1|Page
SACA CERTIFICATION C101 EXAM | ALL QUESTIONS
AND CORRECT ANSWERS | ALREADY GRADED A+ |
VERIFIED ANSWERS | LATEST VERSION (JUST
RELEASED)
The three Fs of product design are form, fit and __________. - (answers)Function
High product quality, quick delivery, low costs are the primary goals of what
system? - (answers)Lean Manufacturing
Which 5S step involves formatting 5S work instructions so that they look and read
alike? - (answers)Standardize
How does the 5S method aid in the goal of lean manufacturing? -
(answers)Reduces the waste of excess motion, helps improve morale, and enables
other lean methods to be more successful
What is the interface used with CNC machines to load and monitor programs? -
(answers)HMI
The automation of many different manufacturing processes is done through the
use of a small computer called a __________. - (answers)PLC
When a machine stops due to an problem, what would the machine's HMI
typically display? - (answers)An error message.
,2|Page
Smart sensors connected to manufacturing networks creates what level of
Industry? - (answers)Industry 4.0
What standard introduced in the early 1980s established a method to physically
connect machines from different manufacturers enabling them to communicate
to one another? - (answers)Ethernet
Which IIoT application monitors equipment during normal operation to prevent
failures to the equipment? - (answers)Predictive maintenance
Occupational Safety and Health Administration(OSHA) develops __________ for
safety retail and service industries to construction and manufacturing. -
(answers)Standards
The regulation that requires manufacturers to document and report information
on the types of chemicals they use, store, release into the environment, or
dispose of is known as EPCRA. Is this statement TRUE or FALSE? - (answers)True
The use of ___________________marked the advent of the third industrial
revolution? - (answers)Computers
If an operator knows a safety problem exists with a machine, the operator should
__________. - (answers)Notify a supervisor immediately
, 3|Page
A(n) __________ is a device or system that shuts down a machine immediately if
the operator is in danger. - (answers)Emergency stop
If the energy sources are shut down, what would this mean for a pneumatic
valve? - (answers)It is closed
What are the 5 steps of electrical Lockout/tagout - (answers)1. Shut down the
equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment
Which of the following is a common cause of workplace death? - (answers)Falls
The process of identifying potential hazards in the workplace is known as a
__________. - (answers)Hazard assessment
An injury is defined as physical harm to the body that happens as a result of
exposure to some form of energy that exceeds the body's tolerance. Is this
statement TRUE or FALSE? - (answers)TRUE
In the event of an evacuation alarm, employees should __________. -
(answers)Shut down their machines and leave the building
SACA CERTIFICATION C101 EXAM | ALL QUESTIONS
AND CORRECT ANSWERS | ALREADY GRADED A+ |
VERIFIED ANSWERS | LATEST VERSION (JUST
RELEASED)
The three Fs of product design are form, fit and __________. - (answers)Function
High product quality, quick delivery, low costs are the primary goals of what
system? - (answers)Lean Manufacturing
Which 5S step involves formatting 5S work instructions so that they look and read
alike? - (answers)Standardize
How does the 5S method aid in the goal of lean manufacturing? -
(answers)Reduces the waste of excess motion, helps improve morale, and enables
other lean methods to be more successful
What is the interface used with CNC machines to load and monitor programs? -
(answers)HMI
The automation of many different manufacturing processes is done through the
use of a small computer called a __________. - (answers)PLC
When a machine stops due to an problem, what would the machine's HMI
typically display? - (answers)An error message.
,2|Page
Smart sensors connected to manufacturing networks creates what level of
Industry? - (answers)Industry 4.0
What standard introduced in the early 1980s established a method to physically
connect machines from different manufacturers enabling them to communicate
to one another? - (answers)Ethernet
Which IIoT application monitors equipment during normal operation to prevent
failures to the equipment? - (answers)Predictive maintenance
Occupational Safety and Health Administration(OSHA) develops __________ for
safety retail and service industries to construction and manufacturing. -
(answers)Standards
The regulation that requires manufacturers to document and report information
on the types of chemicals they use, store, release into the environment, or
dispose of is known as EPCRA. Is this statement TRUE or FALSE? - (answers)True
The use of ___________________marked the advent of the third industrial
revolution? - (answers)Computers
If an operator knows a safety problem exists with a machine, the operator should
__________. - (answers)Notify a supervisor immediately
, 3|Page
A(n) __________ is a device or system that shuts down a machine immediately if
the operator is in danger. - (answers)Emergency stop
If the energy sources are shut down, what would this mean for a pneumatic
valve? - (answers)It is closed
What are the 5 steps of electrical Lockout/tagout - (answers)1. Shut down the
equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment
Which of the following is a common cause of workplace death? - (answers)Falls
The process of identifying potential hazards in the workplace is known as a
__________. - (answers)Hazard assessment
An injury is defined as physical harm to the body that happens as a result of
exposure to some form of energy that exceeds the body's tolerance. Is this
statement TRUE or FALSE? - (answers)TRUE
In the event of an evacuation alarm, employees should __________. -
(answers)Shut down their machines and leave the building
