ASNT VT Level II
Study online at https://quizlet.com/_889czd
1. B. every 3 years 1. Per ASNT Section XI, NDE personnel shall be recertified:A. every 5 years by
by retraining and re-examination
retesting B. every 3 years by retraining and retesting
C. every 3 years based on continuing satisfactory performance
D. annually by retraining
2. B. his certifica- 2. Per SNT-TC-1A, when an employee leaves his employer:A. his certification
tion is automati- automatically transfers to his new employer
cally terminated B. his certification is automatically terminated
C. he must take an examination to be certified by the new company
D. he may not be certified by the new employer for at least 3 months
3. D. employer 3. Per SNT-TC-1A, certification of NDE personnel is the responsibility of the: A.
ASME
B. manufacturer
C. NRC
D. employer
4. B. discontinuity 4. A variation or interpretation in the normal physical structure or configuration of
a part is called a:A. Flaw
B. discontinuity
C. defect
D. fault
5. D. fatigue cracks 5. Indications caused by repeatd loading, bending or by vibrating stresses are
called:A. mass hardness
B. lamellar testing
C. hot tears
D. fatigue cracks
6. B. soldering 6. A group of joining processes which produces coalescence of materials by
heating them to a suitable tempertaure and by using filler metal having a liquidus
below 450 degree C (840 degree F) and below the solidus of the base metal is
, ASNT VT Level II
Study online at https://quizlet.com/_889czd
called:A. brazing
B. soldering
C. resistance welding
D. arc welding
7. B. stress and cor- 7. SCC is a synergistic action of: A. steel and cracks
rosion B. stress and corrosion
C. structure and coatings
D. slag and craters
8. C lattice 8. Severe grinding cracks appear as:A. wave-like patterns
B. widely
C. lattice
D. deep crevices
9. B. overheating 9. Grinding cracks are caused by:A. too light of pressure during grinding
during grinding B. overheating during grinding
C. grinding too large of an area
D. grinding with very fast motion of the grinder
10. B. brazing if the 10. A process that joins two members together by using capillary action to flow
temperature ex- the filler material is called: A. soldering if the temperature exceeds 840 degrees F
ceeds 840 de- B. brazing if the temperature exceeds 840 degrees F
grees F C. resistance welding
D. oxy-fuel gas welding
11. C. a defect 11. A condition that is of such size, shape, type and location that is detrimental to
the useful service of the part is called: A. a flaw
B. a discontinuity
C. a defect
D. an indication
12.
, ASNT VT Level II
Study online at https://quizlet.com/_889czd
D. heat treat- 12. Mass hardness of a product is caused by improper: A. weld process
ment B. forging
C. casting
D. heat treatment
13. C. double 13. The use of this symbol on a drawing indicates a:A. flare V weld on both sides
V-groove weld B. fillet weld on both sides
C. double V-groove weld
D. V-groove weld on the other side
14. D. casting 14. Unfused chaplets are associated with:A. forging
B. rolling
C. extruding
D. casting
15. B. shortest dis- 15. The actual throat of a weld is the:A. actual distance from the face of the weld
tance from the to the vertical leg.
root of the weld B. shortest distance from the root of the weld to its face
to its face C. distance from the toe to the actual root
D. theoretical throat distance minus the convexity of the weld face.
16. A. a network 16. The term "heat checks" is used to describe:A. a network of cracks caused by
of cracks caused overheating a surface
by overheating a B. a hot tear in a casting
surface C. cracks in a brazed joint
D. cracks caused under heat treatment
17. A. will usually be 17. During a visual examination, an observed crack:A. will usually be cause for
cause for rejec- rejection
tion B. is acceptable if less than 1/16 inch in length
Study online at https://quizlet.com/_889czd
1. B. every 3 years 1. Per ASNT Section XI, NDE personnel shall be recertified:A. every 5 years by
by retraining and re-examination
retesting B. every 3 years by retraining and retesting
C. every 3 years based on continuing satisfactory performance
D. annually by retraining
2. B. his certifica- 2. Per SNT-TC-1A, when an employee leaves his employer:A. his certification
tion is automati- automatically transfers to his new employer
cally terminated B. his certification is automatically terminated
C. he must take an examination to be certified by the new company
D. he may not be certified by the new employer for at least 3 months
3. D. employer 3. Per SNT-TC-1A, certification of NDE personnel is the responsibility of the: A.
ASME
B. manufacturer
C. NRC
D. employer
4. B. discontinuity 4. A variation or interpretation in the normal physical structure or configuration of
a part is called a:A. Flaw
B. discontinuity
C. defect
D. fault
5. D. fatigue cracks 5. Indications caused by repeatd loading, bending or by vibrating stresses are
called:A. mass hardness
B. lamellar testing
C. hot tears
D. fatigue cracks
6. B. soldering 6. A group of joining processes which produces coalescence of materials by
heating them to a suitable tempertaure and by using filler metal having a liquidus
below 450 degree C (840 degree F) and below the solidus of the base metal is
, ASNT VT Level II
Study online at https://quizlet.com/_889czd
called:A. brazing
B. soldering
C. resistance welding
D. arc welding
7. B. stress and cor- 7. SCC is a synergistic action of: A. steel and cracks
rosion B. stress and corrosion
C. structure and coatings
D. slag and craters
8. C lattice 8. Severe grinding cracks appear as:A. wave-like patterns
B. widely
C. lattice
D. deep crevices
9. B. overheating 9. Grinding cracks are caused by:A. too light of pressure during grinding
during grinding B. overheating during grinding
C. grinding too large of an area
D. grinding with very fast motion of the grinder
10. B. brazing if the 10. A process that joins two members together by using capillary action to flow
temperature ex- the filler material is called: A. soldering if the temperature exceeds 840 degrees F
ceeds 840 de- B. brazing if the temperature exceeds 840 degrees F
grees F C. resistance welding
D. oxy-fuel gas welding
11. C. a defect 11. A condition that is of such size, shape, type and location that is detrimental to
the useful service of the part is called: A. a flaw
B. a discontinuity
C. a defect
D. an indication
12.
, ASNT VT Level II
Study online at https://quizlet.com/_889czd
D. heat treat- 12. Mass hardness of a product is caused by improper: A. weld process
ment B. forging
C. casting
D. heat treatment
13. C. double 13. The use of this symbol on a drawing indicates a:A. flare V weld on both sides
V-groove weld B. fillet weld on both sides
C. double V-groove weld
D. V-groove weld on the other side
14. D. casting 14. Unfused chaplets are associated with:A. forging
B. rolling
C. extruding
D. casting
15. B. shortest dis- 15. The actual throat of a weld is the:A. actual distance from the face of the weld
tance from the to the vertical leg.
root of the weld B. shortest distance from the root of the weld to its face
to its face C. distance from the toe to the actual root
D. theoretical throat distance minus the convexity of the weld face.
16. A. a network 16. The term "heat checks" is used to describe:A. a network of cracks caused by
of cracks caused overheating a surface
by overheating a B. a hot tear in a casting
surface C. cracks in a brazed joint
D. cracks caused under heat treatment
17. A. will usually be 17. During a visual examination, an observed crack:A. will usually be cause for
cause for rejec- rejection
tion B. is acceptable if less than 1/16 inch in length
