EPA SECTION 608
TYPE II ACTUAL
EXAM 1 2025-2026
WITH QUESTIONS
AND CORRECT
VERIFIED ANSWERS
GRADED A+
guarantted 100%
PASS
,A customer has an industrial process
refrigeration system that has 1000lbs of R-
22 that has exceeded the applicable leak
rate threshold. How often is the customer
required to perform a leak inspection?
a. Every month
b. Every 3 months
c. Every 6 months
d. Every 12 months - ANSWER-B
After a leak repair of a supermarket rack
using 3000 lbs. of R-22 and a successful
initial verification test, when must a follow-
up leak verification test be conducted?
a. The same day.
b. The next day.
c. Within 10 days.
d. Within 30 days. - ANSWER-C
After installation of a field piped split
system, the unit should first be pressurized
with?
a. air and leak checked.
,b. R-22 and leak checked.
c. R-410A and leak checked.
d. nitrogen and leak checked. - ANSWER-D
After refrigerant liquid has been recovered
from the appliance, any remaining vapor is;
a. Purged to the atmosphere.
b. Isolated in the appliance.
c. pumped into appliance receiver.
d. removed by the recovery system. -
ANSWER-D
An initial leak verification test failed after
repairing a leak in a rack refrigeration
system for a supermarket using an HCFC
refrigerant. What would be the next step(s)?
a. Immediately retrofit or retire the
appliance.
b. Conduct additional repairs within the 30-
day repair window or mothball the
appliance.
c. Conduct a follow-up verification test.
, d. Report the amount of refrigerant added
to the system to the EPA. - ANSWER-B
An operating unit that has a
receiver/storage tank requires refrigerant
system service. When servicing the unit;
a. the compressor should be valved off.
b. liquid refrigerant should be recovered
last.
c. refrigerant should be pumped down and
isolated in the receiver.
d. a gauge pressure of "0" psi should be
achieved by venting. - ANSWER-C
Before making a major repair, technicians
must evacuate an appliance or component
containing more than 200 pounds of R-
410A to which of the following levels?
a. 0 psig
b. 25 mm HG absolute
c. 10 inches of Hg vacuum
d. 15 inches of Hg vacuum - ANSWER-C
TYPE II ACTUAL
EXAM 1 2025-2026
WITH QUESTIONS
AND CORRECT
VERIFIED ANSWERS
GRADED A+
guarantted 100%
PASS
,A customer has an industrial process
refrigeration system that has 1000lbs of R-
22 that has exceeded the applicable leak
rate threshold. How often is the customer
required to perform a leak inspection?
a. Every month
b. Every 3 months
c. Every 6 months
d. Every 12 months - ANSWER-B
After a leak repair of a supermarket rack
using 3000 lbs. of R-22 and a successful
initial verification test, when must a follow-
up leak verification test be conducted?
a. The same day.
b. The next day.
c. Within 10 days.
d. Within 30 days. - ANSWER-C
After installation of a field piped split
system, the unit should first be pressurized
with?
a. air and leak checked.
,b. R-22 and leak checked.
c. R-410A and leak checked.
d. nitrogen and leak checked. - ANSWER-D
After refrigerant liquid has been recovered
from the appliance, any remaining vapor is;
a. Purged to the atmosphere.
b. Isolated in the appliance.
c. pumped into appliance receiver.
d. removed by the recovery system. -
ANSWER-D
An initial leak verification test failed after
repairing a leak in a rack refrigeration
system for a supermarket using an HCFC
refrigerant. What would be the next step(s)?
a. Immediately retrofit or retire the
appliance.
b. Conduct additional repairs within the 30-
day repair window or mothball the
appliance.
c. Conduct a follow-up verification test.
, d. Report the amount of refrigerant added
to the system to the EPA. - ANSWER-B
An operating unit that has a
receiver/storage tank requires refrigerant
system service. When servicing the unit;
a. the compressor should be valved off.
b. liquid refrigerant should be recovered
last.
c. refrigerant should be pumped down and
isolated in the receiver.
d. a gauge pressure of "0" psi should be
achieved by venting. - ANSWER-C
Before making a major repair, technicians
must evacuate an appliance or component
containing more than 200 pounds of R-
410A to which of the following levels?
a. 0 psig
b. 25 mm HG absolute
c. 10 inches of Hg vacuum
d. 15 inches of Hg vacuum - ANSWER-C
