CSWA SOLIDWORKS CERTIFICATION EXAM TEST WITH ANSWERS
1. True or False - Drag- False
ging the edge of plane
changes its geometric
size.
2. These following methods Selecting a plane in the graphics area and then
can be used to begin a clicking on the Sketch button in the Command-
sketch on a plane. Manager, clicking on the Sketch button in the
CommandManager and then selecting a plane,
right-clicking on a plane and selecting "Sketch"
from the context toolbar
3. This axis of the reference Y-axis
triad should be clicked to
change the view normal
to the Top plane
4. True or False - In order to False
sketch on a face of a body,
the face must be paral-
lel with one of the three
default planes in SOLID-
WORKS.
5. True or False - A face True
must be planar in order to
have a sketch drawn on it.
6. The Smart Dimension tool The geometry you select
determines what type of
dimension to add by
7. You access the "Smart Di- Launching the Shortcut Toolbar by pressing
mension" tool by "S" on the keyboard and click "Smart Dimen-
sion", using mouse-gestures by right-clicking
and dragging up in the graphics area, clicking
the "Smart Dimension" icon from the Sketch tab
of the CommandManager
8. Radial
, CSWA SOLIDWORKS CERTIFICATION EXAM TEST WITH ANSWERS
The Smart Dimension tool
automatically adds what
type of dimension when
you select an arc?
9. How can you edit the Using the spinbox to increase or decrease the
value of a dimension by value, using the arrows to increase or decrease
using the Modify Dialog the value, clicking in the window and type in a
box? new value
10. True or False - When True
dimensioning to center-
lines, SOLIDWORKS pro-
vides the ability to change
from linear to diameter di-
mensions.
11. Which is not an available snap to axes
option for a line?
12. Which line type allows Angle
dimensions to be added
with the creation of the
line?
13. What method will not con- Selecting a line, clicking "Centerline" button in
vert a line to a construc- the CommandManager
tion line?
14. True or False - When True
a corner rectangle is
sketched, two of the sides
are automatically set to
horizontal and the other
two are automatically set
to vertical.
15. What type of rectan- Center Rectangle
gle tool adds centerlines
1. True or False - Drag- False
ging the edge of plane
changes its geometric
size.
2. These following methods Selecting a plane in the graphics area and then
can be used to begin a clicking on the Sketch button in the Command-
sketch on a plane. Manager, clicking on the Sketch button in the
CommandManager and then selecting a plane,
right-clicking on a plane and selecting "Sketch"
from the context toolbar
3. This axis of the reference Y-axis
triad should be clicked to
change the view normal
to the Top plane
4. True or False - In order to False
sketch on a face of a body,
the face must be paral-
lel with one of the three
default planes in SOLID-
WORKS.
5. True or False - A face True
must be planar in order to
have a sketch drawn on it.
6. The Smart Dimension tool The geometry you select
determines what type of
dimension to add by
7. You access the "Smart Di- Launching the Shortcut Toolbar by pressing
mension" tool by "S" on the keyboard and click "Smart Dimen-
sion", using mouse-gestures by right-clicking
and dragging up in the graphics area, clicking
the "Smart Dimension" icon from the Sketch tab
of the CommandManager
8. Radial
, CSWA SOLIDWORKS CERTIFICATION EXAM TEST WITH ANSWERS
The Smart Dimension tool
automatically adds what
type of dimension when
you select an arc?
9. How can you edit the Using the spinbox to increase or decrease the
value of a dimension by value, using the arrows to increase or decrease
using the Modify Dialog the value, clicking in the window and type in a
box? new value
10. True or False - When True
dimensioning to center-
lines, SOLIDWORKS pro-
vides the ability to change
from linear to diameter di-
mensions.
11. Which is not an available snap to axes
option for a line?
12. Which line type allows Angle
dimensions to be added
with the creation of the
line?
13. What method will not con- Selecting a line, clicking "Centerline" button in
vert a line to a construc- the CommandManager
tion line?
14. True or False - When True
a corner rectangle is
sketched, two of the sides
are automatically set to
horizontal and the other
two are automatically set
to vertical.
15. What type of rectan- Center Rectangle
gle tool adds centerlines
