Millwright Rigging & Lifting Exam With Complete
Solutions 100% Verified!!
A temporary fastening to a rope to a ring is called?
a. square knot
b. tackle sling
c. choker
d. hitch - ANSWER>>d. hitch
Fastening the end of the rope so that the strands will not come undone
a. long lay
b. u bolt
c. whipping
d. clipped - ANSWER>>c. whipping
When unwinding a rope from a reel make the the rope__________?
a. is not over loaded
b. turns
c. is not backwards
d. is manilla - ANSWER>>b. turns
When rope has its strands and wires wound in the same direction it is?
a. right lay
b. left lay
c. long lay
,d. lang lay - ANSWER>>d. lang lay
When installing U bolt clips on a wire rope the U of the clip should bear against the
a. dead end of rope
b. lead end of rope
c. U clip
d. bevel joint - ANSWER>>a. dead end of rope
U bolt clips should be spaced 6 _____ apart
a. feet
b. inches
c. meters
d. rope diamters - ANSWER>>d. rope diamters
Guy wires give most support when they arepositioned at an angle from verticle of
a. 90
b. 60
c. 40
d. 45 - ANSWER>>d. 45
The most common method used to make an eye or attach a wire rope to equipment is
a. thimbles
b. swage socket
c, bolt
d, crosby clip - ANSWER>>d. crosby clip
80% rope strength
, Ubolt
double saddle
double base clamp
There are right and left hand crosby clips. Take care to fit right hand clips with
___________ and left hand clips with ________ rope
a. left lay, right lay
b. lang lay, right lay
c. right lay, left lay
d. lang lay, left lay - ANSWER>>c. right lay, left lay
All hoisting equipment with the exception of sorting hooks must be equipped with
a. safety drops
b. safety chains
c. safety catch
d. safety cams - ANSWER>>c. safety catch
Common types of choker hooks are standard, adjustable, sliding, and_______________
a. antislid
b. cross
d. straight
e. dual sliding - ANSWER>>e. dual sliding
Two types of shackles are commonly used in rigging, the bow type and
__________________
a. headace ball
b. D-type
Solutions 100% Verified!!
A temporary fastening to a rope to a ring is called?
a. square knot
b. tackle sling
c. choker
d. hitch - ANSWER>>d. hitch
Fastening the end of the rope so that the strands will not come undone
a. long lay
b. u bolt
c. whipping
d. clipped - ANSWER>>c. whipping
When unwinding a rope from a reel make the the rope__________?
a. is not over loaded
b. turns
c. is not backwards
d. is manilla - ANSWER>>b. turns
When rope has its strands and wires wound in the same direction it is?
a. right lay
b. left lay
c. long lay
,d. lang lay - ANSWER>>d. lang lay
When installing U bolt clips on a wire rope the U of the clip should bear against the
a. dead end of rope
b. lead end of rope
c. U clip
d. bevel joint - ANSWER>>a. dead end of rope
U bolt clips should be spaced 6 _____ apart
a. feet
b. inches
c. meters
d. rope diamters - ANSWER>>d. rope diamters
Guy wires give most support when they arepositioned at an angle from verticle of
a. 90
b. 60
c. 40
d. 45 - ANSWER>>d. 45
The most common method used to make an eye or attach a wire rope to equipment is
a. thimbles
b. swage socket
c, bolt
d, crosby clip - ANSWER>>d. crosby clip
80% rope strength
, Ubolt
double saddle
double base clamp
There are right and left hand crosby clips. Take care to fit right hand clips with
___________ and left hand clips with ________ rope
a. left lay, right lay
b. lang lay, right lay
c. right lay, left lay
d. lang lay, left lay - ANSWER>>c. right lay, left lay
All hoisting equipment with the exception of sorting hooks must be equipped with
a. safety drops
b. safety chains
c. safety catch
d. safety cams - ANSWER>>c. safety catch
Common types of choker hooks are standard, adjustable, sliding, and_______________
a. antislid
b. cross
d. straight
e. dual sliding - ANSWER>>e. dual sliding
Two types of shackles are commonly used in rigging, the bow type and
__________________
a. headace ball
b. D-type
