding? - -75% argon and 25% CO2
and Answers
Which of the following is the definition of "policy" - -Plan
- Arc radiation can cause what on skin? - -Burns
- Which of the following decible measurements can cause heating damage? -
-95
- Johnny is welding in a confined space. Which of the following gases is likely
to be consumed and could cause Jonny to suffocate if it is completely
depleted? - -Oxygen
- Sophia is designing a new welding shop for the local high school. Where
should the compressed gas and fuel cylinders be stored? - -In a location
designated for cylinders.
- Which of the following should not be used on a cylinder at any time ? - -
Petroleum based lubricant
- Which of the following is not an example of hazardous material? - -Carbon
steel
- Emily is looking for controls on a piece of equipment. Which color is she
looking for? - -Yellow
- What is the color blue used to designate? - -Out of working order
equipment
- To improve visibility and highlight the edges of equipment, which color is
used? - -Ivory
- Gretchen is looking for a cord with three prongs in the welding shop. which
of the following is the voltage of the power cord? - -110
- Electrical equipment should always be properly connected to an electrically
neutral source. what is the source called? - -Grounded
- Which of the following is not part of the fire triangle - -Sand
- Ian must use a flammable gas in his cutting operation. which of the
following would be a suitable choice? - -Acetylene
, - Jamie must use a non-flammable gas for his welding operation. which of
the following would be a suitable choice? - -Argon
- How many classes of fires are there - -4
- In what year was the occupation safety and health act passed - -1970
- EPA is the abbreviation for which of the following federal organizations
responsible for protecting human health and the environment? - -
Environmental protection agency
- How many different types of ventilation are commonly used in the welding
shop? - -3
- Kevin is working with a metal which contains a hazardous material. which
of the following substances in considered a hazardous material? - -Cadmium
- How long is a duty cycle? - -10 minutes
- Small transformer type machines can have how low of a duty cycle? - -20
percent
- Approximately how efficient are stick electrodes? - -60 percent
- Which size electrode is not one of the most commonly used? - -1/4in.
- Which electrode is a deep penetrating electrode? - -6010
- If you are using a piece of 1/8 inch thick base metal, what size electrode
should you use? - -1/8in.
- Which of the following is a basic type of weld? - -Groove
- Which type of joint is the groove weld use on? - -Butt joint
- Which type of weld is generally used for thin metals? - -Spot
- A plug or slot weld is what type of weld, just prepared differently? - -Fillet
- What does the acronym IPM stand for? - -Inches per minute
- Which of the following terms means to work together? - -Synergic
- Which is the mixture composition of a 75/25 shield gas used in gas metal
arc welding? - -75% argon and 25% CO2
