CWB 47.1 EXAM QUESTIONS
WITH VERIFIED ANSWERS
The conditions that a corporation seeking certification must meet and follow are
outlined in CSA Standard W47.1.
Is it true or not? ANSWER: True
Can certification be interpreted as endorsing goods manufactured by a certified
business?
Real or not! - ANSWER Untrue
What is meant by "class"?
A) The designations "T", "S", "FW", "ASW", or "WT" for welding personnel.
B) Groups of electrodes
C) a welder qualification category, such as F, H, V, or O welding positions D)
test plate assemblies with fillet and groove welds combined ANSWER C
What is meant by classification?
A) The designations "T", "S", "FW", "ASW", or "WT" for welding personnel.
B) Groups of electrodes
C) a welder qualification category, such as F, H, V, or O welding positions D)
test plate assemblies with fillet and groove welds combined ANSWER A
Which entity is responsible for implementing CSA Standard W47.1?
A) The Canadian Standards Association B) The Canadian Welding Bureau C)
There is no administrator
If a business is not adhering to CSA standard W47.1, the Canadian Welding
Bureau has the authority to revoke its accreditation.
Is it true or not? ANSWER: True
How many certification divisions are listed in CSA Standard W47.1?
ANSWER C: A) one B) two C) three D) four
, Does a division 1 certified business have to hire a full-time welding engineer or
keep a part-time welding engineer on staff?
A) hire a welding engineer on a part-time basis B) hire a welding engineer full-
time C) hire no engineer at all D) hire a welding inspector full-time only
ANSWER B
Does a division 3 certified business have to hire a full-time welding engineer or
keep a part-time welding engineer on staff?
A) Hire a welding engineer on a full-time basis
B) Keep a part-time welding engineer on staff C) Keep a part-time welding
engineer who is solely accountable to the business for welding practices and
procedures D) No welding engineer is needed ANSWER D
Every designated plant, shop, or section must comply with CSA Standard
W47.1's certification criteria for welders, welding procedures specifications,
welding procedure data sheets, welding supervisors, and welding engineers, as
applicable.
Is it true or not? ANSWER: True
To be certified to CSA standard W47.1, a business that specializes in welding-
based erection work needs to have a pony.
Is it true or not? - ANSWER Untrue
When does the business have to notify the Canadian bureau of any changes or
losses to its welding engineering or supervisory staff?
A) right away B) three months C) six months D) no notification is required as
long as the staff is changed a year later ANSWER A
The business will assign a person who will have clear authority and
responsibility for making sure that CSA Standard W47.1's requirements are
followed and upheld, regardless of their respective duties.
Is it true or not? ANSWER: True
What responsibilities does a welding engineer have?
A) As needed, offer the business engineering help.
B) The creation of novel welding techniques
C) Regular evaluations of the business's welding procedures
WITH VERIFIED ANSWERS
The conditions that a corporation seeking certification must meet and follow are
outlined in CSA Standard W47.1.
Is it true or not? ANSWER: True
Can certification be interpreted as endorsing goods manufactured by a certified
business?
Real or not! - ANSWER Untrue
What is meant by "class"?
A) The designations "T", "S", "FW", "ASW", or "WT" for welding personnel.
B) Groups of electrodes
C) a welder qualification category, such as F, H, V, or O welding positions D)
test plate assemblies with fillet and groove welds combined ANSWER C
What is meant by classification?
A) The designations "T", "S", "FW", "ASW", or "WT" for welding personnel.
B) Groups of electrodes
C) a welder qualification category, such as F, H, V, or O welding positions D)
test plate assemblies with fillet and groove welds combined ANSWER A
Which entity is responsible for implementing CSA Standard W47.1?
A) The Canadian Standards Association B) The Canadian Welding Bureau C)
There is no administrator
If a business is not adhering to CSA standard W47.1, the Canadian Welding
Bureau has the authority to revoke its accreditation.
Is it true or not? ANSWER: True
How many certification divisions are listed in CSA Standard W47.1?
ANSWER C: A) one B) two C) three D) four
, Does a division 1 certified business have to hire a full-time welding engineer or
keep a part-time welding engineer on staff?
A) hire a welding engineer on a part-time basis B) hire a welding engineer full-
time C) hire no engineer at all D) hire a welding inspector full-time only
ANSWER B
Does a division 3 certified business have to hire a full-time welding engineer or
keep a part-time welding engineer on staff?
A) Hire a welding engineer on a full-time basis
B) Keep a part-time welding engineer on staff C) Keep a part-time welding
engineer who is solely accountable to the business for welding practices and
procedures D) No welding engineer is needed ANSWER D
Every designated plant, shop, or section must comply with CSA Standard
W47.1's certification criteria for welders, welding procedures specifications,
welding procedure data sheets, welding supervisors, and welding engineers, as
applicable.
Is it true or not? ANSWER: True
To be certified to CSA standard W47.1, a business that specializes in welding-
based erection work needs to have a pony.
Is it true or not? - ANSWER Untrue
When does the business have to notify the Canadian bureau of any changes or
losses to its welding engineering or supervisory staff?
A) right away B) three months C) six months D) no notification is required as
long as the staff is changed a year later ANSWER A
The business will assign a person who will have clear authority and
responsibility for making sure that CSA Standard W47.1's requirements are
followed and upheld, regardless of their respective duties.
Is it true or not? ANSWER: True
What responsibilities does a welding engineer have?
A) As needed, offer the business engineering help.
B) The creation of novel welding techniques
C) Regular evaluations of the business's welding procedures
