Carpentry: Module 2 Test Exam
Questions and Answers 100% Solved
In a tree, growth takes place in the - ✔✔Cambium Layer
The term S-GRN means that the lumber - ✔✔Has a moisture content over
19 percent
A piece of lumber 3" in thickness and 8" wide would be described by which
of these grading classifications? - ✔✔Joists and planks
If lumber is graded as double-end-trimmed, its ends are trimmed -
✔✔Reasonably square on both ends
Ground-contact-grade pressure-treated-lumber has a preservative retention
of - ✔✔0.40 pounds per cubic foot
Plywood layers (plies) with grain at right-angles to the core are called -
✔✔Crossband
Plywood that is typically used to manufacture doors, furniture, and cabinets
is known as - ✔✔Hardwood plywood
The type of hardboard that is coated with oils and resins during its
manufacture is - ✔✔Tempered hardboard
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, Which of the following types of sheet material is used in high-wear
applications such as concrete forms, cabinets, and countertops? - ✔✔HDO
Which of the following is not a characteristic of oriented strand board
(OSB)?
A. Dimensional stability
B. Stiffness
C. Fastener holding capacity
D. Attractive face grain - ✔✔Attractive face grain
An engineered wood product commonly used to make doors and other
millwork is - ✔✔LSL
A glulam beam consists of - ✔✔solid, kiln-dried lumber glued together
The typical aggregate content of concrete is approximately - ✔✔75%
The nominal dimensions of a typical concrete masonry unit are - ✔✔8 x 8 x
16 inches
Ten-guage steel studs are classified as - ✔✔structural steel studs
Which of the following is not a mission of the Occupational Safety and
Health Administration (OSHA)?
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
Questions and Answers 100% Solved
In a tree, growth takes place in the - ✔✔Cambium Layer
The term S-GRN means that the lumber - ✔✔Has a moisture content over
19 percent
A piece of lumber 3" in thickness and 8" wide would be described by which
of these grading classifications? - ✔✔Joists and planks
If lumber is graded as double-end-trimmed, its ends are trimmed -
✔✔Reasonably square on both ends
Ground-contact-grade pressure-treated-lumber has a preservative retention
of - ✔✔0.40 pounds per cubic foot
Plywood layers (plies) with grain at right-angles to the core are called -
✔✔Crossband
Plywood that is typically used to manufacture doors, furniture, and cabinets
is known as - ✔✔Hardwood plywood
The type of hardboard that is coated with oils and resins during its
manufacture is - ✔✔Tempered hardboard
1
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
, Which of the following types of sheet material is used in high-wear
applications such as concrete forms, cabinets, and countertops? - ✔✔HDO
Which of the following is not a characteristic of oriented strand board
(OSB)?
A. Dimensional stability
B. Stiffness
C. Fastener holding capacity
D. Attractive face grain - ✔✔Attractive face grain
An engineered wood product commonly used to make doors and other
millwork is - ✔✔LSL
A glulam beam consists of - ✔✔solid, kiln-dried lumber glued together
The typical aggregate content of concrete is approximately - ✔✔75%
The nominal dimensions of a typical concrete masonry unit are - ✔✔8 x 8 x
16 inches
Ten-guage steel studs are classified as - ✔✔structural steel studs
Which of the following is not a mission of the Occupational Safety and
Health Administration (OSHA)?
2
©NINJANERD 2025/2026. YEAR PUBLISHED 2025.
