QUESTIONS AND CORRECT DETAILED
ANSWERS
All riggin shall have how many checks prior to Loading? - (correct answer) -3
il il il il il il il il il il il il il
All equip. that falls 3 ft onto a hard surface shall be checked for: - (correct answer) -Burs,
il il il il il il il il il il il il il il il il il
sharp edges, dirt, contaminates, lose parts and deformaties
il il il il il il il il
Rope deployed from the anchor point to the ground should be deployed: - (correct answer)
il il il il il il il il il il il il il il
-So only the amount needed is with a dynamic anchor
il il il il il il il il il il
Helmets used for rope rescue should be: - (correct answer) -Lighter in weight
il il il il il il il il il il il il
Rope gloves shall be - (correct answer) -Sturdy formfitting gloves with a leather palm
il il il il il il il il il il il il il
T/F: Fall protection (travel restraint) at the edge shall be long enough for the edge attendant
il il il il il il il il il il il il il il il
to go over the edge and no farther - (correct answer) -False
il il il il il il il il il il il il
A class one harness is designed to stop rescuer when he: - (correct answer) -Reaches the
il il il il il il il il il il il il il il il
edge
il
T/F: Class two harnesses are designed for 600 lb loads and will not keep the rescuer in an
il il il il il il il il il il il il il il il il il
up-right position if they become unconscious. - (correct answer) -True
il il il il il il il il il il
Class three harnesses are: - (correct answer) -Designed to keep the rescuer or victim in an
il il il il il il il il il il il il il il il
up-right position
il il
T/F: A person that falls in a harness and is suspended and unable to stand on a solid
il il il il il il il il il il il il il il il il il
surface should lift their legs into a sitting position and avoid moving. - (correct answer) -
il il il il il il il il il il il il il il il il
True
T/F: When working in a harness with free mobility a person should keep your legs moving
il il il il il il il il il il il il il il il
as much as possible - (correct answer) -True
il il il il il il il il
T/F: A person that falls and is trapped and unable to lift their legs should squeeze their legs
il il il il il il il il il il il il il il il il il
legs every 5 seconds until help arrives - (correct answer) -True
il il il il il il il il il il il
The 1st medical consideration for a victim in a class three harness that falls and becomes
il il il il il il il il il il il il il il il
unconscious is: - (correct answer) -Airway patency
il il il il il il il
When a person is rescued from harness suspension they should be: - (correct answer) -
il il il il il il il il il il il il il il
Assessed, ABC's, immobilization and transported in a sitting position il il il il il il il il
, All harness construction and testing standards are covered in NFPA: - (correct answer) -
il il il il il il il il il il il il il
1983
T/F: Personnel at a rescue scene whether they are workers, IC, safety officer all have the
il il il il il il il il il il il il il il il
ability to call a stop during rope rescue operations if they see an unsafe operation - (correct
il il il il il il il il il il il il il il il il il
answer) -True
il il
A helmet used for repor rescue should be an approved light weight helmet with a: - (correct
il il il il il il il il il il il il il il il il
answer) -3 point strap position under the chin
il il il il il il il il
Care and maintenance of all rescue equipment should be per: - (correct answer) -the
il il il il il il il il il il il il il
helmet's manufacturer recommendations
il il il
T/F: Care should be taken when rope is under tension not to allow a second rope under
il il il il il il il il il il il il il il il il
tension (a line) to run across the stationary rope under tension. This will cause a nylon on
il il il il il il il il il il il il il il il il il
nylon situation that can burn through a rope quickly - (correct answer) -True
il il il il il il il il il il il il il
Most rope failures are caused by: - (correct answer) -Abrasion
il il il il il il il il il
Rope that will lose strength when wet is: - (correct answer) -Nylon
il il il il il il il il il il il
Polyester handles shock loads: - (correct answer) -Not as well as nylon il il il il il il il il il il il
Pylopropylene rope: - (correct answer) -Has a good chemical resistance il il il il il il il il il
Examples of natural fiber ropes include: - (correct answer) -Cotton, sisal , manila il il il il il il il il il il il il
Laid rope can be damaged by abrasion easier because: - (correct answer) -100% of the
il il il il il il il il il il il il il il
ropes fibers come to the surface at some point along its' length
il il il il il il il il il il il il
Braided ropes are/have: - (correct answer) -easy to pick bundles in soft braids
il il il il il il il il il il il il
Kernmantle construction consists of a: - (correct answer) -continuous core of fibers il il il il il il il il il il il
Major factors affecting rope strength include: - (correct answer) -History, diameter, type of
il il il il il il il il il il il il
construction and material used
il il il il
Rope with a 20 kN T rating (old L rating) are designed with a minimum tensile strength of: -
il il il il il il il il il il il il il il il il il il
(correct answer) -4496 lbf
il il il il
Rope with a G rating of 8992 lbf has a kN rating of: - (correct answer) -40
il il il il il il il il il il il il il il il il
The qualities of good knots, bends and hitches are: - (correct answer) -Determined by the
il il il il il il il il il il il il il il
ease of tying and untying after loading
il il il il il il il
The figure-8 is the strongest loop knot when tied: - (correct answer) -with an inside bight
il il il il il il il il il il il il il il il
The butterfly knot is designed for: - (correct answer) -Multi-directional loading
il il il il il il il il il il