3/13/25, 8:14 PM NICET Level III Inspection, Testing, and Maintenance of Water Based Systems Practice Test. / Expert Verified Actual Questions & A…
NICET Level III Inspection, Testing, and
Maintenance of Water Based Systems Practice
Test. / Expert Verified Actual Questions &
Answers for Guaranteed Pass | Newest Update,
Save
Terms in this set (133)
The inspection of a fire C) To keep the pump from over heating and damaging
pump circulation relief component systems D) Water is flowing thru it
valve verifies which two properly
situations? (Choose two).
A). To avoid over
pressurizing the system.
B). To ensure all air is
released from the pump
head.
C). To keep the pump from
over heating and
damaging components.
D). Water is flowing thru it
properly
https://quizlet.com/1017919974/nicet-level-iii-inspection-testing-and-maintenance-of-water-based-systems-practice-test-expert-verified-actual-questio… 1/35
,3/13/25, 8:14 PM NICET Level III Inspection, Testing, and Maintenance of Water Based Systems Practice Test. / Expert Verified Actual Questions & A…
Pressure readings for a A) At the hydraulically most remote nozzle
water spray system shall
be made to ensure that
water flow is not impeded
by partially closed valves
or plugged nozzles? At
what point must this
reading be taken? A). At
the hydraulically most
remote nozzle.
B). At the most remote
nozzle in the system.
C). At the nozzle in the
mid point of the system.
D). At three random
nozzles
NICET III Practice
Questions
On a hydrostatic test of a B)50.
standpipe where the
where the maximum
pressure is in excess of
150psi, which pressure
would the inspector add
to the maximum pressure
to get the hydrostatic test
pressure?
A) 25.
B) 50.
C)100.
D) 150
https://quizlet.com/1017919974/nicet-level-iii-inspection-testing-and-maintenance-of-water-based-systems-practice-test-expert-verified-actual-questio… 2/35
,3/13/25, 8:14 PM NICET Level III Inspection, Testing, and Maintenance of Water Based Systems Practice Test. / Expert Verified Actual Questions & A…
Which three of the A) Check and clean screens and filters. B) Drain water
following operations from low points
should be included when D) Replace plugs or caps on auxiliary drains.
restoring a water mist
system to service
following a test (choose
3).
A) Check and clean
screens and filters. B)
Drain water from low
points.
C). Lubricate valve seats.
D) Replace plugs or caps
on auxiliary drains
At which two locations C) The low point drain for each standpipe.
can a main drain test be D) The main drain test connection
performed on a standpipe
system? (Choose two).
A) The hose valve on the
first floor.
B) The hydraulically most
remote hose valve.
C) The low point drain for
each standpipe.
D) The main drain test
connection
https://quizlet.com/1017919974/nicet-level-iii-inspection-testing-and-maintenance-of-water-based-systems-practice-test-expert-verified-actual-questio… 3/35
, 3/13/25, 8:14 PM NICET Level III Inspection, Testing, and Maintenance of Water Based Systems Practice Test. / Expert Verified Actual Questions & A…
How frequently should the C) Every 5 years
Mercury level gauge on a
tank Be tested in order to
determine if the gauge is
accurate?
A) Annually.
B) Every 3 years.
C) Every 5 years.
D). Every 10 years
How often shall water C) Every 5 years
level indicators in water
tanks be tested for
accuracy?
A) every 2 years.
B) Every 3 years.
C) Every 5 years.
D). Every 7 years
Which 2 pieces of A). Discharge pressure. B). Suction pressure
information are obtained
and recorded in order to
plot test data on a graph
after a pump test?
A). Discharge pressure.
B). Suction pressure
C) type of motor
D) Volts and Amps
https://quizlet.com/1017919974/nicet-level-iii-inspection-testing-and-maintenance-of-water-based-systems-practice-test-expert-verified-actual-questio… 4/35
NICET Level III Inspection, Testing, and
Maintenance of Water Based Systems Practice
Test. / Expert Verified Actual Questions &
Answers for Guaranteed Pass | Newest Update,
Save
Terms in this set (133)
The inspection of a fire C) To keep the pump from over heating and damaging
pump circulation relief component systems D) Water is flowing thru it
valve verifies which two properly
situations? (Choose two).
A). To avoid over
pressurizing the system.
B). To ensure all air is
released from the pump
head.
C). To keep the pump from
over heating and
damaging components.
D). Water is flowing thru it
properly
https://quizlet.com/1017919974/nicet-level-iii-inspection-testing-and-maintenance-of-water-based-systems-practice-test-expert-verified-actual-questio… 1/35
,3/13/25, 8:14 PM NICET Level III Inspection, Testing, and Maintenance of Water Based Systems Practice Test. / Expert Verified Actual Questions & A…
Pressure readings for a A) At the hydraulically most remote nozzle
water spray system shall
be made to ensure that
water flow is not impeded
by partially closed valves
or plugged nozzles? At
what point must this
reading be taken? A). At
the hydraulically most
remote nozzle.
B). At the most remote
nozzle in the system.
C). At the nozzle in the
mid point of the system.
D). At three random
nozzles
NICET III Practice
Questions
On a hydrostatic test of a B)50.
standpipe where the
where the maximum
pressure is in excess of
150psi, which pressure
would the inspector add
to the maximum pressure
to get the hydrostatic test
pressure?
A) 25.
B) 50.
C)100.
D) 150
https://quizlet.com/1017919974/nicet-level-iii-inspection-testing-and-maintenance-of-water-based-systems-practice-test-expert-verified-actual-questio… 2/35
,3/13/25, 8:14 PM NICET Level III Inspection, Testing, and Maintenance of Water Based Systems Practice Test. / Expert Verified Actual Questions & A…
Which three of the A) Check and clean screens and filters. B) Drain water
following operations from low points
should be included when D) Replace plugs or caps on auxiliary drains.
restoring a water mist
system to service
following a test (choose
3).
A) Check and clean
screens and filters. B)
Drain water from low
points.
C). Lubricate valve seats.
D) Replace plugs or caps
on auxiliary drains
At which two locations C) The low point drain for each standpipe.
can a main drain test be D) The main drain test connection
performed on a standpipe
system? (Choose two).
A) The hose valve on the
first floor.
B) The hydraulically most
remote hose valve.
C) The low point drain for
each standpipe.
D) The main drain test
connection
https://quizlet.com/1017919974/nicet-level-iii-inspection-testing-and-maintenance-of-water-based-systems-practice-test-expert-verified-actual-questio… 3/35
, 3/13/25, 8:14 PM NICET Level III Inspection, Testing, and Maintenance of Water Based Systems Practice Test. / Expert Verified Actual Questions & A…
How frequently should the C) Every 5 years
Mercury level gauge on a
tank Be tested in order to
determine if the gauge is
accurate?
A) Annually.
B) Every 3 years.
C) Every 5 years.
D). Every 10 years
How often shall water C) Every 5 years
level indicators in water
tanks be tested for
accuracy?
A) every 2 years.
B) Every 3 years.
C) Every 5 years.
D). Every 7 years
Which 2 pieces of A). Discharge pressure. B). Suction pressure
information are obtained
and recorded in order to
plot test data on a graph
after a pump test?
A). Discharge pressure.
B). Suction pressure
C) type of motor
D) Volts and Amps
https://quizlet.com/1017919974/nicet-level-iii-inspection-testing-and-maintenance-of-water-based-systems-practice-test-expert-verified-actual-questio… 4/35
