Welding Level 1 Module 1 Review Exam 2025 Questions & Answers with 100% Correct Answers | Verified

Accidents are made more likely for employees in the age group - a. 18 and under Body protection while welding is best provided by wearing - c. Cotton clothing Which of the following is a correct statement - c. The recommended shade for SMAW welding is 10- 14 The potentially toxic coating that is used in galvanized metal is - a. Zinc To make sure your respirator provides proper protection you must__each time you wear it - b. Positive and Negative fit test must be performed A confined space is one that - d. Is large enough that an employee can bodily enter A space with an oxygen level below __percent is considered oxygen deficient - a. 19.5% A good area safety practice is - d. Writing HOT MATERIAL before leaving A hot work permit - a. Authorizes the performance of work potentially posing a fire hazard Cutting operations should never be performed without a__ in the area - c. A fire watch Before performing oxyfuel cutting on a cleaned container, fill the container with an inert gas or __ and position the container to displace as much air as possible from inside the container - c. Water Because of its instability, the acetylene gas used in oxyfuel cutting must remain at pressure less than__ PSI when in its gaseous form - b. 15 psi ( per square inch )