Electrical Level 2 Module 6 Exam
Questions and Answers 100% Solved
Where several conductors are pulled together, they should be
arranged ________ on the fish tape. - ✔✔Staggered
When available a ______ is ideal for lifting and transporting cable
reels. - ✔✔forklift
The device used to clean and check a raceway system for
obstructions is a _____ . - ✔✔Mandrel
A ____ wire-pulling rope is not commonly used today. - ✔✔Hemp
A ____ wire-pulling rope commonly used today. - ✔✔Nylon
____ capable of cutting through conductors through 1,000 kcmil
save time over using a hacksaw. - ✔✔Cable Cutters
The substance used to lessen the friction inside a raceway during
a wire pull is _____. - ✔✔wire pulling lubricant (soap)
1
©NINJANERD 2024/2025. YEAR PUBLISHED 2024.
, The feed-in setup should unreel the cable _____. - ✔✔along its
natural curvature
In many cases especially long pulls workers prefer to use 3 or 4
hole _____ with setscrews that secure conductors to the set
block. - ✔✔cable grips
Conductors in vertical raceways must be in accordance with____.
- ✔✔Nec section 300.19
In general one conductor support must be provided _____. -
✔✔at or as close as possible to the top of the vertical raceway
A runaway in a vertical pull is caused when ____ and the cable
falls at a rapid rate down the raceway run. - ✔✔the weight of the
cable combined with gravity exceeds the speed of the pull
A good place to find data for pulling certain brands of cables is
from ____. - ✔✔Manufacturers Catalogs
The main purpose of a dynamometer is _________. - ✔✔to read
dynamic friction (pulling force) during a cable pull
2
©NINJANERD 2024/2025. YEAR PUBLISHED 2024.
Questions and Answers 100% Solved
Where several conductors are pulled together, they should be
arranged ________ on the fish tape. - ✔✔Staggered
When available a ______ is ideal for lifting and transporting cable
reels. - ✔✔forklift
The device used to clean and check a raceway system for
obstructions is a _____ . - ✔✔Mandrel
A ____ wire-pulling rope is not commonly used today. - ✔✔Hemp
A ____ wire-pulling rope commonly used today. - ✔✔Nylon
____ capable of cutting through conductors through 1,000 kcmil
save time over using a hacksaw. - ✔✔Cable Cutters
The substance used to lessen the friction inside a raceway during
a wire pull is _____. - ✔✔wire pulling lubricant (soap)
1
©NINJANERD 2024/2025. YEAR PUBLISHED 2024.
, The feed-in setup should unreel the cable _____. - ✔✔along its
natural curvature
In many cases especially long pulls workers prefer to use 3 or 4
hole _____ with setscrews that secure conductors to the set
block. - ✔✔cable grips
Conductors in vertical raceways must be in accordance with____.
- ✔✔Nec section 300.19
In general one conductor support must be provided _____. -
✔✔at or as close as possible to the top of the vertical raceway
A runaway in a vertical pull is caused when ____ and the cable
falls at a rapid rate down the raceway run. - ✔✔the weight of the
cable combined with gravity exceeds the speed of the pull
A good place to find data for pulling certain brands of cables is
from ____. - ✔✔Manufacturers Catalogs
The main purpose of a dynamometer is _________. - ✔✔to read
dynamic friction (pulling force) during a cable pull
2
©NINJANERD 2024/2025. YEAR PUBLISHED 2024.
