INRAT BUNDLED
QUESTIONS AND ANSWERS
WITH VERIFIED SOLUTIONS
GRADED A+ UPDATED 2025
ALREADY PASSED!!!
,Inrat - Canada Air Pilot Questions And
Answers With Verified Solutions Already
Passed!!!
When is minima for straight in landing published? - ANSWER✔✔ - A normal rate
of descent can be made from the FAF to the runway threshold
- Final approach track intersects the extended runway centreline within 30
degrees
All chart distances are expressed in _____miles - ANSWER✔✔ nautical
Visibility is expressed in ____ miles - ANSWER✔✔ statute
Bearings, tracks and headings are expressed in ________ - ANSWER✔✔
magnetic unless marked G for grid or T for true
Runway numbers are provided in the procedure identification when?
Select one:
a.When an approach can be made to straight-in minima.
b.When the approach intersects the runway extended centre-line at more than 30
degrees.
c.When an approach can be made to circling minima.
d.When there's an abnormal descent gradient from the FAF to the MAP.
Feedback - ANSWER✔✔ a
,The term "Straight in Approach", used by ATC, indicates that?
Select one:
a.Final approach track intersects the runway at less than 30 degrees.
b.A normal descent rate can't be made from the FAF to the threshold.
c.The approach is conducted so that a procedure turn will not be performed.
d.A normal descent rate can be made from the FAF to the threshold. -
ANSWER✔✔ C
Question text
When the final approach track intersects the extended runway centerline at less
than a 30 degree angle?
Select one:
a.Straight in minima is not authorized.
b.A straight in approach may not be conducted.
c.Circling minima will be published.
d.Straight in minima is published. - ANSWER✔✔ D
Question text
When an abnormal descent rate is required from the FAF to the threshold?
Select one:
a.Minima for straight in landing will not be published.
b.Greater than 400 ft.NM will be required.
c.Runway numbers will be omitted from the procedure identification.
d.All of the above.
Feedback - ANSWER✔✔ D
, An approach procedure contains the term "NDB B" - what does this imply?
Select one:
a.Descent to straight in minima is authorized.
b.Two NDB's are required.
c.Only circling minima is authorized.
d.This is a precision approach with an NDB as the FAF. - ANSWER✔✔ c
Which of the following is incorrect regarding the CAP?
Select one:
a.
Elevations and altitudes below 18,000' are expressed in feet above MSL. b.
In the SDA transition altitude is FL180.
c.
Bearings, tracks, and headings are magnetic unless otherwise indicated. d.
Minimum altitudes always meet obstacle clearance requirements. - ANSWER✔✔
D
Multiple procedures are?
Select one:
a.
Separated in the title by the term 'if'.
b.
Not approved.
QUESTIONS AND ANSWERS
WITH VERIFIED SOLUTIONS
GRADED A+ UPDATED 2025
ALREADY PASSED!!!
,Inrat - Canada Air Pilot Questions And
Answers With Verified Solutions Already
Passed!!!
When is minima for straight in landing published? - ANSWER✔✔ - A normal rate
of descent can be made from the FAF to the runway threshold
- Final approach track intersects the extended runway centreline within 30
degrees
All chart distances are expressed in _____miles - ANSWER✔✔ nautical
Visibility is expressed in ____ miles - ANSWER✔✔ statute
Bearings, tracks and headings are expressed in ________ - ANSWER✔✔
magnetic unless marked G for grid or T for true
Runway numbers are provided in the procedure identification when?
Select one:
a.When an approach can be made to straight-in minima.
b.When the approach intersects the runway extended centre-line at more than 30
degrees.
c.When an approach can be made to circling minima.
d.When there's an abnormal descent gradient from the FAF to the MAP.
Feedback - ANSWER✔✔ a
,The term "Straight in Approach", used by ATC, indicates that?
Select one:
a.Final approach track intersects the runway at less than 30 degrees.
b.A normal descent rate can't be made from the FAF to the threshold.
c.The approach is conducted so that a procedure turn will not be performed.
d.A normal descent rate can be made from the FAF to the threshold. -
ANSWER✔✔ C
Question text
When the final approach track intersects the extended runway centerline at less
than a 30 degree angle?
Select one:
a.Straight in minima is not authorized.
b.A straight in approach may not be conducted.
c.Circling minima will be published.
d.Straight in minima is published. - ANSWER✔✔ D
Question text
When an abnormal descent rate is required from the FAF to the threshold?
Select one:
a.Minima for straight in landing will not be published.
b.Greater than 400 ft.NM will be required.
c.Runway numbers will be omitted from the procedure identification.
d.All of the above.
Feedback - ANSWER✔✔ D
, An approach procedure contains the term "NDB B" - what does this imply?
Select one:
a.Descent to straight in minima is authorized.
b.Two NDB's are required.
c.Only circling minima is authorized.
d.This is a precision approach with an NDB as the FAF. - ANSWER✔✔ c
Which of the following is incorrect regarding the CAP?
Select one:
a.
Elevations and altitudes below 18,000' are expressed in feet above MSL. b.
In the SDA transition altitude is FL180.
c.
Bearings, tracks, and headings are magnetic unless otherwise indicated. d.
Minimum altitudes always meet obstacle clearance requirements. - ANSWER✔✔
D
Multiple procedures are?
Select one:
a.
Separated in the title by the term 'if'.
b.
Not approved.
