STUDYSAGE
SCTE BPI EXAM step by step
STUDY GUIDE with 100%
updated answers.get a pass
on your first trial!!
Certifying the reliability pf the customers drop system involves - correct
answer✔️✔️Replacing any defective drop components
What is one step in verifying that the digital set-top terminal is operating
normally? - correct answer✔️✔️Calling dispatch or the person designated with
access to the billing system software to have the set-top terminal authorized
When installing the NIU, you would use - correct answer✔️✔️A dial-pulse
telephone test set to check dial tone on inbound and outbound call capability
In twisted pair cable network powering, - correct answer✔️✔️Always wire the
twisted pair power cables first to the NIU power terminals and then to the power
terminal of the power distributing tap
Telephony inside wiring - correct answer✔️✔️Is routed from the NID or
distribution device through the appropriate compression fitting
When testing and verifying NIU operation - correct answer✔️✔C ️ all the
provisioning center from the test phone or butt set to verify the ability to place an
outbound call
SUCCESS
,STUDYSAGE
Items to check in order to certify the reliability of the customer drop system
include - correct answer✔️✔️Installing high pass filters and directional couples, if
needed///monitoring, detecting, and eliminating signal leakage
The customer access are of an NIU - correct answer✔️✔️Provides access to the
broadband cable output port, RJ-11 testjacks, and telephone tip and ring wiring
connectors
Which of the following are tests/measurements than can be made on a VOM? -
correct answer✔️✔️Voltage DC&AC///Opens and shorts
The federal government mandates the amount of _________________ that is
acceptable for cable networks - correct answer✔️✔️egress
Certifying the reliability of the customers drop system requires - correct
answer✔️✔️eliminate signal leakage////check condition and integrity of the drop
system
What is the main purpose for the MAC address on a EMTA? - correct
answer✔️✔️provides that authorization to ensure only the customers account in
the billing system is assigned to that address
The NID - correct answer✔️✔️is the demarcation point between CPE network to
the local telephone companies network
The process of keeping your telephone number from one provider to another is? -
correct answer✔️✔️Porting
SUCCESS
, STUDYSAGE
To ensure proper telephone operation, wiring color codes for both types of cables
for standardized for: - correct answer✔️✔️Tip and ring wiring of NID's
IN twisted pair cable network powering - correct answer✔️✔️is disconnected
from the incumbent telephone provider
In local powering of an EMTA - correct answer✔️✔️optional internal battery is
installed to prevent interruption to service in the event of a power outage
Before connections are made on the back of the EMTA, - correct
answer✔️✔️make sure the cable shield is properly grounded and bonded to NEC
standards
Telephony inside wiring (quad station) is no longer adequate because of - correct
answer✔️✔️(ALL) data over telephone lines//fax machines//digital voice
communication
Quad station wiring is more prone to crosstalk that Cat 5e, due to - correct
answer✔️✔️twisted pairs
The NIU at a customers premises - correct answer✔️✔️Converts RF signals
received via the coaxial cable system to the telephony series required by the
customer
A private switching system, usually located at the customers premises, which
serves a business, or a government agency - correct answer✔️✔️PBX
SUCCESS
SCTE BPI EXAM step by step
STUDY GUIDE with 100%
updated answers.get a pass
on your first trial!!
Certifying the reliability pf the customers drop system involves - correct
answer✔️✔️Replacing any defective drop components
What is one step in verifying that the digital set-top terminal is operating
normally? - correct answer✔️✔️Calling dispatch or the person designated with
access to the billing system software to have the set-top terminal authorized
When installing the NIU, you would use - correct answer✔️✔️A dial-pulse
telephone test set to check dial tone on inbound and outbound call capability
In twisted pair cable network powering, - correct answer✔️✔️Always wire the
twisted pair power cables first to the NIU power terminals and then to the power
terminal of the power distributing tap
Telephony inside wiring - correct answer✔️✔️Is routed from the NID or
distribution device through the appropriate compression fitting
When testing and verifying NIU operation - correct answer✔️✔C ️ all the
provisioning center from the test phone or butt set to verify the ability to place an
outbound call
SUCCESS
,STUDYSAGE
Items to check in order to certify the reliability of the customer drop system
include - correct answer✔️✔️Installing high pass filters and directional couples, if
needed///monitoring, detecting, and eliminating signal leakage
The customer access are of an NIU - correct answer✔️✔️Provides access to the
broadband cable output port, RJ-11 testjacks, and telephone tip and ring wiring
connectors
Which of the following are tests/measurements than can be made on a VOM? -
correct answer✔️✔️Voltage DC&AC///Opens and shorts
The federal government mandates the amount of _________________ that is
acceptable for cable networks - correct answer✔️✔️egress
Certifying the reliability of the customers drop system requires - correct
answer✔️✔️eliminate signal leakage////check condition and integrity of the drop
system
What is the main purpose for the MAC address on a EMTA? - correct
answer✔️✔️provides that authorization to ensure only the customers account in
the billing system is assigned to that address
The NID - correct answer✔️✔️is the demarcation point between CPE network to
the local telephone companies network
The process of keeping your telephone number from one provider to another is? -
correct answer✔️✔️Porting
SUCCESS
, STUDYSAGE
To ensure proper telephone operation, wiring color codes for both types of cables
for standardized for: - correct answer✔️✔️Tip and ring wiring of NID's
IN twisted pair cable network powering - correct answer✔️✔️is disconnected
from the incumbent telephone provider
In local powering of an EMTA - correct answer✔️✔️optional internal battery is
installed to prevent interruption to service in the event of a power outage
Before connections are made on the back of the EMTA, - correct
answer✔️✔️make sure the cable shield is properly grounded and bonded to NEC
standards
Telephony inside wiring (quad station) is no longer adequate because of - correct
answer✔️✔️(ALL) data over telephone lines//fax machines//digital voice
communication
Quad station wiring is more prone to crosstalk that Cat 5e, due to - correct
answer✔️✔️twisted pairs
The NIU at a customers premises - correct answer✔️✔️Converts RF signals
received via the coaxial cable system to the telephony series required by the
customer
A private switching system, usually located at the customers premises, which
serves a business, or a government agency - correct answer✔️✔️PBX
SUCCESS
