INIWIC - Test 3
INIWIC - final exam Test 3
What's the range of the FN303 on an area and point target? 30-50 (Point) and 50-100
(Area)
What's the caliber of the FN303? 0.68
What's the rifling on the FN303? Smooth bore
Does the FN303 fire from the open or closed bolt? Open bolt, this is why you shouldn't put
your fingers in the magazine well
What's the magazine capacity of the FN303? 15 rounds
What are the FN303's types of projectiles? Clear impact, washable paint, permanent paint,
pava powder (0.10% OC), and inert powder
What's the shot capacity of the FN303 on a full bottle? 110 shots average
Depending on the payload selected, the FN303 is capable of what? Marking,
incapacitating, and area denial.
What's the loading process for the FN303? 1. Point the weapon in a safe direction
2. Ensure the ¼ turn air valve is "off"
3. Magazine transport cover faces shooter
4. Magazine's transparent cover faces shooter
5. Projectile feed opening at the 12 o'clock
6. Push magazine firmly into well until it clicks
7. Pulldown 2-3 times to ensure the magazine is seated.
When arming the FN303, turn the 1/4 turn air valve and listen for this noise? Click
When engaging targets with the FN303, the head and neck should always be avoided unless this
has been authorized? Deadly force
What's immediate action for the FN303? Tap the base of the magazine, shake the magazine
from side to side, assess the situation, and re-engage the target. If this fails, swap magazines.
, How do you load the FN303 with a speed loader? 1. Attach the speed loader to the empty
magazine until it snaps into position
2. Unscrew the cover to the transport tube
3. With the transparent cover facing down, screw tube into the speed loader
4. Invert the magazine assembly
5. Turn rotor counterclockwise using rotor finger grooves until all pockets are filled
6. Separate the magazine from the speed loader
What shouldn't be used to clean the FN303? Gun solvents or wire brushes
What cleaning tools are authorized for the FN303? The 12 gauge nylon brush, nylon utility
brush, oil for pneumatic systems, and isopropyl alcohol.
When does the FN303 require lubrication? After 500 shots use 4-6 drops of pneumatic oil
When disassembling the FN303, what should never be removed? Spring housing
What's the authorized refill speed for the FN303's air canister? No more than 200 PSI / 15
BAR per second
Which type of target provides feedback for the FN303? Dojo target
How many magazines are included with the FN303?3
What's the authorized cleaning equipment for the FN303? 12GA nylon bore brush, nylon utility
brush, oil for pneumatic equipment, and isopropyl alcohol.
What are the types of non-lethal munitions? Non-flexible, flexible, single projectile,
multiple projectile, and warning
What's the composition of non-flexible munitions? Composed of rigid and semi-rigid material
What's the only flexible round in the USMC inventory? 12-gauge bean bag
What are the primary characteristics of the 12GA XM1116 drag stabilized extended range
marking round? MSD = 30 meters
Point Target = 30 meters
Area Target = 50 meters
What are the primary characteristics of the 12GA rubber fin-stabilized round? MSD = 10
meters
INIWIC - final exam Test 3
What's the range of the FN303 on an area and point target? 30-50 (Point) and 50-100
(Area)
What's the caliber of the FN303? 0.68
What's the rifling on the FN303? Smooth bore
Does the FN303 fire from the open or closed bolt? Open bolt, this is why you shouldn't put
your fingers in the magazine well
What's the magazine capacity of the FN303? 15 rounds
What are the FN303's types of projectiles? Clear impact, washable paint, permanent paint,
pava powder (0.10% OC), and inert powder
What's the shot capacity of the FN303 on a full bottle? 110 shots average
Depending on the payload selected, the FN303 is capable of what? Marking,
incapacitating, and area denial.
What's the loading process for the FN303? 1. Point the weapon in a safe direction
2. Ensure the ¼ turn air valve is "off"
3. Magazine transport cover faces shooter
4. Magazine's transparent cover faces shooter
5. Projectile feed opening at the 12 o'clock
6. Push magazine firmly into well until it clicks
7. Pulldown 2-3 times to ensure the magazine is seated.
When arming the FN303, turn the 1/4 turn air valve and listen for this noise? Click
When engaging targets with the FN303, the head and neck should always be avoided unless this
has been authorized? Deadly force
What's immediate action for the FN303? Tap the base of the magazine, shake the magazine
from side to side, assess the situation, and re-engage the target. If this fails, swap magazines.
, How do you load the FN303 with a speed loader? 1. Attach the speed loader to the empty
magazine until it snaps into position
2. Unscrew the cover to the transport tube
3. With the transparent cover facing down, screw tube into the speed loader
4. Invert the magazine assembly
5. Turn rotor counterclockwise using rotor finger grooves until all pockets are filled
6. Separate the magazine from the speed loader
What shouldn't be used to clean the FN303? Gun solvents or wire brushes
What cleaning tools are authorized for the FN303? The 12 gauge nylon brush, nylon utility
brush, oil for pneumatic systems, and isopropyl alcohol.
When does the FN303 require lubrication? After 500 shots use 4-6 drops of pneumatic oil
When disassembling the FN303, what should never be removed? Spring housing
What's the authorized refill speed for the FN303's air canister? No more than 200 PSI / 15
BAR per second
Which type of target provides feedback for the FN303? Dojo target
How many magazines are included with the FN303?3
What's the authorized cleaning equipment for the FN303? 12GA nylon bore brush, nylon utility
brush, oil for pneumatic equipment, and isopropyl alcohol.
What are the types of non-lethal munitions? Non-flexible, flexible, single projectile,
multiple projectile, and warning
What's the composition of non-flexible munitions? Composed of rigid and semi-rigid material
What's the only flexible round in the USMC inventory? 12-gauge bean bag
What are the primary characteristics of the 12GA XM1116 drag stabilized extended range
marking round? MSD = 30 meters
Point Target = 30 meters
Area Target = 50 meters
What are the primary characteristics of the 12GA rubber fin-stabilized round? MSD = 10
meters
