HIMARS Safety questions and answers
already passed
What manual & appendix covers MLRS/HIMARS Battalion Safety? - correct answer
✔✔ATP 3-09.60, appendix G
Safety data for the m270a1 is the same as HIMARS, true or false? - correct answer
✔✔False
To develop MLRS/HIMARS safety data, there are 3 things that must be done.
Which of the following is not one of those three? Obtain/develop a (range
specific) range safety card. Develop a surface danger zone diagram. Develop a
safety T based on munitions and current meteorology. Determine usable portion
of the impact area. - correct answer ✔✔Determine usable portion of the impact
area.
The surface danger zone diagram is developed and maintained in the _________. -
correct answer ✔✔Fire direction center
The surface danger zone consists of all but which of the following? Area E. Target
area. Safety fan. Area F. - correct answer ✔✔Area E.
This area is immediately behind the firing point or area that is at risk from blast
and debris, which no one may occupy. - correct answer ✔✔Launcher danger area
Area F is comprised of the launch or danger area and the _________. - correct
answer ✔✔Noise hazard area
, This is the danger area directly in front of the firingpoint or operational area. -
correct answer ✔✔Exclusion area I
This is the danger area between the forward limit of exclusion area one and the
SDZ impact area. - correct answer ✔✔Exclusion area II
This distance is wide enough to include all debris (payload, warhead skin, and
rocket motor) to either side of the target from normally functioning rounds -
correct answer ✔✔Distance W
A distance beyond the target adequate to contain a properly functioning Rocket. -
correct answer ✔✔Distance X
A distance short of the target sufficient to include all debris (payload warhead skin
and rocket motor) from normally functioning rounds - correct answer
✔✔Distance Y
______ Consists of the launcher danger area and noise hazard area. - correct
answer ✔✔Area F
There are _______ methods to compute safety data for MLRS/HIMARS - correct
answer ✔✔3
Which of the following methods are used to compute safety data for HIMARS?
Operational area method. Point-to-point method. Firing point Method. All of the
above. - correct answer ✔✔All of the above
already passed
What manual & appendix covers MLRS/HIMARS Battalion Safety? - correct answer
✔✔ATP 3-09.60, appendix G
Safety data for the m270a1 is the same as HIMARS, true or false? - correct answer
✔✔False
To develop MLRS/HIMARS safety data, there are 3 things that must be done.
Which of the following is not one of those three? Obtain/develop a (range
specific) range safety card. Develop a surface danger zone diagram. Develop a
safety T based on munitions and current meteorology. Determine usable portion
of the impact area. - correct answer ✔✔Determine usable portion of the impact
area.
The surface danger zone diagram is developed and maintained in the _________. -
correct answer ✔✔Fire direction center
The surface danger zone consists of all but which of the following? Area E. Target
area. Safety fan. Area F. - correct answer ✔✔Area E.
This area is immediately behind the firing point or area that is at risk from blast
and debris, which no one may occupy. - correct answer ✔✔Launcher danger area
Area F is comprised of the launch or danger area and the _________. - correct
answer ✔✔Noise hazard area
, This is the danger area directly in front of the firingpoint or operational area. -
correct answer ✔✔Exclusion area I
This is the danger area between the forward limit of exclusion area one and the
SDZ impact area. - correct answer ✔✔Exclusion area II
This distance is wide enough to include all debris (payload, warhead skin, and
rocket motor) to either side of the target from normally functioning rounds -
correct answer ✔✔Distance W
A distance beyond the target adequate to contain a properly functioning Rocket. -
correct answer ✔✔Distance X
A distance short of the target sufficient to include all debris (payload warhead skin
and rocket motor) from normally functioning rounds - correct answer
✔✔Distance Y
______ Consists of the launcher danger area and noise hazard area. - correct
answer ✔✔Area F
There are _______ methods to compute safety data for MLRS/HIMARS - correct
answer ✔✔3
Which of the following methods are used to compute safety data for HIMARS?
Operational area method. Point-to-point method. Firing point Method. All of the
above. - correct answer ✔✔All of the above
