Page |1
DANTE CERTIFICATION LEVEL 2 (2ND
EDITION) 2025| BRAND NEW ACTUAL EXAM
WITH 100% VERIFIED QUESTIONS AND
CORRECT SOLUTIONS| GUARANTEED VALUE
PACK| ACE YOUR GRADES.
1. What protocol is used to synchronize Dante devices across the
network? - correct answer - PTP (Precision Time Protocol)
2. A unicast subscription is made between two Dante devices. The default
latency settings of the transmitter and receiver are 0.25msec and
0.5msec, respectively. What is the resulting latency of this stream? -
correct answer - .5msec
3. When a Dante preset is saved, where is the information kept? - correct
answer - Dante Controller writes a text file (XML format) to the
computer. This file can be shared to other users or archived for recall
later. When the preset is recalled, Dante Controller systematically
restores settings, one at a time.
4. Which Dante software supports redundant connections? - correct
answer - Dante Controller
, Page |2
5. If a Dante transmitter runs out of flows, what should you do to enable all
subscriptions to be made? - correct answer - Flip stream(s) to multicast
so it only takes one flow for multiple destinations.
6. If a Dante device is in redundant mode, can the ports use different
configuration methods? For instance, can the primary port be set to a
Static IP and the secondary follow Link Local? - correct answer - Yes
The Dante clock leader election is an automatic process. However, you
can manually influence which device will win the election. What option
would give a device the highest priority in the election process? - correct
answer - Preferred Leader checked.
7. Suppose a Dante device has one channel and two transmit flows. Can it
connect to three different receiving devices? - correct answer - Yes.
Minimum recommended latency could be as low as 0.5 msec.
8. Approximately how much bandwidth does a unicast audio flow use? (4-
ch, 24-bit, 48kHz, 1msec latency) - correct answer - 6Mbps
9. Dante Controller can apply information in a Dante preset to a device of a
different model. For instance, if a 4-channel 70V amplifier is replaced
with an 8-channel model, it could save the IP settings, device name, as
well as channel labels and subscriptions for the first four channels. -
correct answer - True
DANTE CERTIFICATION LEVEL 2 (2ND
EDITION) 2025| BRAND NEW ACTUAL EXAM
WITH 100% VERIFIED QUESTIONS AND
CORRECT SOLUTIONS| GUARANTEED VALUE
PACK| ACE YOUR GRADES.
1. What protocol is used to synchronize Dante devices across the
network? - correct answer - PTP (Precision Time Protocol)
2. A unicast subscription is made between two Dante devices. The default
latency settings of the transmitter and receiver are 0.25msec and
0.5msec, respectively. What is the resulting latency of this stream? -
correct answer - .5msec
3. When a Dante preset is saved, where is the information kept? - correct
answer - Dante Controller writes a text file (XML format) to the
computer. This file can be shared to other users or archived for recall
later. When the preset is recalled, Dante Controller systematically
restores settings, one at a time.
4. Which Dante software supports redundant connections? - correct
answer - Dante Controller
, Page |2
5. If a Dante transmitter runs out of flows, what should you do to enable all
subscriptions to be made? - correct answer - Flip stream(s) to multicast
so it only takes one flow for multiple destinations.
6. If a Dante device is in redundant mode, can the ports use different
configuration methods? For instance, can the primary port be set to a
Static IP and the secondary follow Link Local? - correct answer - Yes
The Dante clock leader election is an automatic process. However, you
can manually influence which device will win the election. What option
would give a device the highest priority in the election process? - correct
answer - Preferred Leader checked.
7. Suppose a Dante device has one channel and two transmit flows. Can it
connect to three different receiving devices? - correct answer - Yes.
Minimum recommended latency could be as low as 0.5 msec.
8. Approximately how much bandwidth does a unicast audio flow use? (4-
ch, 24-bit, 48kHz, 1msec latency) - correct answer - 6Mbps
9. Dante Controller can apply information in a Dante preset to a device of a
different model. For instance, if a 4-channel 70V amplifier is replaced
with an 8-channel model, it could save the IP settings, device name, as
well as channel labels and subscriptions for the first four channels. -
correct answer - True
