Questions and Answers 100% Pass
Ideal bromine level in a pool and spa is: - ✔✔3ppm to 6ppm
Ideal chorine level for a pool is: - ✔✔1ppm to 5ppm
Maximum level of chlorine in a pool is: - ✔✔5ppm
If you see bubbles coming up from a return, the possible cause could be - ✔✔a bad seal
on the hair/lint strainer - it is not properly closed, or air is in the filter, or water level is
too low
The hypochlorinator doesn't work. What could be a possible cause for this?
a) no chlorine in the vat
b) the injection fitting is clogged
c) the tube assembly needs to be changed
d) all of the above - ✔✔d) all of the above
100% Pass Guarantee Katelyn Whitman All Rights Reserved © 2025 1
, You go to the pool in the morning and notice the chlorine is at zero. You hand-feed
chlorine, how long to do you have to wait to allow people to go into the pool.
a) no time
b) 15 minutes
c) 30 minutes
d) One day - ✔✔c) 30 minutes
When doing the pH test and the sample turns yellow, what does it mean? - ✔✔pH is too
low
When doing the pH test and the sample turns purple, what does it mean? - ✔✔pH is too
high
What do you do if a patron complains of a chlorine smell and their eyes are stinging? -
✔✔Raise the chlorine to Breakpoint Level.
If the telephone at the pool doesn't work - ✔✔close the pool
What should you use when handling chemicals? - ✔✔Personal Protective Equipment -
Gloves, Goggles, Apron
What happens if the alkalinity level is too low? - ✔✔pH is difficult to maintain, the
water will cause damage to the pool walls
100% Pass Guarantee Katelyn Whitman All Rights Reserved © 2025 2