NX Basic Design questions with verified answers
A Technical Data Package is a collection of one or more files or documents that
contains all the information necessary to define a product and its requirements.
(T or F) Ans✓✓✓-True
After using the Show Dimensions command on a sketch how do you erase the
temporarily-displayed dimensions from the graphics window? Ans✓✓✓-Use the
Refresh command
After you mirror an assembly using the Mirror Assembly command, how can you
tell which parts contain an associate geometry link? Ans✓✓✓-Look in the Part
Navigator
All family members of the Template part are _______. Ans✓✓✓-Read only
As you create PMI in your model, you notice the PMI display size does not change
when you zoom in and out. What PMI setting controls this behavior? Ans✓✓✓-
The Enable Resize and Settings Relative to View Zoom Factor PMI preferences
By default, all components you add to the assembly have how many degrees of
freedom? Ans✓✓✓-6
By default, what happens to the child features when their parent feature is
deleted? Ans✓✓✓-The child features are automatically deleted
Changes to the PMI section view must be made in what application? Ans✓✓✓-
Modeling
,Datum targets can be: (Select all that apply) Ans✓✓✓-Points, Lines, and Areas
Design in context of an assembly means that the assembly is the displayed part
and the component you are editing is what? Ans✓✓✓-The Work Part
Direct Modeling uses these methods: Ans✓✓✓-X-Form, Match Edge, and Sew
Export Control markings store instructions inside a part file, so: Ans✓✓✓-Anyone
who opens the part file can see the information
From which one of these can you not reference parameters when creating inter-
part expressions? Ans✓✓✓-Any parts that are not loaded in the session
How can you create a note with a leader? Ans✓✓✓-Click and drag while placing
the note
How can you investigate the design intent of a sketch? Ans✓✓✓-Vary a
dimension to see how the sketch changes
How can you tell if a part contains inter-part expressions? Ans✓✓✓-Look in the
Expressions section under Tools
How can you tell which reference set is displayed? Ans✓✓✓-Look for the
reference set name in the Assembly Navigator
, How can you temporarily remove all the Sketches and Datums from the graphics
window display if all the geometry is on the same layer? Ans✓✓✓-Use the Show
and Hide command
How do you create a projected view on your drawing? Ans✓✓✓-Right-click a
view border and choose Add Projected View
How do you create an assembly using the Bottom-Up method? Ans✓✓✓-Create
the parts separately and then add them to the assembly
How do you reposition a drawing view? Ans✓✓✓-In the drawing area, click and
drag the view border to the desired location
How is the Create Clone Assembly command different from Save As? Ans✓✓✓-
Create Clone Assembly copies all the parts in the assembly
If a balloon in an annotation stack is hidden, the coordinate note in the stack:
Ans✓✓✓-Will also be hidden
If you are unable to select geometry from other parts in your assembly, where
should you look for selection options? Ans✓✓✓-Selection Scope in Top Border
bar
If you don't see the commands you want to use what is one way to display them?
Ans✓✓✓-Change your role
A Technical Data Package is a collection of one or more files or documents that
contains all the information necessary to define a product and its requirements.
(T or F) Ans✓✓✓-True
After using the Show Dimensions command on a sketch how do you erase the
temporarily-displayed dimensions from the graphics window? Ans✓✓✓-Use the
Refresh command
After you mirror an assembly using the Mirror Assembly command, how can you
tell which parts contain an associate geometry link? Ans✓✓✓-Look in the Part
Navigator
All family members of the Template part are _______. Ans✓✓✓-Read only
As you create PMI in your model, you notice the PMI display size does not change
when you zoom in and out. What PMI setting controls this behavior? Ans✓✓✓-
The Enable Resize and Settings Relative to View Zoom Factor PMI preferences
By default, all components you add to the assembly have how many degrees of
freedom? Ans✓✓✓-6
By default, what happens to the child features when their parent feature is
deleted? Ans✓✓✓-The child features are automatically deleted
Changes to the PMI section view must be made in what application? Ans✓✓✓-
Modeling
,Datum targets can be: (Select all that apply) Ans✓✓✓-Points, Lines, and Areas
Design in context of an assembly means that the assembly is the displayed part
and the component you are editing is what? Ans✓✓✓-The Work Part
Direct Modeling uses these methods: Ans✓✓✓-X-Form, Match Edge, and Sew
Export Control markings store instructions inside a part file, so: Ans✓✓✓-Anyone
who opens the part file can see the information
From which one of these can you not reference parameters when creating inter-
part expressions? Ans✓✓✓-Any parts that are not loaded in the session
How can you create a note with a leader? Ans✓✓✓-Click and drag while placing
the note
How can you investigate the design intent of a sketch? Ans✓✓✓-Vary a
dimension to see how the sketch changes
How can you tell if a part contains inter-part expressions? Ans✓✓✓-Look in the
Expressions section under Tools
How can you tell which reference set is displayed? Ans✓✓✓-Look for the
reference set name in the Assembly Navigator
, How can you temporarily remove all the Sketches and Datums from the graphics
window display if all the geometry is on the same layer? Ans✓✓✓-Use the Show
and Hide command
How do you create a projected view on your drawing? Ans✓✓✓-Right-click a
view border and choose Add Projected View
How do you create an assembly using the Bottom-Up method? Ans✓✓✓-Create
the parts separately and then add them to the assembly
How do you reposition a drawing view? Ans✓✓✓-In the drawing area, click and
drag the view border to the desired location
How is the Create Clone Assembly command different from Save As? Ans✓✓✓-
Create Clone Assembly copies all the parts in the assembly
If a balloon in an annotation stack is hidden, the coordinate note in the stack:
Ans✓✓✓-Will also be hidden
If you are unable to select geometry from other parts in your assembly, where
should you look for selection options? Ans✓✓✓-Selection Scope in Top Border
bar
If you don't see the commands you want to use what is one way to display them?
Ans✓✓✓-Change your role
