OSHA Basic Orientation Plus Exam Test Questions with Verified Answers
1. Fall Protection What is the most frequently cited OSHA violation?
2. Management What key elements are essential to recognizing hazards
commitment and and reducing or eliminating workplace hazards?
employee
involvement
3. True You are encouraged to ask your coworkers/supervisor for
information whenever you have a problem or are in doubt
about what to do on a job?
4. True It is your responsibility to follow all safety regulations,
inform your employer of any unsafe condition; report all
injuries no matter how minor they seem and wear the
proper personal protective equipment?
5. Process safe- The OSHA standard that addresses the requirements for
ty management preventing and lessening the results of a bad release of
Standard toxic, reactive, flammable, or highly explosive hazardous
chemicals from a process
6. Evaluated, Con- The process Hazard Analysis (PHA) is one of the most
trolled, and Identi- important parts of the PSM program. PHAs are used to
fied identify and evaluate major processes and ensure they
are
7. True In the PSM standard OSHA states employees must be
trained if they work with highly hazardous chemicals.
8. False Facilities are not permitted to control your entrance and
exit in covered process areas.
9. Safety What should be your first concern from the moment you
enter the work site?
10. True Under the Stop Work Authority, you have the right and
obligation to stop a work activity if you have reason to be-
lieve your own safety or a coworkers safety is in jeopardy
or if the work plan is not clearly established or understood
.
1/5
, OSHA Basic Orientation Plus Exam Test Questions with Verified Answers
11. qualified only au- What's needed in order to operate a plant-owned vehicle
thorized only or mobile equipment while at a facility
12. safe work permits What type of work permits you may encounter on the job
confined space
entry permits,
hot work per-
mits, line entry
or line break-
ing permits, lock-
out/tagout per-
mits
13. Management of if you are replacing a piece of equipment the new one
change should be the same as the one being removed. If its not
you should find out whether the change was on purpose.
what is this called
14. Danger Used only where an immediate life threatening hazard
exists
15. Warning Sign Used where immediate non life threatening hazards exist
16. Caution signs Used to warn against potential hazards or to caution
against unsafe practices
17. Barriers Physical devices that are designed to prevent entry into
an area where hazards are present.
18. Barricade Obstacles that discourage the passage of persons or
vehicles
19. Knees When lifting or setting down a load, bend at the
20. report it to If you experience pain or discomfort as a result of your
your supervisor work activities, you should do what?
as soon as possi-
ble
2/5
1. Fall Protection What is the most frequently cited OSHA violation?
2. Management What key elements are essential to recognizing hazards
commitment and and reducing or eliminating workplace hazards?
employee
involvement
3. True You are encouraged to ask your coworkers/supervisor for
information whenever you have a problem or are in doubt
about what to do on a job?
4. True It is your responsibility to follow all safety regulations,
inform your employer of any unsafe condition; report all
injuries no matter how minor they seem and wear the
proper personal protective equipment?
5. Process safe- The OSHA standard that addresses the requirements for
ty management preventing and lessening the results of a bad release of
Standard toxic, reactive, flammable, or highly explosive hazardous
chemicals from a process
6. Evaluated, Con- The process Hazard Analysis (PHA) is one of the most
trolled, and Identi- important parts of the PSM program. PHAs are used to
fied identify and evaluate major processes and ensure they
are
7. True In the PSM standard OSHA states employees must be
trained if they work with highly hazardous chemicals.
8. False Facilities are not permitted to control your entrance and
exit in covered process areas.
9. Safety What should be your first concern from the moment you
enter the work site?
10. True Under the Stop Work Authority, you have the right and
obligation to stop a work activity if you have reason to be-
lieve your own safety or a coworkers safety is in jeopardy
or if the work plan is not clearly established or understood
.
1/5
, OSHA Basic Orientation Plus Exam Test Questions with Verified Answers
11. qualified only au- What's needed in order to operate a plant-owned vehicle
thorized only or mobile equipment while at a facility
12. safe work permits What type of work permits you may encounter on the job
confined space
entry permits,
hot work per-
mits, line entry
or line break-
ing permits, lock-
out/tagout per-
mits
13. Management of if you are replacing a piece of equipment the new one
change should be the same as the one being removed. If its not
you should find out whether the change was on purpose.
what is this called
14. Danger Used only where an immediate life threatening hazard
exists
15. Warning Sign Used where immediate non life threatening hazards exist
16. Caution signs Used to warn against potential hazards or to caution
against unsafe practices
17. Barriers Physical devices that are designed to prevent entry into
an area where hazards are present.
18. Barricade Obstacles that discourage the passage of persons or
vehicles
19. Knees When lifting or setting down a load, bend at the
20. report it to If you experience pain or discomfort as a result of your
your supervisor work activities, you should do what?
as soon as possi-
ble
2/5
