ASO OSHA 511 (2015) Questions 100%
Correct Solutions
Three basic means of safeguarding machinery are - ANSWER devices
guards
locations
Point of operation is the point at which (c) - ANSWER cutting
shaping
and boring of forming is accomplished
Nip points and rotary parts are - ANSWER the most common conveyer hazards
Filtering of face piece dust mask respirators are subject - ANSWER to the same
requirements as other are purifying respirators when required to be worn
Eye head and foot PPE - ANSWER must comply with National Consensus Standards ANSI
With few exceptions PPE must be paid for by - ANSWER the employer
When dispensing category 1 or 2 flammable liquids - ANSWER
Electrical interconnections is required
,The lower flammability level of a gas or vapor of a flammable liquid is the lowest
concentration in air - ANSWER expressed as a percentage that can be ignited
The CGA Pamphlet 1 has been incorporated by reference - ANSWER for handling use
and storage of compressed gases
Industrial Hygiene principles (c) - ANSWER are concerned with recognition evaluation
and control of chemical, biological, physical and ergonomic hazards which may cause
sickness or impaired health
Upon initial assessment and when new physical or health hazards are introduced in
the work area - ANSWER employers are required to provide information and training
of hazardous chemicals to employees
The blood borne pathogens standard applies to - ANSWER occupational exposure to
blood or other potentially infectious materials
Engineering controls do not include - ANSWER job rotation
During spray painting and blasting degreasing and other operations the most
common route of entry of hazardous chemicals into the body - ANSWER is inhalation
A skin notation indicates that a chemical can be absorbed - ANSWER through the
skin and substantially add to the total dose
Effective exhaust ventilation draws contaminated air - ANSWER away from workers
breathing zone
,An effective hearing conservation program is required when employee noise exposure
equals or exceeds - ANSWER an 8 hour time weighted average of 85 decibles
Power industrial truck operators must receive truck operators and safety training and
be evaluated - ANSWER in truck operations and have their performance evaluated at
least once every three years
Cranes may be modified and rerated if the supportive structure is checked - ANSWER
by a qualified engineer or the equipment manufacturer for the new rated load
Synthetic swings are required to be removed from service - ANSWER When the sling
has been exposed to acid or costic burns
A confined space includes a space that - ANSWER is not designed for
continuous employee occupancy
Railroad tank car containing 300 gallons of tollene would be considered - ANSWER
a permit required confined space
The safety related practices in subpart S include - ANSWER training requirement
and safe guards for personal protection
Equipment grounding conductor is used to connect the - ANSWER non current carrying
metal part of metal part of equipment raceways and other enclosers to the system
grounding conductor
the grounding electrode conductor or both
, An unqualified person working in an elevated position and conductive objects her or
she may contact my not come closer than - ANSWER 10 feet to unguarded energized
overhead power lines with a voltage to ground of 50,000 volts or below
Lock Out/Tag Out covers servicing and maintaining of - ANSWER machinery and
equipment that could unexpectedly become energized
Power tools are required to be - ANSWER fitted with guards and safety switches
All portable circular saws must be - ANSWER equipped with a constant pressure
on/off switch
The most appropriate solution to the hazard of an oxygen and a settling cylinder
stored with 1 foot of each other (c) - ANSWER is to separate cylinders by a 5 foot rated
at one half hour fire rated wall
Creating Employer (c) - ANSWER an employer who causes a hazardous condition
Multi-employer Citation Policy
(Instruction CPL 2-0.124)
Employer Categories
Creating employer
- The employer that caused a hazardous condition that violates an OSHA standard.
- Employers must not create violative conditions. An employer that does so is citable
even if the only employees exposed are those of other employers at the site.
Exposing Employer (c) - ANSWER an employer whose own employees are exposed
to the hazard
Correct Solutions
Three basic means of safeguarding machinery are - ANSWER devices
guards
locations
Point of operation is the point at which (c) - ANSWER cutting
shaping
and boring of forming is accomplished
Nip points and rotary parts are - ANSWER the most common conveyer hazards
Filtering of face piece dust mask respirators are subject - ANSWER to the same
requirements as other are purifying respirators when required to be worn
Eye head and foot PPE - ANSWER must comply with National Consensus Standards ANSI
With few exceptions PPE must be paid for by - ANSWER the employer
When dispensing category 1 or 2 flammable liquids - ANSWER
Electrical interconnections is required
,The lower flammability level of a gas or vapor of a flammable liquid is the lowest
concentration in air - ANSWER expressed as a percentage that can be ignited
The CGA Pamphlet 1 has been incorporated by reference - ANSWER for handling use
and storage of compressed gases
Industrial Hygiene principles (c) - ANSWER are concerned with recognition evaluation
and control of chemical, biological, physical and ergonomic hazards which may cause
sickness or impaired health
Upon initial assessment and when new physical or health hazards are introduced in
the work area - ANSWER employers are required to provide information and training
of hazardous chemicals to employees
The blood borne pathogens standard applies to - ANSWER occupational exposure to
blood or other potentially infectious materials
Engineering controls do not include - ANSWER job rotation
During spray painting and blasting degreasing and other operations the most
common route of entry of hazardous chemicals into the body - ANSWER is inhalation
A skin notation indicates that a chemical can be absorbed - ANSWER through the
skin and substantially add to the total dose
Effective exhaust ventilation draws contaminated air - ANSWER away from workers
breathing zone
,An effective hearing conservation program is required when employee noise exposure
equals or exceeds - ANSWER an 8 hour time weighted average of 85 decibles
Power industrial truck operators must receive truck operators and safety training and
be evaluated - ANSWER in truck operations and have their performance evaluated at
least once every three years
Cranes may be modified and rerated if the supportive structure is checked - ANSWER
by a qualified engineer or the equipment manufacturer for the new rated load
Synthetic swings are required to be removed from service - ANSWER When the sling
has been exposed to acid or costic burns
A confined space includes a space that - ANSWER is not designed for
continuous employee occupancy
Railroad tank car containing 300 gallons of tollene would be considered - ANSWER
a permit required confined space
The safety related practices in subpart S include - ANSWER training requirement
and safe guards for personal protection
Equipment grounding conductor is used to connect the - ANSWER non current carrying
metal part of metal part of equipment raceways and other enclosers to the system
grounding conductor
the grounding electrode conductor or both
, An unqualified person working in an elevated position and conductive objects her or
she may contact my not come closer than - ANSWER 10 feet to unguarded energized
overhead power lines with a voltage to ground of 50,000 volts or below
Lock Out/Tag Out covers servicing and maintaining of - ANSWER machinery and
equipment that could unexpectedly become energized
Power tools are required to be - ANSWER fitted with guards and safety switches
All portable circular saws must be - ANSWER equipped with a constant pressure
on/off switch
The most appropriate solution to the hazard of an oxygen and a settling cylinder
stored with 1 foot of each other (c) - ANSWER is to separate cylinders by a 5 foot rated
at one half hour fire rated wall
Creating Employer (c) - ANSWER an employer who causes a hazardous condition
Multi-employer Citation Policy
(Instruction CPL 2-0.124)
Employer Categories
Creating employer
- The employer that caused a hazardous condition that violates an OSHA standard.
- Employers must not create violative conditions. An employer that does so is citable
even if the only employees exposed are those of other employers at the site.
Exposing Employer (c) - ANSWER an employer whose own employees are exposed
to the hazard
