The best type of strainer to use in a shallow stream is a:
Give this one a try later!
A. Floating strainer (Correct Answer)
B. Traditional strainer
C. Low-level strainer
, D. Stream filter
You may need to perform a confined space turnaround:
Give this one a try later!
A. When entering a parking garage with the fire apparatus
B. For a reverse hose lay in a narrow street or intersection (Correct Answer)
C. When the roadway becomes narrower
D. If the fire apparatus needs to be parked in reverse
Fire pump service tests are conducted at a minimum:
Give this one a try later!
A. Every Day
B. Once a week
C. Once a month
D. Once a year (Correct Answer)
An important consideration when determining the position of a fire apparatus is the:
,Give this one a try later!
A. Manpower available
B. Distance from staging
C. Method of attack (Correct Answer)
D. Location of parking lot
The first thing to do when you arrive at a property with an automatic sprinkler system is
to:
Give this one a try later!
A. Determine if there really is a fire and then supply the fire department
connection
B. Make preparations to supply the FDC by connecting hoselines to the FDC
and hydrant (Correct Answer)
C. Check to see if the control valve is open and if the fixed fire pump is
operating correctly
D. Check the pre-incident plan to determine the required pressure for
charging the system
The purpose of the gauge and flowmeter test is to:
Give this one a try later!
, A. Check the overall condition of the engine
B. Check that the given discharge information is accurate when the pump is in
operation (Correct Answer)
C. Measure whether pressure control devices can maintain certain discharge
pressures under varying conditions
D. Ensure that the fire apparatus is running at the same speed it was rated for
when it was new
During service testing, it is important that the water temperature be between:
Give this one a try later!
A. 50°F and 100°F
B. 35°F and 90°F (Correct Answer)
C. 50°F and 100°F
D. 50°C and 100°C
You figure pressure loss in a single-line hose flowing at 350 GPM to be 45 psi. Then, a
coupling is added and the nozzle is taken to the 6th floor of a burning structure. The
friction loss for this new layout is now:
Give this one a try later!
Give this one a try later!
A. Floating strainer (Correct Answer)
B. Traditional strainer
C. Low-level strainer
, D. Stream filter
You may need to perform a confined space turnaround:
Give this one a try later!
A. When entering a parking garage with the fire apparatus
B. For a reverse hose lay in a narrow street or intersection (Correct Answer)
C. When the roadway becomes narrower
D. If the fire apparatus needs to be parked in reverse
Fire pump service tests are conducted at a minimum:
Give this one a try later!
A. Every Day
B. Once a week
C. Once a month
D. Once a year (Correct Answer)
An important consideration when determining the position of a fire apparatus is the:
,Give this one a try later!
A. Manpower available
B. Distance from staging
C. Method of attack (Correct Answer)
D. Location of parking lot
The first thing to do when you arrive at a property with an automatic sprinkler system is
to:
Give this one a try later!
A. Determine if there really is a fire and then supply the fire department
connection
B. Make preparations to supply the FDC by connecting hoselines to the FDC
and hydrant (Correct Answer)
C. Check to see if the control valve is open and if the fixed fire pump is
operating correctly
D. Check the pre-incident plan to determine the required pressure for
charging the system
The purpose of the gauge and flowmeter test is to:
Give this one a try later!
, A. Check the overall condition of the engine
B. Check that the given discharge information is accurate when the pump is in
operation (Correct Answer)
C. Measure whether pressure control devices can maintain certain discharge
pressures under varying conditions
D. Ensure that the fire apparatus is running at the same speed it was rated for
when it was new
During service testing, it is important that the water temperature be between:
Give this one a try later!
A. 50°F and 100°F
B. 35°F and 90°F (Correct Answer)
C. 50°F and 100°F
D. 50°C and 100°C
You figure pressure loss in a single-line hose flowing at 350 GPM to be 45 psi. Then, a
coupling is added and the nozzle is taken to the 6th floor of a burning structure. The
friction loss for this new layout is now:
Give this one a try later!
