Dante Level 1-3 Questions with Complete
Solutions (Latest 2025)
Dante audio streams over WiFi networks [are
_______________________]. - Correct Answers ✅not supported
The bit depth of an audio system dictates - Correct Answers
✅The amplitude resolution of each sample
Does Dante support MIDI - Correct Answers ✅No. Dante
only transports audio data and does not interfere with MIDI.
Is there any advantage to using automatic IP addressing on a
Dante network - Correct Answers ✅Yes. Automatic
addressing ensures that devices create a working LAN.
How are device names used in Dante - Correct Answers
✅Subscriptions are made from name to name
Dante works best with [______________] switches - Correct
Answers ✅gigabit
On a Dante network, latency is - Correct Answers
✅deterministic, set per device
As sample rate is increased on a device, what other property
is usually changed - Correct Answers ✅Channel count is
reduced
,Dante Level 1-3 Questions with Complete
Solutions (Latest 2025)
Where do Dante settings reside? - Correct Answers ✅On
individual Dante devices
In the Dante Controller Routing tab, a green check mark
indicates - Correct Answers ✅Subscription successful
Which of the following are diagnostic features of Dante
Controller? (check all that apply) - Correct Answers ✅1.
Latency monitoring
2. Clock monitoring
How does Dante interact with Energy Efficient Ethernet (EEE)
switches? - Correct Answers ✅EEE switches are not
recommended for use with Dante
When should fiber be used for an Ethernet connection? -
Correct Answers ✅When runs over 100 meters are
required.
The easiest way to get IP addresses for a functional stand-
alone Dante network is for all devices and computers to -
Correct Answers ✅Use the "obtain an IP Address
Automatically" setting
, Dante Level 1-3 Questions with Complete
Solutions (Latest 2025)
If a network is only used for Dante and has only one network
switch, then - Correct Answers ✅The network does not
require a managed switch
Does Dante require special network cabling? - Correct
Answers ✅Regular CAT5E or CAT6 Ethernet cable is
recommended
How are devices added to a Dante network - Correct
Answers ✅Devices are automatically discovered and
displayed in Dante Controller
Dante uses [_________________________] switches. - Correct
Answers ✅standard
How are devices restored to a Dante network after power
cycle - Correct Answers ✅Devices and connections are
automatically restored
What does the Dante Clock Master do - Correct Answers
✅Provides synchronization for all Dante devices on the
network
Does a Dante network require special configuration for
clocking - Correct Answers ✅No. A Clock Master is always
automatically elected by Dante
Solutions (Latest 2025)
Dante audio streams over WiFi networks [are
_______________________]. - Correct Answers ✅not supported
The bit depth of an audio system dictates - Correct Answers
✅The amplitude resolution of each sample
Does Dante support MIDI - Correct Answers ✅No. Dante
only transports audio data and does not interfere with MIDI.
Is there any advantage to using automatic IP addressing on a
Dante network - Correct Answers ✅Yes. Automatic
addressing ensures that devices create a working LAN.
How are device names used in Dante - Correct Answers
✅Subscriptions are made from name to name
Dante works best with [______________] switches - Correct
Answers ✅gigabit
On a Dante network, latency is - Correct Answers
✅deterministic, set per device
As sample rate is increased on a device, what other property
is usually changed - Correct Answers ✅Channel count is
reduced
,Dante Level 1-3 Questions with Complete
Solutions (Latest 2025)
Where do Dante settings reside? - Correct Answers ✅On
individual Dante devices
In the Dante Controller Routing tab, a green check mark
indicates - Correct Answers ✅Subscription successful
Which of the following are diagnostic features of Dante
Controller? (check all that apply) - Correct Answers ✅1.
Latency monitoring
2. Clock monitoring
How does Dante interact with Energy Efficient Ethernet (EEE)
switches? - Correct Answers ✅EEE switches are not
recommended for use with Dante
When should fiber be used for an Ethernet connection? -
Correct Answers ✅When runs over 100 meters are
required.
The easiest way to get IP addresses for a functional stand-
alone Dante network is for all devices and computers to -
Correct Answers ✅Use the "obtain an IP Address
Automatically" setting
, Dante Level 1-3 Questions with Complete
Solutions (Latest 2025)
If a network is only used for Dante and has only one network
switch, then - Correct Answers ✅The network does not
require a managed switch
Does Dante require special network cabling? - Correct
Answers ✅Regular CAT5E or CAT6 Ethernet cable is
recommended
How are devices added to a Dante network - Correct
Answers ✅Devices are automatically discovered and
displayed in Dante Controller
Dante uses [_________________________] switches. - Correct
Answers ✅standard
How are devices restored to a Dante network after power
cycle - Correct Answers ✅Devices and connections are
automatically restored
What does the Dante Clock Master do - Correct Answers
✅Provides synchronization for all Dante devices on the
network
Does a Dante network require special configuration for
clocking - Correct Answers ✅No. A Clock Master is always
automatically elected by Dante
