Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 2 out of 8 pages
Exam (elaborations)

Residential swimming pool trade knowledge exam Questions and Answers 100% Pass

Document preview thumbnail
Preview 2 out of 8 pages

Residential swimming pool trade knowledge exam Questions and Answers 100% Pass A round spa with a 12' inside diameter is to be installed. The site elevation prior to excavation for the spa is 0.00'. The pool shell is to be excavated to allow for a 6" clearance from the 4" thick spa walls and flat bottom slab. Finished inside depth of the spa is to be 3'. The total depth of excavation for the spa shell is ____________. Select the closest answer. - 3'10" Portable abrasive wheels used for external grinding shall be provided with safety guards unless they are ___________ or less in diameter and securely mounted on the end of a steel mandrel. - 2" Backwashing of a sand filter is required when the influent water and the effluent water reaches ___________according to the POOL SPA OPERATOR HANDBOOK. - 10 to 20 psi 2100% Pass Guarantee Katelyn Whitman All Rights Reserved © 2025 The design collapse pressure of a vacuum service filter tank shall be at leas______times the pressure developed by the water in the tank. - 1.5 What can only happen with a dry mix hose when applying shotcrete? - Static electricity buildup All these materials, except_______ are considered to have acceptable corrosion resistance for general swimming pool and spa/hot tub equipment applications and are not required to have a protective coating. - ferrous alloys containing 58% copper The NATIONAL ELECTRIC CODE requires that the heating elements in electrical pool water heaters shall be subdivided into loads not exceeding ________ amperes. - 48 According to the CONCRETE MASONRY HANDBOOK, ________ greatly improves the pumpability of plaster. - Well-graded aggregate According to PLACING REINFORCING BARS, the recommended minimum cover (or protection) for #6 reinforcing bars in concrete walls, which are in contact with the ground, is_______. - 2" from outside of bar to face of concrete According to RESIDENTIAL INGROUND SWIMMING

Content preview

Residential swimming pool trade
knowledge exam Questions and
Answers 100% Pass


A round spa with a 12' inside diameter is to be installed. The site elevation prior to

excavation for the spa is 0.00'. The pool shell is to be excavated to allow for a 6"

clearance from the 4" thick spa walls and flat bottom slab. Finished inside depth of the

spa is to be 3'. The total depth of excavation for the spa shell is ____________. Select the

closest answer. - ✔✔3'10"


Portable abrasive wheels used for external grinding shall be provided with safety

guards unless they are ___________ or less in diameter and securely mounted on the

end of a steel mandrel. - ✔✔2"


Backwashing of a sand filter is required when the influent water and the effluent water

reaches ___________according to the POOL SPA OPERATOR HANDBOOK. - ✔✔10 to

20 psi




100% Pass Guarantee Katelyn Whitman All Rights Reserved © 2025 1

, The design collapse pressure of a vacuum service filter tank shall be at leas______times

the pressure developed by the water in the tank. - ✔✔1.5


What can only happen with a dry mix hose when applying shotcrete? - ✔✔Static

electricity buildup


All these materials, except_______ are considered to have acceptable corrosion

resistance for general swimming pool and spa/hot tub equipment applications and are

not required to have a protective coating. - ✔✔ferrous alloys containing 58% copper


The NATIONAL ELECTRIC CODE requires that the heating elements in electrical pool

water heaters shall be subdivided into loads not exceeding ________ amperes. - ✔✔48


According to the CONCRETE MASONRY HANDBOOK, ________ greatly improves the

pumpability of plaster. - ✔✔Well-graded aggregate


According to PLACING REINFORCING BARS, the recommended minimum cover (or

protection) for #6 reinforcing bars in concrete walls, which are in contact with the

ground, is_______. - ✔✔2" from outside of bar to face of concrete


According to RESIDENTIAL INGROUND SWIMMING POOLS, the slope of the deep

area floor shall not exceed 1 foot of fall in________feet horizontally. - ✔✔3


When chlorine gas is dissolved in water _________is formed. - ✔✔Hypochlorous acid


The diameter of #5 reinforcing steel is____. - ✔✔5/8"




100% Pass Guarantee Katelyn Whitman All Rights Reserved © 2025 2

Document information

Uploaded on
March 17, 2025
Number of pages
8
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$12.99

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
KatelynWhitman
3.6
(259)
Sold
1242
Followers
485
Items
43377
Last sold
3 days ago




Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions