Safety Inspection Test (Minimum
Inspection Station Requirements)
Complete Questions And Answers
Each station must have what? CORRECT ANSWERS A inspection area within an
enclosed building of sufficient
*Length
*Width and Height
To accommodate the type of vehicle being inspected.
Class A and D stations are required to? CORRECT ANSWERS Accommodate a
commercial vehicle.
Class B stations must? CORRECT ANSWERS Accommodate a full-size domestic made
passenger vehicle.
Class C stations are required to? CORRECT ANSWERS Have a sufficient length and
width to inspect full-size motorcycles.
The Inspection Station shall be substantially? CORRECT ANSWERS Level and
constructed of hard material, such as asphalt or concrete. It needs to be adjacent to the
official vehicle inspection station.
The outside inspection area may be? CORRECT ANSWERS Approved for the
inspection of commercial vehicles at Class B stations, if it is sufficient length and width
of the vehicle or combination of vehicles being inspected.
The station must be in compliance with? CORRECT ANSWERS *Applicable City
*County and state regulations relating to zoning
*Merchant licensing
*Fictitious name and retail sales tax number
Inside Inspection the area shall be? CORRECT ANSWERS *Sufficiently lighted
*Adequately heated
*Properly ventilated
The floor must be? CORRECT ANSWERS *Substantially level and constructed of a
hard material
*Kept clean
*Free from excessive dirt
*Free from greases and loose material
What type of floors are not accepted? CORRECT ANSWERS *Dirt
Inspection Station Requirements)
Complete Questions And Answers
Each station must have what? CORRECT ANSWERS A inspection area within an
enclosed building of sufficient
*Length
*Width and Height
To accommodate the type of vehicle being inspected.
Class A and D stations are required to? CORRECT ANSWERS Accommodate a
commercial vehicle.
Class B stations must? CORRECT ANSWERS Accommodate a full-size domestic made
passenger vehicle.
Class C stations are required to? CORRECT ANSWERS Have a sufficient length and
width to inspect full-size motorcycles.
The Inspection Station shall be substantially? CORRECT ANSWERS Level and
constructed of hard material, such as asphalt or concrete. It needs to be adjacent to the
official vehicle inspection station.
The outside inspection area may be? CORRECT ANSWERS Approved for the
inspection of commercial vehicles at Class B stations, if it is sufficient length and width
of the vehicle or combination of vehicles being inspected.
The station must be in compliance with? CORRECT ANSWERS *Applicable City
*County and state regulations relating to zoning
*Merchant licensing
*Fictitious name and retail sales tax number
Inside Inspection the area shall be? CORRECT ANSWERS *Sufficiently lighted
*Adequately heated
*Properly ventilated
The floor must be? CORRECT ANSWERS *Substantially level and constructed of a
hard material
*Kept clean
*Free from excessive dirt
*Free from greases and loose material
What type of floors are not accepted? CORRECT ANSWERS *Dirt
