MTA Training Test 1 || 100% GUARANTEED PASS!!
Which protocol in IPsec provides both authentication and encryption? correct answers
Encapsulating Security Payload (ESP)
What is the main criteria used by firewalls to filter traffic? correct answers Protocols and
Ports
You need to connect a network adapter to a switch. You need the connection to be able to
send and receive data at the same time. What type of connection should you use? correct
answers Full duplex
Your ISP recently installed a T1 line. What is max throughput of a T1 line? correct answers
1.544 Mbps
You are needing to set up a VPN between two companies that are collaborating on a project.
Which type of VPN will you set up? correct answers Site-to-Site
Which are examples of leased lines? correct answers DSL
Your purchasing department has purchased new 802.11ac wireless routers. You want to make
sure all of your wireless devices are compatible with this new router. Besides 802.11ac,
which wireless standards will work with these wireless routers? correct answers 802.11n
(300Mbps at 2.4 or 5GHz) and 802.11a (54 Mbps at 5GHz)
You need to connect three wireless networks together: an 802.11a, an 802.11g, and an
802.11n. Which wireless tool should you use to accomplish this task? correct answers
Wireless bridge
Connecting several computers together in a circle without the use of a hub or switch is using
what kind of topology? correct answers Ring
In a _________ topology, every single computer is connected to every other computer on the
network. correct answers Mesh
A __________ is a device that sets up different collision domains for each device connected
to it, allowing the networked devices to run in Full Duplex without collisions. correct answers
Switch
Which role needs to be added to Windows Server 2016 in order to enable routing thru the
server? correct answers Remote Access
Which type of network cables can carry signals over the longest distances? correct answers
Single-mode fiber
You need to find the MAC address of the network adapter for the computer you are currently
working on. What command line command will give you the info you need? correct answers
ipconfig /all
Which protocol in IPsec provides both authentication and encryption? correct answers
Encapsulating Security Payload (ESP)
What is the main criteria used by firewalls to filter traffic? correct answers Protocols and
Ports
You need to connect a network adapter to a switch. You need the connection to be able to
send and receive data at the same time. What type of connection should you use? correct
answers Full duplex
Your ISP recently installed a T1 line. What is max throughput of a T1 line? correct answers
1.544 Mbps
You are needing to set up a VPN between two companies that are collaborating on a project.
Which type of VPN will you set up? correct answers Site-to-Site
Which are examples of leased lines? correct answers DSL
Your purchasing department has purchased new 802.11ac wireless routers. You want to make
sure all of your wireless devices are compatible with this new router. Besides 802.11ac,
which wireless standards will work with these wireless routers? correct answers 802.11n
(300Mbps at 2.4 or 5GHz) and 802.11a (54 Mbps at 5GHz)
You need to connect three wireless networks together: an 802.11a, an 802.11g, and an
802.11n. Which wireless tool should you use to accomplish this task? correct answers
Wireless bridge
Connecting several computers together in a circle without the use of a hub or switch is using
what kind of topology? correct answers Ring
In a _________ topology, every single computer is connected to every other computer on the
network. correct answers Mesh
A __________ is a device that sets up different collision domains for each device connected
to it, allowing the networked devices to run in Full Duplex without collisions. correct answers
Switch
Which role needs to be added to Windows Server 2016 in order to enable routing thru the
server? correct answers Remote Access
Which type of network cables can carry signals over the longest distances? correct answers
Single-mode fiber
You need to find the MAC address of the network adapter for the computer you are currently
working on. What command line command will give you the info you need? correct answers
ipconfig /all
