IPC J-STD-001G QUESTIONS AND ANSWERS
Conductor Diameter - Answers :the outside diameter of wire,stranded or solid, w/o the
insulation
Wire Diameter - Answers :the outside diameter of wire, stranded or solid, with insulation
if present
Disposition - Answers :The determination of how defects should be treated.
Electrical Clearance - Answers :The minimum spacing between noncommon
uninsulated conductors.
FOD (Foreign Object Debris) - Answers :A substance, debris, particulate matter or
article alien to the assembly or system.
High Voltage - Answers :Varies by design and application.
Manufacturer (Assembler) - Answers :Individual, organization, or company responsible
for the assembly process and verification operations necessary to ensure full
compliance.
Objective Evidence - Answers :Documentation in the form of hard copy, computer data,
video, that demonstrates the requirements in the Standard have been met.
Supplier - Answers :The individual, organization or company which provides the
Manufacturer components and/or materials.
User - Answers :The individual, organization, company, contractually designated
authority, or agency responsible for the procurement or design of electrical/electronic
hardware, and having the authority to define the class of equipment and any variation or
restrictions to the requirements of this Standard.
Wire Overwrap - Answers :occurs when a wire/lead is wrapped more than 360" and
remains in contact with the terminal post.
Wire Overlap - Answers :occurs when a wire/lead is wrapped more than 360° and
crosses over itself, does not remain in contact with the terminal post.
Requirement Flowdown - Answers :Standard is contractually required, the applicable
requirements of this Standard shall [D1D2D3] be imposed on all applicable
subcontracts, assembly drawing(s), documentation and purchase orders.
Conductor Diameter - Answers :the outside diameter of wire,stranded or solid, w/o the
insulation
Wire Diameter - Answers :the outside diameter of wire, stranded or solid, with insulation
if present
Disposition - Answers :The determination of how defects should be treated.
Electrical Clearance - Answers :The minimum spacing between noncommon
uninsulated conductors.
FOD (Foreign Object Debris) - Answers :A substance, debris, particulate matter or
article alien to the assembly or system.
High Voltage - Answers :Varies by design and application.
Manufacturer (Assembler) - Answers :Individual, organization, or company responsible
for the assembly process and verification operations necessary to ensure full
compliance.
Objective Evidence - Answers :Documentation in the form of hard copy, computer data,
video, that demonstrates the requirements in the Standard have been met.
Supplier - Answers :The individual, organization or company which provides the
Manufacturer components and/or materials.
User - Answers :The individual, organization, company, contractually designated
authority, or agency responsible for the procurement or design of electrical/electronic
hardware, and having the authority to define the class of equipment and any variation or
restrictions to the requirements of this Standard.
Wire Overwrap - Answers :occurs when a wire/lead is wrapped more than 360" and
remains in contact with the terminal post.
Wire Overlap - Answers :occurs when a wire/lead is wrapped more than 360° and
crosses over itself, does not remain in contact with the terminal post.
Requirement Flowdown - Answers :Standard is contractually required, the applicable
requirements of this Standard shall [D1D2D3] be imposed on all applicable
subcontracts, assembly drawing(s), documentation and purchase orders.
