Lead Inspector 3rd Party
1. Identify the certified personnel who may conduct lead inspections, write inspection reports
and conduct clearance following a lead hazard reduction activity. - ANS-Insp /RA
3 Factors for Radiation Exposure - ANS-Time, distance, shielding
Abatement - ANS-Any set of measures designed to permanently (at least 20 years) eliminate
lead-based paint or lead-based paint hazards. Abatement includes:
1. The removal of lead-based paint and dust-lead hazards, the permanent enclosure or
encapsulation of lead-based paint, the replacement of components or fixtures painted with
lead-based paint, and the removal or permanent covering of soil-lead hazards
2. All preparation, cleanup, disposal, and post abatement clearance testing activities
associated with such measures
ACTION LEVEL (AL) - ANS-0.03 mg / m3 (30 ug / m3) as TWA(8)
ALARA - ANS-As Low As Reasonably Achievable
Applicable Surfaces - ANS-Applicable surfaces include deteriorated, impact, friction,
chewable surfaces, and surfaces to be disturbed.
Clearance Examination - ANS-An activity conducted following lead-based paint hazard
reduction activities to determine that the hazard reduction activities are complete and that no
soil-lead hazards or settled dust-lead hazards, as defined in this part, exist in the dwelling
unit or worksite. The clearance process includes a visual assessment and collection and
analysis of environmental (dust) samples.
Define general contract terms and requirements - ANS-Unit cost / Payment schedule /
Scheduel /deliverables - AIA Forms
Define types of insurance relevant to LBP Inspection / Risk Assessment - ANS-Errors &
omissions - Occurrence
Describe field staff requirements for an inspection/risk assessment. - ANS-Certified
personnel / Mfg Trained for xrf / OSHA Rad Haz Aware
Describe types of liability issues as they relate to risk assessment - ANS-Regulatory / /
contractual / Tort / Vicarious
Describe when a risk assessment is not needed - ANS-a. If the dwelling unit was built after
1978
b. if all LBP has been removed and clearance has been established).
Discuss background information about lead - ANS-Batteries -
electric / vibration / sound / radiation insulators(x-ray operations -
Pigment & Dry agent in Paint / varnish / shellac / grouts
Ink - Ben franklin
Ammo / Fishing weights
Tetra ethyl Lead - gasoline
Solder flux Fittings
Counter weights / Plugs
Discuss basic terms and concepts relevant to lead risk assessments - ANS-Testing
combinations - Room Equ - component - substrate - color
Condition - Building / Paint
Single (all) vs Multi housing - # of units - Date -Test Comb - 40shots MFDF
1. Identify the certified personnel who may conduct lead inspections, write inspection reports
and conduct clearance following a lead hazard reduction activity. - ANS-Insp /RA
3 Factors for Radiation Exposure - ANS-Time, distance, shielding
Abatement - ANS-Any set of measures designed to permanently (at least 20 years) eliminate
lead-based paint or lead-based paint hazards. Abatement includes:
1. The removal of lead-based paint and dust-lead hazards, the permanent enclosure or
encapsulation of lead-based paint, the replacement of components or fixtures painted with
lead-based paint, and the removal or permanent covering of soil-lead hazards
2. All preparation, cleanup, disposal, and post abatement clearance testing activities
associated with such measures
ACTION LEVEL (AL) - ANS-0.03 mg / m3 (30 ug / m3) as TWA(8)
ALARA - ANS-As Low As Reasonably Achievable
Applicable Surfaces - ANS-Applicable surfaces include deteriorated, impact, friction,
chewable surfaces, and surfaces to be disturbed.
Clearance Examination - ANS-An activity conducted following lead-based paint hazard
reduction activities to determine that the hazard reduction activities are complete and that no
soil-lead hazards or settled dust-lead hazards, as defined in this part, exist in the dwelling
unit or worksite. The clearance process includes a visual assessment and collection and
analysis of environmental (dust) samples.
Define general contract terms and requirements - ANS-Unit cost / Payment schedule /
Scheduel /deliverables - AIA Forms
Define types of insurance relevant to LBP Inspection / Risk Assessment - ANS-Errors &
omissions - Occurrence
Describe field staff requirements for an inspection/risk assessment. - ANS-Certified
personnel / Mfg Trained for xrf / OSHA Rad Haz Aware
Describe types of liability issues as they relate to risk assessment - ANS-Regulatory / /
contractual / Tort / Vicarious
Describe when a risk assessment is not needed - ANS-a. If the dwelling unit was built after
1978
b. if all LBP has been removed and clearance has been established).
Discuss background information about lead - ANS-Batteries -
electric / vibration / sound / radiation insulators(x-ray operations -
Pigment & Dry agent in Paint / varnish / shellac / grouts
Ink - Ben franklin
Ammo / Fishing weights
Tetra ethyl Lead - gasoline
Solder flux Fittings
Counter weights / Plugs
Discuss basic terms and concepts relevant to lead risk assessments - ANS-Testing
combinations - Room Equ - component - substrate - color
Condition - Building / Paint
Single (all) vs Multi housing - # of units - Date -Test Comb - 40shots MFDF
