Carpentry Module 2: Review Exam
Questions and Answers 100% Pass
The type of bolt that is used to attatch the sillplate to the
foundation is the ____________. - ✔✔Anchor bolt
When calculating the amount of concrete needed, the unit of
measure is _________. - ✔✔Cubic yards
Which of the following nails would normally not be used to secure
interior trim? - ✔✔Box nail
Wood products that are sustainably harvested are certified by the
_____. - ✔✔Forest Stewardship Council
Ten-guage steel studs are classified as ____. - ✔✔Structural
steel studs
Which of the following types of sheet material is used in high wear
applications such as concrete forms, cabinets, and countertops? -
✔✔HDO
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, Plywood that is typically used to manufacture doors, furniture, and
cabinets is known as ___. - ✔✔Hardwood plywood
How many board feet are there in 2''x10''x15'' joists? - ✔✔750
Which of these grading classifications would describe a piece of
lumber 3'' in thickness and 8'' wide? - ✔✔Joists and planks
Nail lengths are expressed in penny designations, the symbol
used to represent penny is ____. - ✔✔d
Material handling accidents are more likely to happen when ____.
- ✔✔Workers are new or inexperienced at a job
Many adhesives and cements are flammable and/or explosive.
Store them in an area that is _____. - ✔✔Well ventilated
If a lag screw's head will rest directly on wood when installed, use
a _____. - ✔✔Flat washer
Lumber that is stored outdoors should be _____. - ✔✔Stacked on
lengths of scrap lumber
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
Questions and Answers 100% Pass
The type of bolt that is used to attatch the sillplate to the
foundation is the ____________. - ✔✔Anchor bolt
When calculating the amount of concrete needed, the unit of
measure is _________. - ✔✔Cubic yards
Which of the following nails would normally not be used to secure
interior trim? - ✔✔Box nail
Wood products that are sustainably harvested are certified by the
_____. - ✔✔Forest Stewardship Council
Ten-guage steel studs are classified as ____. - ✔✔Structural
steel studs
Which of the following types of sheet material is used in high wear
applications such as concrete forms, cabinets, and countertops? -
✔✔HDO
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, Plywood that is typically used to manufacture doors, furniture, and
cabinets is known as ___. - ✔✔Hardwood plywood
How many board feet are there in 2''x10''x15'' joists? - ✔✔750
Which of these grading classifications would describe a piece of
lumber 3'' in thickness and 8'' wide? - ✔✔Joists and planks
Nail lengths are expressed in penny designations, the symbol
used to represent penny is ____. - ✔✔d
Material handling accidents are more likely to happen when ____.
- ✔✔Workers are new or inexperienced at a job
Many adhesives and cements are flammable and/or explosive.
Store them in an area that is _____. - ✔✔Well ventilated
If a lag screw's head will rest directly on wood when installed, use
a _____. - ✔✔Flat washer
Lumber that is stored outdoors should be _____. - ✔✔Stacked on
lengths of scrap lumber
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
