CSA Standard W47.1-09 - CWB Welding
Supervisor WXE1.1 Study Guide Questions With
Correct Answers 2025 Update
Save
Terms in this set (38)
Does the CSA Standard Yes, This standard provides the requirements for the
W47.1 specify the certification of companies engaged in the fusion
requirements for a welding of steel and the qualification of their
company seeking personnel and welding procedures (Cl 1.1)
certification?
The company (1.2) The requirements of this standard
are based on the principle that a certified company
Who is responsible for
has full responsibility for the quality of the welded
the welded products a
product it produces and this responsibility cannot
company produces?
be transferred to its employed or retained
personnel or to the administrator of this standard.
(Cl. 1.3) This standard governs the certification of
Does this standard
companies. Certification pertains to the capability of
approve the products
the company with respect to welding. Certification
and services of a
should not be construed as approving any products
certified company?
or services of the certified company.
(Cl. 1.4) This standard stipulates requirements for:
What requirements are - welding engineers
stipulated in CSA - welding supervisors
Standard W47.1 - tack welders, welders and welding operators
- documentation
, (Cl. 2.1, 2.2) This standard refers to the following
publications, and where such reference is made, it
shall be to the edition listed below, including all
amendments published there to:
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for
concrete reinforcement
G40.20/G40.21-04(R2009) - General requirements
for rolled or welded structural quality steel/
Structural quality steel
W48-06 - Filler metals and allied materials for metal
arc welding
W59-03(R2008) - Welded steel construction (metal
arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting,
and allied processes
W178.1-08 - Certification of welding inspection
organizations
ASTM International (American Society for Testing
and Materials)
A 370-08a - Standard Test Methods and Definitions
for Mechanical Testing of Steel Products
What standard or code
E 10-07a - Standard Test Method for Brinell
reference publications
Hardness of Metallic Materials.
are referred to in CSA
E23-07ae1 - Standard Test Methods for Notched Bar
Standard W47.1?
Impact Testing of Metallic Materials
AWS (American Welding Society)
A3.0-01
Standard Definitions; Including Terms for Adhesive
Bonding, Brazing, Soldering, Thermal Cutting, and
Thermal Spraying
A5.12/A5.12M-98 (R2007) - Specification for
Tungsten and Tungsten-Alloy Electrodes for Arc
Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel
Electrodes and Rods for Gas Shielded Arc Welding
Supervisor WXE1.1 Study Guide Questions With
Correct Answers 2025 Update
Save
Terms in this set (38)
Does the CSA Standard Yes, This standard provides the requirements for the
W47.1 specify the certification of companies engaged in the fusion
requirements for a welding of steel and the qualification of their
company seeking personnel and welding procedures (Cl 1.1)
certification?
The company (1.2) The requirements of this standard
are based on the principle that a certified company
Who is responsible for
has full responsibility for the quality of the welded
the welded products a
product it produces and this responsibility cannot
company produces?
be transferred to its employed or retained
personnel or to the administrator of this standard.
(Cl. 1.3) This standard governs the certification of
Does this standard
companies. Certification pertains to the capability of
approve the products
the company with respect to welding. Certification
and services of a
should not be construed as approving any products
certified company?
or services of the certified company.
(Cl. 1.4) This standard stipulates requirements for:
What requirements are - welding engineers
stipulated in CSA - welding supervisors
Standard W47.1 - tack welders, welders and welding operators
- documentation
, (Cl. 2.1, 2.2) This standard refers to the following
publications, and where such reference is made, it
shall be to the edition listed below, including all
amendments published there to:
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for
concrete reinforcement
G40.20/G40.21-04(R2009) - General requirements
for rolled or welded structural quality steel/
Structural quality steel
W48-06 - Filler metals and allied materials for metal
arc welding
W59-03(R2008) - Welded steel construction (metal
arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting,
and allied processes
W178.1-08 - Certification of welding inspection
organizations
ASTM International (American Society for Testing
and Materials)
A 370-08a - Standard Test Methods and Definitions
for Mechanical Testing of Steel Products
What standard or code
E 10-07a - Standard Test Method for Brinell
reference publications
Hardness of Metallic Materials.
are referred to in CSA
E23-07ae1 - Standard Test Methods for Notched Bar
Standard W47.1?
Impact Testing of Metallic Materials
AWS (American Welding Society)
A3.0-01
Standard Definitions; Including Terms for Adhesive
Bonding, Brazing, Soldering, Thermal Cutting, and
Thermal Spraying
A5.12/A5.12M-98 (R2007) - Specification for
Tungsten and Tungsten-Alloy Electrodes for Arc
Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel
Electrodes and Rods for Gas Shielded Arc Welding
