With Solutions
When making corrections to a field book entry, you should: strike through, initial and
enter correct data and date
What should be started on the first lined page (page 1) of a field book? INDEX
An entire page of a field notebook you are using is incorrect, what do you do to correct the
situation? Mark the page VOID and reference it to a new page showing the correct
information.
"Check Levels" must be run at the start of a construction project to assure that:
Construction will be done to design elevations & final measurements for payment will be
from the same base elevations as the original survey.
What should accompany final measurements so that nonstandard measurements may be
interpreted accurately? Sketches
In the REMARKS column of most computation book forms a reference should be made to the:
Source Documents
When is it permissible to record only the net weight on an asphaltic concrete tabulation form?
Never, gross tare must be included also
, A limerock base course is constructed in two 13-foot widths between station 19+40.20 and
station 84+50.00. What is the area of the base course to the whole square yard? 18,806 SY
How many square yards are in one acre? 4,840
Determine the area of the section (G) in the circle to the tenth of a square foot. (NOTE: A= pi
r(squared) x (angle/360degrees) 887.3 SF
If you have a benchmark at an elevation of 80.25' and a back sight rob reading of 5.45', what is
the height of instrument (HI)? 85.70'
If you have a pile cut off elevation of 50.00' and tip elevation of 10.00', what would your pile
length be? 40'
Where can you find the typical widths of base and surface courses? Typical Sections
sheets of the plans
Thirteen and one-half gallons is equal to how many cubic feet? 1.8 Cubic Feet
Using the data given below, find the volume to the nearest cubic yard. The areas were
determined for the cross sections at these stations: