TCM 226 Final Exam Questions with
Correct Answers
Project Administration software should NOT include the following features: - Answer-Annoymous
Commenting
When handling job site materials, a good rule of thumb is always to move material with the least
expensive labor possible - Answer-True
"All project related functions between parties to a contract" is the definition of: - Answer-Project
Administration
Verifying conformance to specifications, attesting to quantity of work-in-place, reviewing change orders,
and serving as communication link to owner are all duties of construction contract administration -
Answer-True
A pre-construction conference to establish ground rules for the operations and the successful
completion of the project should be held: - Answer-After agreement but before notice to proceed
A common method to transport large equipment from one location to another is to use a lowboy -
Answer-True
, When writing a scope of work for subcontractor, the term "furnish" refers to the requirement that
person will provide and install a particular item of work - Answer-False
Stamped permit documents need to be available on the project site for review by inspectors - Answer-
True
Which of the following parties to the construction site process is typically responsible for scheduling and
paying for necessary inspections? - Answer-Contractor
The process of awarding subcontracts & procuring materials being furnished by the GC is called: -
Answer-Buyout
The Owner and/or the A/E may request to inspect materials delivered off-site - Answer-True
Assume that you are the superintendent for a 4,500 square foot custom home being built in Springfield.
The site plan and building footprint are shown in the figure below. Which of the following will be a
major concern when developing the job-site layout plan. - Answer-Large material deliveries
After the RFI response is received, the general contractor and its subcontractors should review the
change to see if there is a change in scope of work and possible cost of schedule impacts - Answer-True
Only the A/E, not the owner, has the authority to accept non-conforming work - Answer-False
A letter of transmittal is: - Answer-a dated record of when a document was sent to another party
Temporary facilities that need to be considered when planning a job-site layout include: - Answer-job-
site office, job-site storage, porta-potties
All submittals MUST be approved by the project A/E - Answer-False
Correct Answers
Project Administration software should NOT include the following features: - Answer-Annoymous
Commenting
When handling job site materials, a good rule of thumb is always to move material with the least
expensive labor possible - Answer-True
"All project related functions between parties to a contract" is the definition of: - Answer-Project
Administration
Verifying conformance to specifications, attesting to quantity of work-in-place, reviewing change orders,
and serving as communication link to owner are all duties of construction contract administration -
Answer-True
A pre-construction conference to establish ground rules for the operations and the successful
completion of the project should be held: - Answer-After agreement but before notice to proceed
A common method to transport large equipment from one location to another is to use a lowboy -
Answer-True
, When writing a scope of work for subcontractor, the term "furnish" refers to the requirement that
person will provide and install a particular item of work - Answer-False
Stamped permit documents need to be available on the project site for review by inspectors - Answer-
True
Which of the following parties to the construction site process is typically responsible for scheduling and
paying for necessary inspections? - Answer-Contractor
The process of awarding subcontracts & procuring materials being furnished by the GC is called: -
Answer-Buyout
The Owner and/or the A/E may request to inspect materials delivered off-site - Answer-True
Assume that you are the superintendent for a 4,500 square foot custom home being built in Springfield.
The site plan and building footprint are shown in the figure below. Which of the following will be a
major concern when developing the job-site layout plan. - Answer-Large material deliveries
After the RFI response is received, the general contractor and its subcontractors should review the
change to see if there is a change in scope of work and possible cost of schedule impacts - Answer-True
Only the A/E, not the owner, has the authority to accept non-conforming work - Answer-False
A letter of transmittal is: - Answer-a dated record of when a document was sent to another party
Temporary facilities that need to be considered when planning a job-site layout include: - Answer-job-
site office, job-site storage, porta-potties
All submittals MUST be approved by the project A/E - Answer-False
