ASBESTOS CONTRACTOR SUPERVISOR EXAMINATION
EXAM QUESTIONS WITH COMPLETE SOLUTIONS
GUARANTEED PASS
Asbestos is a generic name for a group of minerals that form
__________ - ANSWER - >Fibers
The following are parts of a protective clothing ensemble -
ANSWER - >Hood, booties, coveralls
Which of the following operations would be considered to be
an OSHA Class II job? - ANSWER - >Removal of 5 feet of pipe
insulation in order to fix a leak in the pipe
Make-up air for a negative pressure enclosure usually comes
from - ANSWER - >Holes cut in the polyethylene next to the
machines
All asbestos waste must be - ANSWER - >Sealed, labeled
containers or wraps
Asbestos enters the body via - ANSWER - >Inhalation
Free standing mobile scaffolding that is 16 feet high are
required to have LOCKABLE WHEELS, NOT TO BE LESS THAN 4
FEET WIDE, BE INSPECTED BY A COMPETENT PERSON, and must
have what? - ANSWER - >Guard rails
, A final visual inspection is used to determine which one of the
final steps of an abatement project? - ANSWER - >The removal
of all specified asbestos-containing materials
How much greater is the incidence of lung cancer in asbestos
workers who smoke than in non-asbestos workers who do not
smoke? - ANSWER - >50-90 times
Which of the following records must be kept for a minimum of
30 years? - ANSWER - >Personal air monitoring
AHERA regulations allow PCM to be used as a method of
analysis for: - ANSWER - >Any job where the amount of friable
ACM being removed is less than 260 linear feet or 160 square
feet
When removing asbestos-containing materials, which of the
following is most difficult to control? - ANSWER - >Visible
emissions
What federal agency regulates asbestos in the manufacturing
sector through 29CFR 1910.1001 and in the construction
industry through 29 CFR 1926.1101? - ANSWER - >OSHA
When constructing a negative pressure containment for
abatement, common practice is to place polyethylene sheeting
on the walls and floors consisting of - ANSWER - >2 layers of 4
mil on the walls and 2 layers of 6 mil on the floors
EXAM QUESTIONS WITH COMPLETE SOLUTIONS
GUARANTEED PASS
Asbestos is a generic name for a group of minerals that form
__________ - ANSWER - >Fibers
The following are parts of a protective clothing ensemble -
ANSWER - >Hood, booties, coveralls
Which of the following operations would be considered to be
an OSHA Class II job? - ANSWER - >Removal of 5 feet of pipe
insulation in order to fix a leak in the pipe
Make-up air for a negative pressure enclosure usually comes
from - ANSWER - >Holes cut in the polyethylene next to the
machines
All asbestos waste must be - ANSWER - >Sealed, labeled
containers or wraps
Asbestos enters the body via - ANSWER - >Inhalation
Free standing mobile scaffolding that is 16 feet high are
required to have LOCKABLE WHEELS, NOT TO BE LESS THAN 4
FEET WIDE, BE INSPECTED BY A COMPETENT PERSON, and must
have what? - ANSWER - >Guard rails
, A final visual inspection is used to determine which one of the
final steps of an abatement project? - ANSWER - >The removal
of all specified asbestos-containing materials
How much greater is the incidence of lung cancer in asbestos
workers who smoke than in non-asbestos workers who do not
smoke? - ANSWER - >50-90 times
Which of the following records must be kept for a minimum of
30 years? - ANSWER - >Personal air monitoring
AHERA regulations allow PCM to be used as a method of
analysis for: - ANSWER - >Any job where the amount of friable
ACM being removed is less than 260 linear feet or 160 square
feet
When removing asbestos-containing materials, which of the
following is most difficult to control? - ANSWER - >Visible
emissions
What federal agency regulates asbestos in the manufacturing
sector through 29CFR 1910.1001 and in the construction
industry through 29 CFR 1926.1101? - ANSWER - >OSHA
When constructing a negative pressure containment for
abatement, common practice is to place polyethylene sheeting
on the walls and floors consisting of - ANSWER - >2 layers of 4
mil on the walls and 2 layers of 6 mil on the floors
