ipc j-std-001G Questions With Correct
Answers
Conductor Diameter - Correct Answer- the outside diameter of wire,stranded or solid,
w/o the insulation
Wire Diameter - Correct Answer- the outside diameter of wire, stranded or solid, with
insulation if present
Disposition - Correct Answer- The determination of how defects should be treated.
Electrical Clearance - Correct Answer- The minimum spacing between noncommon
uninsulated conductors.
FOD (Foreign Object Debris) - Correct Answer- A substance, debris, particulate matter
or article alien to the assembly or system.
High Voltage - Correct Answer- Varies by design and application.
Manufacturer (Assembler) - Correct Answer- Individual, organization, or company
responsible for the assembly process and verification operations necessary to ensure
full compliance.
Objective Evidence - Correct Answer- Documentation in the form of hard copy,
computer data, video, that demonstrates the requirements in the Standard have been
met.
Process Control - Correct Answer- A system or method to continually steer an operation
in reducing variation in the processes.
, Proficiency - Correct Answer- The capability to perform tasks in accordance with the
requirements and verification procedures.
Solder Destination Side - Correct Answer- The side of the PCB that the solder flows
toward in a plated through-hole application.
Solder Source Side - Correct Answer- The side of the PCB to which solder is applied.
Supplier - Correct Answer- The individual, organization or company which provides the
Manufacturer components and/or materials.
User - Correct Answer- The individual, organization, company, contractually designated
authority, or agency responsible for the procurement or design of electrical/electronic
hardware, and having the authority to define the class of equipment and any variation or
restrictions to the requirements of this Standard.
Wire Overwrap - Correct Answer- occurs when a wire/lead is wrapped more than 360"
and remains in contact with the terminal post.
Wire Overlap - Correct Answer- occurs when a wire/lead is wrapped more than 360°
and crosses over itself, does not remain in contact with the terminal post.
Requirement Flowdown - Correct Answer- Standard is contractually required, the
applicable requirements of this Standard shall [D1D2D3] be imposed on all applicable
subcontracts, assembly drawing(s), documentation and purchase orders.
Personnel Proficiency - Correct Answer- All instructors, operators, and inspection
personnel shall [D1D2D3) be proficient in the tasks to be performed. Objective evidence
of that proficiency shall [D1D2D3] be maintained and be available for review.
Answers
Conductor Diameter - Correct Answer- the outside diameter of wire,stranded or solid,
w/o the insulation
Wire Diameter - Correct Answer- the outside diameter of wire, stranded or solid, with
insulation if present
Disposition - Correct Answer- The determination of how defects should be treated.
Electrical Clearance - Correct Answer- The minimum spacing between noncommon
uninsulated conductors.
FOD (Foreign Object Debris) - Correct Answer- A substance, debris, particulate matter
or article alien to the assembly or system.
High Voltage - Correct Answer- Varies by design and application.
Manufacturer (Assembler) - Correct Answer- Individual, organization, or company
responsible for the assembly process and verification operations necessary to ensure
full compliance.
Objective Evidence - Correct Answer- Documentation in the form of hard copy,
computer data, video, that demonstrates the requirements in the Standard have been
met.
Process Control - Correct Answer- A system or method to continually steer an operation
in reducing variation in the processes.
, Proficiency - Correct Answer- The capability to perform tasks in accordance with the
requirements and verification procedures.
Solder Destination Side - Correct Answer- The side of the PCB that the solder flows
toward in a plated through-hole application.
Solder Source Side - Correct Answer- The side of the PCB to which solder is applied.
Supplier - Correct Answer- The individual, organization or company which provides the
Manufacturer components and/or materials.
User - Correct Answer- The individual, organization, company, contractually designated
authority, or agency responsible for the procurement or design of electrical/electronic
hardware, and having the authority to define the class of equipment and any variation or
restrictions to the requirements of this Standard.
Wire Overwrap - Correct Answer- occurs when a wire/lead is wrapped more than 360"
and remains in contact with the terminal post.
Wire Overlap - Correct Answer- occurs when a wire/lead is wrapped more than 360°
and crosses over itself, does not remain in contact with the terminal post.
Requirement Flowdown - Correct Answer- Standard is contractually required, the
applicable requirements of this Standard shall [D1D2D3] be imposed on all applicable
subcontracts, assembly drawing(s), documentation and purchase orders.
Personnel Proficiency - Correct Answer- All instructors, operators, and inspection
personnel shall [D1D2D3) be proficient in the tasks to be performed. Objective evidence
of that proficiency shall [D1D2D3] be maintained and be available for review.
