C9 DRYWALL UPDATE QUESTIONS &
ANSWERS SOLVED 100% CORRECT!!
1 of 50
Term
If you texture before the joint compound is dry it will cause:
Give this one a try later!
joint darkening 150 Grit
joint will crack paper tape
, Don't know?
2 of 50
Definition
in the middle, they must not align with the edge of the opening such
as a door or window, unless a control joint is installed at that location
Give this one a try later!
Where should you put the Where is the best place to put
joints above a door? butted ends?
What should you do before moving Where are you most likely to use
a gas cylinder? mesh tape?
Don't know?
3 of 50
Term
Where should you keep brooms on a jobsite?
Give this one a try later!
in the middle, they must not align
with the edge of the opening such
at the side of the wall as a door or window, unless a
, control joint is installed at that
location
in areas of high moisture in a safe place to get to
Don't know?
4 of 50
Definition
4' = 1". every 1/4 inch represents 1 foot. 4 quarters represent 4 feet.
Give this one a try later!
What should be used for wet
A 1/4" scale refers to: sanding?
What is true regarding a power
What is a hawk used for? actuated tool?
Don't know?
5 of 50
Definition
silica sand
, Give this one a try later!
What is the primary advantage of What is the minimum weight limit for
using a laminated wall system? a lanyard?
Which of the following types
of sand is mixed with When installing interior wallboard,
texture compound? what nail procedure is most critical?
Don't know?
6 of 50
Term
Where are you most likely to use mesh tape?
Give this one a try later!
at the side of the wall Perpendicular to the joist
in areas of high moisture after sanding is complete
Don't know?
ANSWERS SOLVED 100% CORRECT!!
1 of 50
Term
If you texture before the joint compound is dry it will cause:
Give this one a try later!
joint darkening 150 Grit
joint will crack paper tape
, Don't know?
2 of 50
Definition
in the middle, they must not align with the edge of the opening such
as a door or window, unless a control joint is installed at that location
Give this one a try later!
Where should you put the Where is the best place to put
joints above a door? butted ends?
What should you do before moving Where are you most likely to use
a gas cylinder? mesh tape?
Don't know?
3 of 50
Term
Where should you keep brooms on a jobsite?
Give this one a try later!
in the middle, they must not align
with the edge of the opening such
at the side of the wall as a door or window, unless a
, control joint is installed at that
location
in areas of high moisture in a safe place to get to
Don't know?
4 of 50
Definition
4' = 1". every 1/4 inch represents 1 foot. 4 quarters represent 4 feet.
Give this one a try later!
What should be used for wet
A 1/4" scale refers to: sanding?
What is true regarding a power
What is a hawk used for? actuated tool?
Don't know?
5 of 50
Definition
silica sand
, Give this one a try later!
What is the primary advantage of What is the minimum weight limit for
using a laminated wall system? a lanyard?
Which of the following types
of sand is mixed with When installing interior wallboard,
texture compound? what nail procedure is most critical?
Don't know?
6 of 50
Term
Where are you most likely to use mesh tape?
Give this one a try later!
at the side of the wall Perpendicular to the joist
in areas of high moisture after sanding is complete
Don't know?
