Carpentry 1 Module 7 Exam Questions
and Answers 100% Solved | Rated A+
Ceiling joist span the narrow dimensions of the building from - ✔✔Top plate
to top plate
Which is not true about ceiling joist? - ✔✔They provide a nailing surface for
finishing material
The upper ends of the outside ends of ceiling joists must be cut----- - ✔✔To
match the rafter pitch
The type of roof that has four side running towards the center of the
building is called - ✔✔Hip Roof
The roof framing system in which carpenters assemble joists and rafters
on-site is called_____ - ✔✔A stick-built system
Letter A indicates the ______. (Figure 1, pg. 40 and Figure 7, pg. 9) -
✔✔Run
Letter B indicates the _______. (Figure 1, pg. 40 and Figure 7, pg. 9) -
✔✔Rise
1
©NINJANERD 2024/2025. YEAR PUBLISHED 2024.
and Answers 100% Solved | Rated A+
Ceiling joist span the narrow dimensions of the building from - ✔✔Top plate
to top plate
Which is not true about ceiling joist? - ✔✔They provide a nailing surface for
finishing material
The upper ends of the outside ends of ceiling joists must be cut----- - ✔✔To
match the rafter pitch
The type of roof that has four side running towards the center of the
building is called - ✔✔Hip Roof
The roof framing system in which carpenters assemble joists and rafters
on-site is called_____ - ✔✔A stick-built system
Letter A indicates the ______. (Figure 1, pg. 40 and Figure 7, pg. 9) -
✔✔Run
Letter B indicates the _______. (Figure 1, pg. 40 and Figure 7, pg. 9) -
✔✔Rise
1
©NINJANERD 2024/2025. YEAR PUBLISHED 2024.
