LMRT CORE REVIEW QUESTIONS
2025 |GUARANTEED ACCURATE
ANSWERS |COMPLETE
O/S the glass envelope& inside the rotor - ACCURATE ANSWERS✔✔
Where is the stator of the anode induction motor located?
Autotransformer & the timer circuit - ACCURATE ANSWERS✔✔ The
exposure switch is found between the
Variable resistor - ACCURATE ANSWERS✔✔ The electrical device
used to adjust the mA selection is a/an
Incoming line & the step-down transformer - ACCURATE
ANSWERS✔✔ The timer control is found b/w the
Incoming line & the exposure switch - ACCURATE ANSWERS✔✔
The kVp control is found b/w the
Rotor speed - ACCURATE ANSWERS✔✔ All of the following are
radiographer-operated controls EXCEPT
,Smaller Object Image Distance (OID) - ACCURATE ANSWERS✔✔
The key advantage of a curved-top radiographic table is the
Must not exceed 600 mAs - ACCURATE ANSWERS✔✔ When using
AEC at 80 kVp, b/u times
Fluoroscopic tower - ACCURATE ANSWERS✔✔ All of the following
are XR tube support systems EXCEPT
210V - ACCURATE ANSWERS✔✔ Nearly all the types of XR
equipment operate from an incoming line of
Voltage - ACCURATE ANSWERS✔✔ When full-wave rectification is
applied to 3-phase current, a_ ripple is produced.
6 - ACCURATE ANSWERS✔✔ A 3-phase, rectified current produces a
voltage ripple of_ pulses per Hz.
Handgrips - ACCURATE ANSWERS✔✔ Ancillary equipment for
titling tables includes
Low abrasion surface to lessen patient slippage as they transfer -
ACCURATE ANSWERS✔✔ All of the following are desired features
radiographic tables EXCEPT
, Exposure time - ACCURATE ANSWERS✔✔ Automatic exposure
control (AEC) technology determines
Have a tendency to produce leakage exposure after exposure termination
- ACCURATE ANSWERS✔✔ When compared to battery-powered
portable radiographic units, capacitor discharge mobile units
Thermionic Emission - ACCURATE ANSWERS✔✔ All of the
following are related except one. Select the one that is NOT RELATED.
Copper - ACCURATE ANSWERS✔✔ All of the following are preferred
cathode filament materials EXCEPT
High melting points - ACCURATE ANSWERS✔✔ Filament materials
are chosen primarily for their
A small amperage - ACCURATE ANSWERS✔✔ Driving the
thermionic cloud from the cathode to the anode requires
3-three phase generators are preferred - ACCURATE ANSWERS✔✔ In
order to time the XR exposure w/rapid inspiration on an infant
2025 |GUARANTEED ACCURATE
ANSWERS |COMPLETE
O/S the glass envelope& inside the rotor - ACCURATE ANSWERS✔✔
Where is the stator of the anode induction motor located?
Autotransformer & the timer circuit - ACCURATE ANSWERS✔✔ The
exposure switch is found between the
Variable resistor - ACCURATE ANSWERS✔✔ The electrical device
used to adjust the mA selection is a/an
Incoming line & the step-down transformer - ACCURATE
ANSWERS✔✔ The timer control is found b/w the
Incoming line & the exposure switch - ACCURATE ANSWERS✔✔
The kVp control is found b/w the
Rotor speed - ACCURATE ANSWERS✔✔ All of the following are
radiographer-operated controls EXCEPT
,Smaller Object Image Distance (OID) - ACCURATE ANSWERS✔✔
The key advantage of a curved-top radiographic table is the
Must not exceed 600 mAs - ACCURATE ANSWERS✔✔ When using
AEC at 80 kVp, b/u times
Fluoroscopic tower - ACCURATE ANSWERS✔✔ All of the following
are XR tube support systems EXCEPT
210V - ACCURATE ANSWERS✔✔ Nearly all the types of XR
equipment operate from an incoming line of
Voltage - ACCURATE ANSWERS✔✔ When full-wave rectification is
applied to 3-phase current, a_ ripple is produced.
6 - ACCURATE ANSWERS✔✔ A 3-phase, rectified current produces a
voltage ripple of_ pulses per Hz.
Handgrips - ACCURATE ANSWERS✔✔ Ancillary equipment for
titling tables includes
Low abrasion surface to lessen patient slippage as they transfer -
ACCURATE ANSWERS✔✔ All of the following are desired features
radiographic tables EXCEPT
, Exposure time - ACCURATE ANSWERS✔✔ Automatic exposure
control (AEC) technology determines
Have a tendency to produce leakage exposure after exposure termination
- ACCURATE ANSWERS✔✔ When compared to battery-powered
portable radiographic units, capacitor discharge mobile units
Thermionic Emission - ACCURATE ANSWERS✔✔ All of the
following are related except one. Select the one that is NOT RELATED.
Copper - ACCURATE ANSWERS✔✔ All of the following are preferred
cathode filament materials EXCEPT
High melting points - ACCURATE ANSWERS✔✔ Filament materials
are chosen primarily for their
A small amperage - ACCURATE ANSWERS✔✔ Driving the
thermionic cloud from the cathode to the anode requires
3-three phase generators are preferred - ACCURATE ANSWERS✔✔ In
order to time the XR exposure w/rapid inspiration on an infant
