Carpentry 2 Module 5 Exam Questions
and Answers 100% Solved | Rated A+
. Before beginning a roofing project, potential safety problems should be
identified by completing a - ✔✔job hazard analysis
Bundles of shingles and other roofing materials should be placed -
✔✔directly over rafters or trusses
OSHA requires that a fall protection plan be prepared for any project where
workers will be above the
ground surface at a height of more than - ✔✔6'
When selecting a point to tie off your own body harness, you should always
choose an anchorage point that
is - ✔✔capable of supporting at least 5,000 pounds
A yellow tag on a scaffold means that it - ✔✔does not meet all safety
standards
A portable brake is used - ✔✔to bend flashing materials
When using a shingle hatchet, the sliding gauge is used to measure the -
✔✔amount of exposed surface for each shingle
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
and Answers 100% Solved | Rated A+
. Before beginning a roofing project, potential safety problems should be
identified by completing a - ✔✔job hazard analysis
Bundles of shingles and other roofing materials should be placed -
✔✔directly over rafters or trusses
OSHA requires that a fall protection plan be prepared for any project where
workers will be above the
ground surface at a height of more than - ✔✔6'
When selecting a point to tie off your own body harness, you should always
choose an anchorage point that
is - ✔✔capable of supporting at least 5,000 pounds
A yellow tag on a scaffold means that it - ✔✔does not meet all safety
standards
A portable brake is used - ✔✔to bend flashing materials
When using a shingle hatchet, the sliding gauge is used to measure the -
✔✔amount of exposed surface for each shingle
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
