Nomad Pro test Latest complete Exam
study set with Questions and correct
Answers
true - correct answer-✅ some battery charge may be lost during extended inactivity, leading to
fewer exposures between Handset charging
held so it is parallel to the operator. held so NOMAD PRO is positioned close to the patient. at
the end of the cone. - correct answer-✅ in order to maintain the optimal operator safety zone
the backscatter sheild should be
false - correct answer-✅ if the NOMAD PRO has been dropped, turn it one and if it seen to be
working it is safe to use
false - correct answer-✅ protection disminishes when the shield is not parallel to the operator
avoid this by asking the patient to hold their head parallel
6 seconds for exposure 0.09 second long, 12 sec for 0.2 sec long, and 24 sec for 0.4 sec long -
correct answer-✅ the duty cycle to protect your NOMAD PRO is as follows
false - correct answer-✅ TCC protocol states that any TCC dental hygiene student exposing
radiographs with the NOMAD PRO...
a,b,c,d - correct answer-✅ radiation safety is at the heart of the NOMAD PRO design. the
NOMAD PRO has
recharge battery - correct answer-✅ when there is not enough battery charge left to take an
exposure, the charge indicator bars will fade away and the ... alarm message appears on the
screen and the NOMAD PRO will not allow an exposure to begin
incomplete - correct answer-✅ an alarm indicating a partial exposure (when the trigger was not
depressed through the entire time setting - either on purpose or accidentally) is indicated by a
series of beeps and the....... message on the screen until a button is pressed
true - correct answer-✅ NOMAD PRO's smaller diameter cone, combine with the use of the DC
power and primary sheilding greatly reduce a patient x-ray exposure
true - correct answer-✅ the NOMAD PRO should be routinely cleaned using disinfectant wipes
or some other non-acetone cleaner to maintain cleanliness
true - correct answer-✅ per TCC protocol the backscatter shield is to remain at the end of the
cone and is never to be moved
true - correct answer-✅ the operator protection zone is linked to the positioning of the
backscatter shield
false - correct answer-✅ if left unused NOMAD PRO will remain in the Ready mode until turned
off
study set with Questions and correct
Answers
true - correct answer-✅ some battery charge may be lost during extended inactivity, leading to
fewer exposures between Handset charging
held so it is parallel to the operator. held so NOMAD PRO is positioned close to the patient. at
the end of the cone. - correct answer-✅ in order to maintain the optimal operator safety zone
the backscatter sheild should be
false - correct answer-✅ if the NOMAD PRO has been dropped, turn it one and if it seen to be
working it is safe to use
false - correct answer-✅ protection disminishes when the shield is not parallel to the operator
avoid this by asking the patient to hold their head parallel
6 seconds for exposure 0.09 second long, 12 sec for 0.2 sec long, and 24 sec for 0.4 sec long -
correct answer-✅ the duty cycle to protect your NOMAD PRO is as follows
false - correct answer-✅ TCC protocol states that any TCC dental hygiene student exposing
radiographs with the NOMAD PRO...
a,b,c,d - correct answer-✅ radiation safety is at the heart of the NOMAD PRO design. the
NOMAD PRO has
recharge battery - correct answer-✅ when there is not enough battery charge left to take an
exposure, the charge indicator bars will fade away and the ... alarm message appears on the
screen and the NOMAD PRO will not allow an exposure to begin
incomplete - correct answer-✅ an alarm indicating a partial exposure (when the trigger was not
depressed through the entire time setting - either on purpose or accidentally) is indicated by a
series of beeps and the....... message on the screen until a button is pressed
true - correct answer-✅ NOMAD PRO's smaller diameter cone, combine with the use of the DC
power and primary sheilding greatly reduce a patient x-ray exposure
true - correct answer-✅ the NOMAD PRO should be routinely cleaned using disinfectant wipes
or some other non-acetone cleaner to maintain cleanliness
true - correct answer-✅ per TCC protocol the backscatter shield is to remain at the end of the
cone and is never to be moved
true - correct answer-✅ the operator protection zone is linked to the positioning of the
backscatter shield
false - correct answer-✅ if left unused NOMAD PRO will remain in the Ready mode until turned
off
