WatchGuard Secure Wi-Fi Essentials
with WatchGuard Cloud
Which of these wireless modes are supported on the 5 GHz radio band? (Select two.)
a. 802.11a and 802.11n
b. 802.11b and 802.11g
c. 802.11x
d. 802.11ac - answerad
What action must you perform before you can manage an AP with a Firebox? (Select
one.)
a. Configure the AP radios for the 2.4 and 5 GHz bands
b. Create an SSID to broadcast
c. Pair the AP with the Gateway Wireless Controller
d. Reset the AP to factory-default settings - answerc
It is a best practice to place APs near walls, corners, and metal objects to boost the
signal distance.
a. True
b. False - answerb
Which tool can you use on the Gateway Wireless Controller to check for channel
conflicts on your wireless network? (Select one.)
a. Access points tab on the Dashboard
b. Auto-deployment configuration
c. Rogue AP detection
d. Wireless maps - answerd
In Wi-Fi Cloud Manage, which of these Monitoring pages shows WIPS classifications for
clients? (Select one.)
a. Monitoring > Managed Devices
b. Monitoring > Security > Clients
c. Monitoring > Wi-Fi > Clients
d. Monitoring > Applications - answerb
In Wi-Fi Cloud, where do you set the security mode and encryption type for a wireless
network? (Select one.)
a. Device template
b. Authorized WLAN Policy
c. Security profile d. SSID profile - answerd
,In Wi-Fi Cloud, Device Templates applied to a location are inherited by location sub-
folders.
a. True
b. False - answerb
Which of these AP WIPS classifications refers to an device outside your network?
(Select one.)
a. External
b. Authorized
c. Rogue
d. Uncategorized - answera
Which Wi-Fi Cloud application do you use to create captive portal splash pages?
(Select one.)
a. Discover
b. Engage
c. Go
d. Manage
e. Analyze - answerb
In Wi-Fi Cloud, what is the third-radio used for on tri-radio APs? (Select one.)
a. Additional 5 GHz radio
b. Captive portal
c. WIPS Sensor
d. Guest SSID Broadcast - answerc
What functionality do Firebox and XTM wireless devices have - answer•One built-in
radio supports up to three SSIDs
•Can be configured to use wireless for external (as a wireless client)
•Each wireless access point or client is configured as a network interface
When two AP devices paired to the same Firebox use the same SSID, what controls
wireless roaming behavior for wireless clients? (Select one.)
a. The Gateway Wireless Controller on the Firebox
b. The two AP devices
c. The wireless clients - answerc. Roaming behavior is controlled by the wireless clients,
not the AP devices or the Gateway Wireless Controller
What functionality do both Firebox - XTM wireless devices and WatchGuard AP devices
share - answerSupport 2.4 GHz and 5 GHz, 802.11a/b/g/n (802.11ac for T30-W, T50-
W, AP300)
Managed by WatchGuard System Manager, Fireware XTM Web UI, or CLI
,Name the Firebox and XTM devices with built-in wireless - answerFirebox T10-W, T30-
W, T50-W
XTM 25-W, XTM 26-W, XTM 33-W
Which of these options can you configure in the hotspot connection settings? (Select
three.)
a. Allow hotspot users to connect without credentials.
b. Allow hotspot users to connect without accepting Terms and Conditions.
c. Require hotspot users to authenticate with a user name and passphrase.
d. Require hotspot users to authenticate with only a passphrase.
e. Require users to authenticate with a VPN client. - answera, c, d. There are no options
to skip the Terms and Conditions or require a VPN client
Which passphrase does the Gateway Wireless Controller use to connect to a paired
WatchGuard AP device? (Select one.)
a. WPA/WPA2 (PSK) passphrase
b. Firebox configuration passphrase
c. Pairing passphrase
d. WatchGuard AP passphrase - answerd. The Gateway Wireless Controller uses the
WatchGuard AP passphrase to connect to all paired AP devices
If you enable VLAN tagging in an SSID, you must also enable management VLAN
tagging in the Gateway Wireless Controller settings.
a. True
b. False - answerb. (False) You can optionally enable management VLAN tagging, but it
is not required.
What happens if you configure an access point to support more than one mode -
answerOverall radio performance can decrease
Are management frames sent at the lowest or highest rate Sent at the lowest rate
supported by connected clients
Which of these wireless modes are supported on the 5 GHz radio band? (Select two.)
a. 802.11a
b. 802.11b
c. 802.11g
d. 802.11n - answera, d. The 5 GHz radio band supports 802.11a and 802.11n wireless
modes
When two AP devices paired to the same Firebox use the same SSID, what controls
wireless roaming behavior for wireless clients? (Select one.)
, a. The Gateway Wireless Controller on the Firebox
b. The two AP devices
c. The wireless clients - answerc. Roaming behavior is controlled by the wireless clients,
not the AP devices or the Gateway Wireless Controller
If you enable VLAN tagging in an SSID, you must also enable management VLAN
tagging in the Gateway Wireless Controller settings.
a. True
b. False - answerb. (False) You can optionally enable management VLAN tagging, but it
is not required.
Which passphrase does the Gateway Wireless Controller use to connect to a paired
WatchGuard AP device? (Select one.)
a. WPA/WPA2 (PSK) passphrase
b. Firebox configuration passphrase
c. Pairing passphrase
d. WatchGuard AP passphrase - answerd. The Gateway Wireless Controller uses the
WatchGuard AP passphrase to connect to all paired AP devices
Which of these options can you configure in the hotspot connection settings? (Select
three.)
a. Allow hotspot users to connect without credentials.
b. Allow hotspot users to connect without accepting Terms and Conditions.
c. Require hotspot users to authenticate with a user name and passphrase.
d. Require hotspot users to authenticate with only a passphrase.
e. Require users to authenticate with a VPN client. - answera, c, d. There are no options
to skip the Terms and Conditions or require a VPN client
Name the two types of WatchGuard wireless devices - answer1: Firebox and XTM
devices with built-in wireless access points
2: WatchGuard AP devices
Name the WatchGuard AP devices - answerAP100, AP200, AP300 - indoor
AP102 - indoor/outdoor
Name the Firebox and XTM devices with built-in wireless - answerFirebox T10-W, T30-
W, T50-W
XTM 25-W, XTM 26-W, XTM 33-W
with WatchGuard Cloud
Which of these wireless modes are supported on the 5 GHz radio band? (Select two.)
a. 802.11a and 802.11n
b. 802.11b and 802.11g
c. 802.11x
d. 802.11ac - answerad
What action must you perform before you can manage an AP with a Firebox? (Select
one.)
a. Configure the AP radios for the 2.4 and 5 GHz bands
b. Create an SSID to broadcast
c. Pair the AP with the Gateway Wireless Controller
d. Reset the AP to factory-default settings - answerc
It is a best practice to place APs near walls, corners, and metal objects to boost the
signal distance.
a. True
b. False - answerb
Which tool can you use on the Gateway Wireless Controller to check for channel
conflicts on your wireless network? (Select one.)
a. Access points tab on the Dashboard
b. Auto-deployment configuration
c. Rogue AP detection
d. Wireless maps - answerd
In Wi-Fi Cloud Manage, which of these Monitoring pages shows WIPS classifications for
clients? (Select one.)
a. Monitoring > Managed Devices
b. Monitoring > Security > Clients
c. Monitoring > Wi-Fi > Clients
d. Monitoring > Applications - answerb
In Wi-Fi Cloud, where do you set the security mode and encryption type for a wireless
network? (Select one.)
a. Device template
b. Authorized WLAN Policy
c. Security profile d. SSID profile - answerd
,In Wi-Fi Cloud, Device Templates applied to a location are inherited by location sub-
folders.
a. True
b. False - answerb
Which of these AP WIPS classifications refers to an device outside your network?
(Select one.)
a. External
b. Authorized
c. Rogue
d. Uncategorized - answera
Which Wi-Fi Cloud application do you use to create captive portal splash pages?
(Select one.)
a. Discover
b. Engage
c. Go
d. Manage
e. Analyze - answerb
In Wi-Fi Cloud, what is the third-radio used for on tri-radio APs? (Select one.)
a. Additional 5 GHz radio
b. Captive portal
c. WIPS Sensor
d. Guest SSID Broadcast - answerc
What functionality do Firebox and XTM wireless devices have - answer•One built-in
radio supports up to three SSIDs
•Can be configured to use wireless for external (as a wireless client)
•Each wireless access point or client is configured as a network interface
When two AP devices paired to the same Firebox use the same SSID, what controls
wireless roaming behavior for wireless clients? (Select one.)
a. The Gateway Wireless Controller on the Firebox
b. The two AP devices
c. The wireless clients - answerc. Roaming behavior is controlled by the wireless clients,
not the AP devices or the Gateway Wireless Controller
What functionality do both Firebox - XTM wireless devices and WatchGuard AP devices
share - answerSupport 2.4 GHz and 5 GHz, 802.11a/b/g/n (802.11ac for T30-W, T50-
W, AP300)
Managed by WatchGuard System Manager, Fireware XTM Web UI, or CLI
,Name the Firebox and XTM devices with built-in wireless - answerFirebox T10-W, T30-
W, T50-W
XTM 25-W, XTM 26-W, XTM 33-W
Which of these options can you configure in the hotspot connection settings? (Select
three.)
a. Allow hotspot users to connect without credentials.
b. Allow hotspot users to connect without accepting Terms and Conditions.
c. Require hotspot users to authenticate with a user name and passphrase.
d. Require hotspot users to authenticate with only a passphrase.
e. Require users to authenticate with a VPN client. - answera, c, d. There are no options
to skip the Terms and Conditions or require a VPN client
Which passphrase does the Gateway Wireless Controller use to connect to a paired
WatchGuard AP device? (Select one.)
a. WPA/WPA2 (PSK) passphrase
b. Firebox configuration passphrase
c. Pairing passphrase
d. WatchGuard AP passphrase - answerd. The Gateway Wireless Controller uses the
WatchGuard AP passphrase to connect to all paired AP devices
If you enable VLAN tagging in an SSID, you must also enable management VLAN
tagging in the Gateway Wireless Controller settings.
a. True
b. False - answerb. (False) You can optionally enable management VLAN tagging, but it
is not required.
What happens if you configure an access point to support more than one mode -
answerOverall radio performance can decrease
Are management frames sent at the lowest or highest rate Sent at the lowest rate
supported by connected clients
Which of these wireless modes are supported on the 5 GHz radio band? (Select two.)
a. 802.11a
b. 802.11b
c. 802.11g
d. 802.11n - answera, d. The 5 GHz radio band supports 802.11a and 802.11n wireless
modes
When two AP devices paired to the same Firebox use the same SSID, what controls
wireless roaming behavior for wireless clients? (Select one.)
, a. The Gateway Wireless Controller on the Firebox
b. The two AP devices
c. The wireless clients - answerc. Roaming behavior is controlled by the wireless clients,
not the AP devices or the Gateway Wireless Controller
If you enable VLAN tagging in an SSID, you must also enable management VLAN
tagging in the Gateway Wireless Controller settings.
a. True
b. False - answerb. (False) You can optionally enable management VLAN tagging, but it
is not required.
Which passphrase does the Gateway Wireless Controller use to connect to a paired
WatchGuard AP device? (Select one.)
a. WPA/WPA2 (PSK) passphrase
b. Firebox configuration passphrase
c. Pairing passphrase
d. WatchGuard AP passphrase - answerd. The Gateway Wireless Controller uses the
WatchGuard AP passphrase to connect to all paired AP devices
Which of these options can you configure in the hotspot connection settings? (Select
three.)
a. Allow hotspot users to connect without credentials.
b. Allow hotspot users to connect without accepting Terms and Conditions.
c. Require hotspot users to authenticate with a user name and passphrase.
d. Require hotspot users to authenticate with only a passphrase.
e. Require users to authenticate with a VPN client. - answera, c, d. There are no options
to skip the Terms and Conditions or require a VPN client
Name the two types of WatchGuard wireless devices - answer1: Firebox and XTM
devices with built-in wireless access points
2: WatchGuard AP devices
Name the WatchGuard AP devices - answerAP100, AP200, AP300 - indoor
AP102 - indoor/outdoor
Name the Firebox and XTM devices with built-in wireless - answerFirebox T10-W, T30-
W, T50-W
XTM 25-W, XTM 26-W, XTM 33-W
