OSHA 1926 GC License Exam Questions & Answers Latest Updated
OSHA 1926 GC License Exam Questions &
Answers Latest Updated
Terms in this set (30)
Scaffolds must be ________ 10 ft - OSHA 1926.451 (f)(6)
far from an uninsulated
power line that is 20kv
Safety nets, or fall arrest 6 ft - OSHA 1926.501 (b)(1)
protection, and toe
boards are required for
scaffolding ___ or
greater above working
areas below
How often must Dailey - OSHA 1926.651 (k)(1)
inspections of
excavations, the adjacent
area, and protective
systems be made by a
competent person?
OSHA requires that the 6x6 inches - OSHA 1926.105(d)
mesh size of nets shall
not exceed _____ for
safety nets.
_____ locations are those Class II - OSHA 1926.449
that are hazardous
because of the presence
of combustible dust.
@LOS LIBROS
, OSHA 1926 GC License Exam Questions & Answers Latest Updated
Each employee on a 10 ft - OSHA 1926.451 (g)(1)
scaffold more than ______
above a lower level shall
be protected from falling
to that lower level
A worker falls over a Inspection - OSHA 1926.502 (d)(19)
guardrail system and is
saved by his personal
lifeline. The lifeline may
be used again after _______
The distance between a one-quarter - OSHA 1926.1053 (b)(5)(i)
wall and the base of a
ladder should be
approximately ___ the
working length of the
ladder
Rigging equipment for Prior to use on each shift - OSHA 1926.251 (a)(1)
material handling is
required by OSHA to be
inspected prior use
______ to ensure that it is
safe.
Supporting a scaffold four to one - OSHA 1926.451 (c)(1)
with a height to base
width ratio of more than
____ shall be restrained
from tipping by guying,
tying, or equivalent
means;
What filter lens shade 10-14 - OSHA 1926.102 TABLE E-1
number, for protection
against radiant energy,
must be used with atomic
hydrogen welding>
@LOS LIBROS
OSHA 1926 GC License Exam Questions &
Answers Latest Updated
Terms in this set (30)
Scaffolds must be ________ 10 ft - OSHA 1926.451 (f)(6)
far from an uninsulated
power line that is 20kv
Safety nets, or fall arrest 6 ft - OSHA 1926.501 (b)(1)
protection, and toe
boards are required for
scaffolding ___ or
greater above working
areas below
How often must Dailey - OSHA 1926.651 (k)(1)
inspections of
excavations, the adjacent
area, and protective
systems be made by a
competent person?
OSHA requires that the 6x6 inches - OSHA 1926.105(d)
mesh size of nets shall
not exceed _____ for
safety nets.
_____ locations are those Class II - OSHA 1926.449
that are hazardous
because of the presence
of combustible dust.
@LOS LIBROS
, OSHA 1926 GC License Exam Questions & Answers Latest Updated
Each employee on a 10 ft - OSHA 1926.451 (g)(1)
scaffold more than ______
above a lower level shall
be protected from falling
to that lower level
A worker falls over a Inspection - OSHA 1926.502 (d)(19)
guardrail system and is
saved by his personal
lifeline. The lifeline may
be used again after _______
The distance between a one-quarter - OSHA 1926.1053 (b)(5)(i)
wall and the base of a
ladder should be
approximately ___ the
working length of the
ladder
Rigging equipment for Prior to use on each shift - OSHA 1926.251 (a)(1)
material handling is
required by OSHA to be
inspected prior use
______ to ensure that it is
safe.
Supporting a scaffold four to one - OSHA 1926.451 (c)(1)
with a height to base
width ratio of more than
____ shall be restrained
from tipping by guying,
tying, or equivalent
means;
What filter lens shade 10-14 - OSHA 1926.102 TABLE E-1
number, for protection
against radiant energy,
must be used with atomic
hydrogen welding>
@LOS LIBROS
